Polyethylene Sheet Dealers in Goregaon East, Mumbai

• Material: HDPE
• Color: Black
• Condition: New
• Size: Customised
• Pattern: Plain

Mainly used for water retention including lining of lakes, ponds etc. Also used as a source to store water in huge quantities and artificial streams. Geomembrane are made from multiple layers of 100 % virgin HDPE fabrics combined together to form a strong and impermeable sheet. Geomembranes are synthesized to be waterproof so that they can retain water. Strong layers make Geomembranes rodent proof, wind proof and high strength Starting at 250 microns, most common weights are: 500 microns, 750 microns, 1000 microns

• Size: 8x12inchx10x14inch12x16inch
• Type: Ldpe Plastic Sheet
• Material: LDPE
• Shape: Rectangular, Square
• Thickness: 0.5-1gsm
• Application: Industrial
• Feature: Flexible
• Width: 100-200mm

Our LDPE Sheets are specifically made to provide excellent packaging solutions to the clients. We are a prominent Manufacturer and Supplier of different kinds of LDPE Sheets. LDPE Sheets, manufactured by us, are made from high quality granules thus ensure excellent packaging. The LDPE Sheets are available at reasonable price. Highlights Highly flexible Higher vibration dampening Shock absorbing capacity Available in standard sizes

• Size: Customised
• Type: Hdpe Geomembrane Sheet
• Brand Name: RAIN STORM
• Material: HDPE
• Shape: FLAT SIZE AS PER REQUIRED
• Style: Modern
• Thickness: 420-650 GSM
• Certification: ISO Certified, WITH AND WITHOUT ISI MARKING
• Application: WATER STORAGE
• Color: Black, GREEN/WHITE
• Feature: Recyclable, Shrink-Resistant, Waterproof, UV PROTECTED
• Technics: Coating, Woven
• Pattern: Coated, Plain
• Condition: New
• Width: Customised

• Thickness: 1.65 mm to 4.5mm thick
• Material: PE - HDPE/LLDPE
• Width: 1100 to maximum 1500mm

SanGrip T Rib Profile Sheets are flexible sheet liner with locking extensions in reinforced concrete pipe and auxiliary structures that effectively protect the exposed concrete surfaces from getting corrode for a longer time that can be measured in decades. T Rib Profile Sheets are designed to allow concrete to flow around them during casting, permanently locking the liner into place as an integral part of the concrete substrate. T Rib Profile Sheets have excellent resistant against abrasion, chemical.   Range : Thickness : 1.65 mm to 4.5mm thick Wide : 1100 to maximum 1500mm Length : as per Customer Requirements Material of Construction : PE - HDPE / LLDPE   PE  Liners can also be jointed and sent in Rolls or Tube form as per customer requirements.Features : Excellent resistance to corrosive chemicals, gases such as hydrogen sulphide, acids, alkalis, and highly offensive salts. Permanent bonding to concrete substrates prevents de-lamination due to high groundwater backpressure Unaffected by continuous exposure to high humidity and water Joints are heat welded to form a continuous lining over the entire structure. If damaged, it can be repaired quickly and easily by removing the damaged area and welding another piece in its place. Flexible liner is able to bridge cracks in the structure without peeling of the T-Lining material Strong sanitary bacteria and ever-growing fungus do not affect the T-Lining. Highly effective resistance to gas penetration   Typical Properties : Thermoplastic :  SanGrip T-RIB remains flexible within a wide temperature and between 75 degrees C and 40 degrees C. T-RIB also remains stable throughout a wide band of temperature range, making its user friendly and easy to work with.   Weldability : Can be welded at any time over its lifespan using a variety of Welding methods : Hot air Fusion – Speed weld Hot wedge type Extrusion type   As a Tank Lining : ideal for a wide range of chemicals and can withstand continuous immersion up to 71 degrees C, but upper temperature limits depending on type and concentration of chemical.Dielectric Strength : SanGrip T-RIB is a non-conductor of electricity and resists electrolysis. The dielectric strength of the basic resins [using ASTM D149 test method, short time test] is 400-850 volts per Mil (25 Microns) of thickness.Water Absorption Rate : (% change maximum in original weight) to ASTM D 570. Results are 0.1% over first 24 hours then the rate drops rapidly. Total absorbed amount is not increased over prolonged period.Water Vapour Transmission Rate : Using ASTM E96 test method, [38 degrees C and 100% relative humidity] the transmission rate is about 0.020 (per 100 square inches per day) for 1.5mm thickness sheet.Co-efficient of Linear/Thermal expansion : ASTM D696 Test method gives a rate of 1.2 x 10-4 per degree C rise in temperature. SanGrip T Rib Liner Sheets do not exhibit significant contraction / expansion differentials to concrete. Hardness – Shore Durometer 'D' is 55 at 25 degrees C. (ASTM D 2240 test method).Tensile test of T-RIB lining/Weld Strength (ASTM D638 Test Method) : Mainline Sheet : Average around 3600 psi (25 N/MM2) Field Weld All type   Shear Test : Parent material fails before weld.Elongation of T-RIB Sheet : From 600% for HDPE to 900% for LLDPE and special resin HDPEs Abrasion Resistance : ASTM D1044 test method. Wheel CS17 with loading of 1 kilogram. Weight loss is around 18mg per 1000 cycles. Coefficient of Friction : To ASTM test method D1894; static value 0.74 Kinetic Value : 0.55   Specific Gravity  (ASTM D792) : *Specific Gravity for LLDPE is 0.92 *Specific Gravity for HDPE is 0.93+   Tear Resistance (ASTM D1004 Die C) : Test Method - Thickness 1.82 mm /Average 300N.Low Temperature Brittleness (ASTM D746 ) : Test Method : -94 degrees F. Modulus of Elasticity (Secant Modulus) :Expressed in Pounds per square inch. 15,000 psi for LLDPE 25,000 psi for HDPE   Chemical Resistance :After conditioning to constant weight at 43oC (110o F) tensile specimens and weight change specimens shall be exposed to the following solutions for a period of 112 days at 25o ±3oC(77o ± 5o F)At 28-day intervals, tensile specimens and weight change specimens shall be removed from each of the chemical solutions and tested. If any specimen fails to meet the 112-day exposure, the material will be subject to rejection.   Applications Concrete Lining Precast Concrete pipes Tunnels Basement Protection Pulp and Paper Acid Picking Tanks Manholes Bleach Storage Tanks Fertilizer Storage Tanks Chemical Waste Lines Galvanizing Tanks Digester Tanks Concrete Ceilings in Corrosive area Grit Chambers Alum Storage

