POOJA INTERNATIONAL Dahisar, Mumbai, Maharashtra

6 Pc. Wiretwister Pliers Set Made in the USA - Quality and Availability Wire Twister Pliers and Safety Wire Are Used for Safety-Wiring Fasteners in Aviation and Other Applications Such as Engines, Gearboxes or Any Assembly Where Vibration May Cause Fasteners to Back Out Includes 0.020", 0.032", 0.041" Spools of Stainless Steel Safety Wire

Weight : 50 Kg

Color : Grey

Voltage : 220-240 V | 50 Hz

Warranty : 1 Year

Brand Name : Lavor

7 Pc. 3/8" Drive 12 Point SAE Torque Wrench Adapter Set Meet Applicable Aerospace Standards Changes A 3/8" Square Drive Torque Wrench (Or Ratchet) Into A 12-Pt. Box End Wrench Configuration The Box End Wall Thickness is Specially Designed to Provide Strength While Still Allowing Ample Room for Access to Reach Restricted Fasteners. Measure Exactly 2 Inches From Center of Adapter Opening (Fastener) to the Center of Square Drive for Easy Torque Calculations Formula to Determine Torque Wrench Setting Using A Torque Adapter: {Desired Torque to Fastener * Length of Torque Wrench} / {Length of Torque Wrench * Adapter Center to Center Distance (2")} This Calculation Assumes That the Attachment is Aligned with Torque Wrench Handle When Torqueing Fastener PART#ITEM NAME 64-753 3/8" Drive 12 Point SAE Torque Wrench Adapter 7/16" 64-755 3/8" Drive 12 Point SAE Torque Wrench Adapter 9/16"

3/8" Drive 12 Point SAE Torque Wrench Adapter 7/16" Meet Applicable Aerospace Standards Changes A 3/8" Square Drive Torque Wrench (Or Ratchet) Into A 12-Pt. Box End Wrench Configuration The Box End Wall Thickness is Specially Designed to Provide Strength While Still Allowing Ample Room for Access to Reach Restricted Fasteners. Measure Exactly 2 Inches From Center of Adapter Opening (Fastener) to the Center of Square Drive for Easy Torque Calculations {Desired Torque to Fastener * Length of Torque Wrench} / {Length of Torque Wrench * Adapter Center to Center Distance (2")} This Calculation Assumes That the Attachment is Aligned with Torque Wrench Handle When Torqueing Fastener

Overall Length : 2.750 in

5 Pc. Tool Steel Cold Chisel Set Made in the USA - quality and availability Manufactured from shock resistant tool steel for unequalled strength, toughness, and durability; higher hardness without brittleness Full shank heat treat is a 2 step process where the entire length of the tool is hardened and tempered, then the struck end is drawn back for to resist "mushrooming" and "chipping" extending the life of the tool Cutting edges are ground to precise angles for efficient cutting and long live Modified parabolic head directs the striking force to the center of the tool for greater resistance to "mushrooming" and "chipping" Black oxide finish with 2 polished panels for easy size identification and visible "wear safety goggles" reminder Hex stock fits more securely in a punch & chisel holder and also reduces the tendency to roll on work surfaces   PART#ITEM NAME 70-329 Tool Steel Cold Chisel 1/2" x 7/16" x 6" 29-407 Vinyl Roll 5 Pockets

Material : Tool Steel

Tongs with Double End Jaws 1/4" to 2-1/2" Made in the USA - Quality and Availability Designed for Hand-Tightening Various Threaded Connections Around the Rigsite Consisting of a Handle, a Set of Gripping Die Teeth, a Length Of Flat Chain and a Hooking Slot Where the Chain may be Adjusted to Fit the Pipe Double End Jaws with Teeth on Both Ends Allow the Operator to Turn Pipe in Either Direction without Removing the Tong or Unhooking the Chain. Jaws can be Reversed if Teeth Become Burred or Dull Jaws are Drop Forged from Alloy Steel with Precision Milled Teeth and then Heat Treated For Long Life and Durability Flat Link Chain is Manufactured in-House from Alloy Steel and Heat Treated. After Heat Treat Each Chain is Proof-Tested to 2/3 of its Breaking Strain and Shipped with a Seal Indicating it has been Tested Meets or Exceeds US Federal Spec. GGG-W-651E Meets or Exceeds US Federal Spec. GGG-W-651E

  Features 4 Standard models Spring-Return

Tether Ready Lineman's Plier Tether-ready Professional Plier for Safe Use While Working at Height Stainless Steel Ring Has No Welds and Runs Through the Metal of the Plier Handle Providing a 2:1 Safety Factor High Leverage Design - The Joint Rivet is Closer to the Cutting Edges to Provide More Cutting Power Precision Machined Cutting Edges Meet at the Hinge for Improved Cutting Performance Induction Hardened Cutting Edges for Extended Life Jaws Have Diamond Serrated Gripping Tips for Gripping and Twisting Textured Black Over Blue Double Non-Slip Dip Grips for Working Comfort Made in the USA

32mm Black Oxide 12 Point 45° Offset Striking Wrench Made in the USA - Quality and Availability For Use Where a Hammer or Sledge is Required to Create Extreme Force / Torque Necessary to Loosen or Tighten Large Fasteners Large Striking Surface for More Efficient Hammer Contact, More Force Being Applied to the Fastener Offset Round Handle Design to Clear Obstructions Handle Length Permits Use in Confined Areas Box End Opening is Designed to Remain Engaged to the Fastener When the Wrench is Struck Heavy Box End Opening Provides Greater Transmission of Torque and More Strength While Also Providing Access to Confined Fasteners Manufactured From High Alloy Steel Using the Most Up-To-Date Manufacturing Process and Heat Treat for Greater Strength and Durability

Overall Length : 11.000 in

Standard Head One-Piece Dead Blow Hammer 10 oz. Made in the USA - quality and availability Steel shot filled canister creates a dead blow effect; sustains impact, maximizes force , reduces / eliminates rebound, and absorbs the shock of impact Non-sparking hot cast urethane covers steel shot chamber and steel reinforced handle; no exposed metal Hot cast urethane face will not mar surfaces or absorb liquids. resists chipping and splitting while reducing noise when striking metal objects Steel reinforced handle provides added strength and safety by resisting breaking on overstrike Textured handle with a flanged butt end for a sure non-slip grip Safety red urethane for high visibility Meets or exceeds US Federal Spec. GGG-H-33a

Handle Material : Cushion

42 Pc. 3/4" Drive 12 Point SAE Standard and Deep Mechanics Tool Set Meets or Exceeds ASME B107.1-2002, B107.10M and US Federal Spec. GGG-W-641E Extra heavy duty gauge metal box with full hinge is specifically designed for large drive size socket sets EYE-D™ markings on the sockets optimize size visibility, also providing SAE / metric differentiation - Socket sizes are also cut into the foam Ratchet has a compact head design, recessed reversing lever, Unique "I-Beam" handle design, as well as the "Torque Wrap" design incorporating a 15 degree ratcheting arc Socket wall dimensions are optimized to provide strength while retaining access to restricted fasteners Meets or Exceeds ASME B107.1-2002, B107.10M and US Federal Spec. GGG-W-641E PART#ITEM NAME 13-124 3/4" Drive 12 Point Standard Socket 3/4" 13-126 3/4" Drive 12 Point Standard Socket 13/16" 13-128 3/4" Drive 12 Point Standard Socket 7/8" 13-130 3/4" Drive 12 Point Standard Socket 15/16" 13-132 3/4" Drive 12 Point Standard Socket 1" 13-134 3/4" Drive 12 Point Standard Socket 1-1/16" 13-136 3/4" Drive 12 Point Standard Socket 1-1/8" 13-138 3/4" Drive 12 Point Standard Socket 1-3/16" 13-140 3/4" Drive 12 Point Standard Socket 1-1/4" 13-142 3/4" Drive 12 Point Standard Socket 1-5/16"