Hdpe, also known as high density polyethylene is a commonly used standard polyethylene. Hdpe is used in various types of applications where great impact and tensile strength are needed while absorbing little moisture and being corrosion resistant. Typically material can be extruded up to 1” thick and pressed to make thicker sheets. Skiving is a method of pressing large billet of material then skiving (cutting) the desired thickness out of the larger billet. thickness: 0.5 mm – 25 mm standard size: 1 x 2 mtrs, 1.3 x 2mtrs, 8’ x 4’, 1.5x3 mtrs color: white , black

• Thickness (mm): Width x Length (m)
• 20 - 75: 1.23 x 2.15
• 08/01/75: 1.23 x 1.99
• 06/01/50: 1.00 x 2.00
• 20 - 100: 0.66 x 2.52

NovaStrong is made from UHMW-PE, a subset of the thermoplastic -polyethylene. It has extremely long chains, with molecular weight numbering in the millions, usually between 2 and 6 million, strengthening intermolecular interactions resulting in highest impact strength of any thermoplastic, very low coefficient of friction, self-lubricating, and is highly resistant to abrasion (15 times more resistant to abrasion than carbon steel). Its coefficient of friction is significantly lower than that of Polyamide and Acetal, and is comparable to that of PTFE, but UHMWPE has better abrasion resistance than PTFE.   Features & advantages of NovaStrong UHMW-PE Sheets: High Abrasion Resistance Low Specific Weight Low water absorption Odorless Good Low temp Resistance Low Coefficient of Friction High chemical resistance High Impact Strength Food Safe Protection from Stress Cracking Weathering Resistance  Transporting machinery Star Wheels, Idler Sprockets Textile machinery Bottling Machinery Food processing machinery components Harbor and shipbuilding machinery Architecture & agriculture machinery Conveyor Systems Paper-making machinery Dyeing decoration Abrasion Resistant Lining Mining Industry Shipping Industry Chemical Equipment Chute liners and Truck /hopper liners

• Thickness: 1,1.5,2,3,4,5 mm

PE Material has a very good chemical resistance and a high resistance to stress cracking against many organic and inorganic media. It stands out for its high toughness with good stiffness. The operating temperature ranges from 500C to 750C.

• Thickness: 1mm to 20mm
• Size: 1 mm to 20 mm-Width1000mm to 1500mm Length 2000mm or Customized
• Colour: Natural & Black
• Surface Finish: Both Side Gloss

AND Global Sales Corporation is engaged in trading and sourcing of HDPE sheets that are in high demand in the domestic market and finds wide application in different industries. These are dimensionally accurate, durable, resistant to abrasion and high in performance. These sheets are used in the construction materials for chemical, mechanical and electronic industry such as: Tanks, Lab Equipments, Semiconductor Processing Equipments, Plating barrels, Etching Equipments, Machined Parts & Industrial Doors.   Key Features Good electrical properties Lightweight, no poison Very good welding and processing properties Excellent impact strength and twisting endurance Excellent chemical and corrosion resistance Harder than PP sheets

• Size: 100x75-150x75Inch, 25x25-50x25Inch, 50x50-100x50Inch, 5x5-25x25Inch
• Type: Polyethylene Sheet
• Material: Polyethylene Plastic
• Thickness: 11-13mm, 13-15mm, 15-17mm, 17-20mm, 3-5mm, 5-7mm, 7-9mm, 9-11mm
• Application: Chemical Storage, Packaging
• Color: Creamy, Off White, White
• Condition: New, Recycled
• Texture: Hard, Soft
• Feature: Eco Friendly, Good Quality, Heat Resistance, High Strength, Non Breakable, Perfect Shape

• Thickness: 0.2 to 20 mm(extruded)
• Color: Black
• Width: Maximum 2200 mm
• Material: HDPE
• Finish: Glossy, embossed and matt

• Material: LDPE
• Thickness: Other
• Brand Name: Jhaveri Plastics
• Pattern: Plain
• Packaging Type: Roll
• Features: Waterproof

• Material: LDPE
• Thickness: 16 micron
• Color: Transparent
• Country of Origin: Made in India
• Width: 11 Inch
• Usage/Application: Packaging
• Packaging Type: Roll

hm hdpe sheet, Box Strapping, zip lock

Uhmwpe Sheets, Pvc Rods, Nylon Sheets, Pvc Rod, pph sheet, PVC Rigid Sheets

high density polyethylene sheet, Plastic Sheets, Non Woven Carpet

Panel Mounting Fuse Holder, Dc Plug, Solar Junction Box, Earthing Clamp

HDPE And LDPE Sheets, Mulch Films, Rubel Bags On Roll, pe heat shrink film

rubble sack, garbage bags on roll, T-Shirt Bags, GARBAGE BAGS - FLAT PACKED

Moulded Backing Flanges PE Blind Flanges, Dredging Rubber Hoses, Gas Pipes