The easy and convenient and economical way of mounting medium size bearing is by using UNIQUE SPIRALELECTRICAL HEATER. Even today we find quiet a few outdated methods being followed and their shortcomings are beinghigh lighted over here. Use of naked flame for e.g. is risky and does not ensure uniform heating. If an oil bath is used it may  resultin dirt entering the bearing. Dripping of hot oil is not only hazardous but also messy. In fact they are against today’s ecologicalnorms Use of hammers or other pressing forces may damage the bearing and cut short its life. Thus the ideal solution for medium  sizebearing is to heat and mount by UNIQUE SPIRAL ELECTRICAL HEATER. They are eco friendly. EASY TO USE:• Connect the unit to the suitable electrical point• Mount the suitable coil at the center point. And switch on the unit.• Select the required temperature.• Place the bearing or the heating component on the centering support.• Press the start button.The spiral heater does the rest and will automatically switch off when the desired temperature is reached. Removethe heated job by the special hand gloves provided with unit and mount the same in placeFEATURES :The UNIQUE SPIRAL HEATER is supplied with heating coils of 1 KW and 75 KW. 1 KW coil is used for heating  bearingof bore size 55 mm to 100 mm. The 1.75 KW coil is used for heating the bearings of bore size 100 to 150 mm .. The heating coilscan be easily changed since they are just of plug in type. The unit ensures uniform heating through the centering support Thetemperature control sensor is in contact with the inner ring of the bearing. Once the set temperature is reached the same can beseen on the display panel and one can hear the audio alarm signaling the job has been heated. The unit is provided with a microswitch which switches off the current once the job is heated to the set temperature. This is an additional safety feature provided.Apart form bearing couplings, cams rings etc. can also be heated to an accuracy of +I- 2 deg C    

10 Pc. Spark Plug Wire Gauge Set Made in the USA - Quality and Availability Feeler Gauges Are Mostly Used in to Measure Gap Widths - the Clearance Between Two Parts For Easy Identification, Each Blade is Permanently Marked with the Blade Thickness.

Soft Face Hammer Tip 1" Super Soft Gray Made in the USA - quality and availability Soft face tips are color coded to indicate degree of hardness Tips thread directly into hammer head and seat in head through a friction fit Tips will not mar surfaces or absorb liquids Resists chipping and splitting while reducing noise when striking metal objects Hardness Conversion: Soft Rubber Meets or exceeds US Federal Spec. GGG-H-33a

Color : Gray

Diameter : 1.00 in

13" Socket Rail Steel Made in the USA - Quality and Availability Heavy Gauge Steel and Bright Plated Clips Sold in Standard Package of 10 Pieces Only

Color : Chrome

Material : Steel

6 Pc. Slotted Tip Square Shaft Screwdriver Set Made in the USA - Quality and Availability Precision Machined, Blasted Tips Provide Superior Fit Between the Tip and the Fastener Reducing Slippage and Fastener Wear Full Shaft Heat Treat Provides Superior Strength That Resists Tip Wear and Shank Twisting / Breakage Fully Polished Chrome Plated Blade Provides A High Luster That Prevents Corrosion Tri-Lobe Handle Conforms to the Hand for Optimal Power and Comfort Solid Impact Resistant Acetate Handle for Uncompromising Durability Broad, Shallow Flutes with Chamfered Edges Provide A High Efficiency, High Torque Handle with No Sharp Edges Larger Than Average Handle Lengths and Diameters for Optimal Power and Comfort Domed Handle for Comfortably Applying Added Pressure Meets or Exceeds ASME B107.15-2002 and US Federal Spec. GGG-S-121 E   PART#ITEM NAME 66-203 Acetate Slotted Screwdriver 3/16 x 4" 66-208 Acetate Slotted Screwdriver 1/4 x 4" 66-217 Acetate Slotted Screwdriver 5/16 x 6" 66-220 Acetate Slotted Screwdriver 3/8 x 8" 66-226 Acetate Slotted Screwdriver 7/16 x 12" 66-232 Acetate Slotted Screwdriver 1/4 x 1.5" 29-412 Vinyl Roll 6 Pockets

10" Slip Joint Pliers Made in the USA - Quality and Availability Curved Portion of Serrated Jaws Are Designed for Gripping and Turning Round Objects Such as Pipes, Rods and Pins; Flat Portion of Serrated Jaws at the Tip for Gripping Flat Objects Two Jaw Positions with Shear-Type Wire Cutter Specially Designed Fastener Ensures Permanent Plier Assembly with Smooth Operation Textured Black Over Blue Double Non-Slip Dip Grips for Working Comfort Manufactured From High Alloy Steel Using the Most Up-To-Date Manufacturing Process and Heat Treat for Greater Strength and Durability Meets or Exceeds ASME B107.23m

Features Single-acting, spring return Equipped with high-flow coupler and dust cap Mounting collar designed to hold full force. Smooth piston resist friction and corrosion Solid plunger with hardened saddle Coupler Port G3/8 Tilting saddle is available(optional) Handle is available(optional) Special size is available(optional)

5" Screw Starter, Slotted Screws Made in the USA - Quality and Availability Positive Gripping Action Holds Screws in Place So They Can Be Started in Awkward, Hard to Reach Areas Blade Separates to Securely Hold the Fastener Meets or Exceeds US Federal Spec. GGG-S-121 E

5 Pc. Screw Extractor Set Made in the USA - Quality and Availability The Style Preferred By Professionals Since Straight, Tapering Flutes Grip More Securely Than Spiral Styles Will Not Cause the Screw or Pipe Being Removed to Expand and Bind Can Be Used for Either Right or Left Handed Screws, Bolts, Studs, or Pipe Threads Drill A Hole in the Broken Screw, Bolt or Stud; Lightly Tap the Extractor with A Hammer; and Turn it with A Wrench. Meets or Exceeds US Federal Spec. GGG-E-936B   PART#ITEM NAME 29-418 Vinyl Roll 5 Pockets 70-950 Screw Extractor 1/8" 70-952 Screw Extractor 3/16" 70-954 Screw Extractor 15/64" 70-956 Screw Extractor 5/16 70-958 Screw Extractor 3/8"

Screw Extractor 1/8" Made in the USA - Quality and Availability The Style Preferred By Professionals Since Straight, Tapering Flutes Grip More Securely Than Spiral Styles Will Not Cause the Screw or Pipe Being Removed to Expand and Bind Can Be Used for Either Right or Left Handed Screws, Bolts, Studs, or Pipe Threads Drill A Hole in the Broken Screw, Bolt or Stud; Lightly Tap the Extractor with A Hammer; and Turn it with A Wrench. Meets or Exceeds US Federal Spec. GGG-E-936B

3/4" Satin Chrome Thin Pattern Service / Pump Wrench Made in the USA - Quality and Availability A Thin Head Angled 30° and a Short Handle Allow Wrenches to Fit Into Areas with Limited Clearance. Manufactured From High Alloy Steel Using the Most Up-To-Date Manufacturing Process and Heat Treat for Greater Strength and Durability Meets or Exceeds US Federal Spec. GGG-W-636E Meets or Exceeds US Federal Spec. GGG-W-636E

Rubber Mallet, Fiberglass Handle 2 lb.   Made in the USA - quality and availability Solid, non-sparking, non-marring rubber head Fiberglass handle provides balance and is permanently bonded to the head Comfortable black cushion grip Meets or exceeds US Federal Spec. GGG-H-33a

7 Pc. Ratcheting Flare Nut Wrench Set Made in the USA - Quality and Availability Designed for Use on 6 and 12 Point Tube Fittings, Fasteners, Valves and Compression Fittings. High Carbon Steel Jaws Snap Open, Then Close Around Fastener with 6 Point Contact. Unique Design Requires Only 30° Rotation for Ratcheting Action. Prevents Distortion of Thin-Walled Fittings. Allows Easy Access to Tight Locations. Manufactured From High Alloy Steel Using the Most Up-To-Date Manufacturing Process and Heat Treat for Greater Strength and Durability PART#ITEM NAME 28-312 3/8" Black Oxide Flare Nut Ratcheting Wrench 28-314 7/16" Black Oxide Flare Nut Ratcheting Wrench 28-316 1/2" Black Oxide Flare Nut Ratcheting Wrench 28-318 9/16" Black Oxide Flare Nut Ratcheting Wrench 28-320 5/8" Black Oxide Flare Nut Ratcheting Wrench 28-322 11/16" Black Oxide Flare Nut Ratcheting Wrench 28-224 Full Polish Combination Flare Nut Wrench 3/4" 29-436 Vinyl Roll 7 Pockets