Back Back
Blender Cum Roaster
Get Price Quote
1 Piece (MOQ)
The complete drying plant compromises Rotary Cascade Dryer, Air Heater, Dryer Inlet Hood, Exhaust Hood, Exhaust Air Fan & Ducting and all necessary Controls. Duty : To Dry about 750 Kg/hr. of Chilly Flakes from approximately 20% initial moisture to 8-10 % final moisture. Dryer Drum: 3 Ft Diameter X 28 Ft. long dryer drum fabricated in Stainless Steel plate SS-304, with internal flights and lifters fabricated and bolted to Stainless steel angle sections welded to the shell plates to ensure adequate contact between the drying air and the material being processed. The drum is fitted with two cast or forged steel tires, mounted on carbon steel spacer blocks fitted to a reinforcing band. The tires run on four cast or forged steel support rollers shrunk to fit on steel shafts with shaft-mounted spherical roller bearing Plummer blocks. A segmental cast steel chain ring is fitted around the periphery of the dryer drum. Support Frames : The complete dryer drum assembly is supported on two fabricated carbon steel roller support frames, the feed ends support frame carrying the locating roller assemblies. Both roller support frames are fitter with safety guards. Drum Drive : The dryer drum is driven by a T.E.F.C. electric motor through a V-belt drive, gearbox, pinion, and chain to the drum drive chain wheel. The motor, gearbox, V-belt, etc. are mounted on a fabricated carbon steel baseplate. All drives are completely enclosed in suitable safety guards. Air Heater : The drying air is provided using Electrical Operated, firing into a refractory lined carbon steel combustion chamber connected to the dryer inlet end hood. It can also be operated with an Electrical Heater of 30 KiloWatts rating. Inlet End Hood : The inlet end of the drum is enclosed with a Stainless steel fabricated enclosure, complete with a labyrinth seal and stainless steel material inlet chute. The inlet hood is supported by a suitable rolled steel section support structure. Outer End Hood: The outer end of the drum is enclosed with a carbon steel fabricated hood complete with an inspection access door, and exhaust air outlet chute. A labyrinth-type flexible seal is fitted to the rear hood plates around the drum opening. The outlet end is supported by a suitable rolled steel section support structure. Exhaust Air Fan : The exhaust air is drawn from the dryer by a centrifugal fan, complete with an electric motor, V-belt drive, and drive guard. Exhaust Air Ducting : The exhaust air from the dryer is conveyed via a Stainless steel duct from the outlet end hood to the cyclone and from the cyclone to the exhaust fan. A manually operated butterfly-type valve damper is fitted in the exhaust duct between the cyclone and the exhaust fan. Control System : Inlet air temperature is measured using a thermocouple located in the inlet end hood connected to a temperature indicator/recorder. Exhaust air temperature is measured by a thermocouple located in the exhaust air duct connected to a temperature indicator/recorder. The Electrical output is controlled using a suitable Thermostat via a suitable transmitter from either of the two temperature indicator controllers. All necessary motor control gear, relays, overloads, etc. and temperature indicators/recorders are housed in a carbon steel control cabinet which will be prewired for correct sequential start-up and operation of the plant.
Double Cone Blender
Get Price Quote
* Capacity 3ltrs to 3000ltrs * Mounted on sturdy tabular stand * Driven through a gear box coupled with electrical motor * PLC with MMI & VFD with pneumatically operated butterfly valve at discharged * Automatic loading & unloading facilities
Best Deals from Powder Mixers
Automatic Double Cone Blender
150,000 Per Unit
Double Cone Blender
Get Price Quote
Double cone blender comes in a standard and compact design. All the powder and granules are loaded into the cone for the mixing process to start. Only two-thirds of the cone is filled to ensure complete mixing. The cone of the double cone blender is placed statistically so the chances of overload on the mixture are eliminated. The paddle type baffle in the cone strategizes the uniform mixing in the cone. The stipulated time is taken to mix which may vary depending on how difficult the substance to be mixed may be. The side-valve then helps in the discharge of the mixed material. The double cone blender has a polished surface which makes it very easy to be cleaned manually.
Ribbon Blenders
Get Price Quote
Leveraging on the state of the art facility and refined technology, we have been able to establish ourselves as a leading player in the industry. We offer Ribbon Blenders to our valued customers at lucrative price. These boast prominent features like loner working life and sturdy construction. They are available for our customers at reasonable price. Our excellent distribution system enables you to get them delivered to your doorstep in no time.
v cone blender
Get Price Quote
1 Unit (MOQ)
Double Cone Blender
100,000 Per Piece
1 Piece(s) (MOQ)
We manufacture Double cone blender suitable for blending dry or semi-dry powders, minerals, solid mixtures, fibrous materials and granular materials. Serves pharmaceuticals, chemicals, pigments, metals, ceramics, foods, cosmetics, plastics, agricultural & other industries.Conical shape and elongated plane both ends enable uniform mixing and easy discharge. The cone is statically balanced which protects the gear box and motor from any excessive load. Powder is loaded into the cone through a wide opening and discharged through a butterfly or a Slide valve. Paddle type baffles can be provided on the shaft for better mixing, uniform blending and de-agglomeration.Offered with internal agitators, liquid addition nozzles, vacuum outlets, heating and cooling jacket, temperature probes, removable shells, discharge valves and various accessories.
double cone blender machine
300,000 - 1,000,000 Per NOS
1 NOS (MOQ)
double cone blender machine, Fluid Bed Dryer (FBD), Rapid Mixer Granulator
Ribbon Blender
Get Price Quote
Available in Standard & GMP Model with contact parts in SS 304 / SS 316. Made from 14G ss sheet having quickly opening lid and mirror finish, running on heavy duty ball bearing driven by oil filled worm gear - box and powered by suitable electric motor complete with starter and safety guard locks. Easy and dustless operation. Model available for 50Kgs - 1000kgs
Double Cone Blender
250,000 Per Piece
1 Piece(s) (MOQ)
The Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products, etc.
Mass Mixer
Get Price Quote
Mass mixer is efficient to be used for mixing dry and damp material. It is ideal for tablet granulation. Vessel is fitted with dust cover so that black particles cannot enter into it, make it safe for use. Salient Features : Standard and GMP model with contact parts in SS 304/ SS 316 quality. Specially designed flush type outlet valve or butterfly valve (optional). Top cover with acrylic sheet. The cover is connected to limit switch for the safety purpose. Machine automatically stops as soon as the cover is opened during the operation for the safety of operator. Shaft sealing at inside and out side with teflon bush and SS stuffing box at outside. Solid stainless steel end covers and frame work on the trough in even standard models for long trouble free life of the machine. Features : Suitable for mixing wet and dry powders. Paddle type blades. Provided with leak proof seal tilting arrangement, limit switch with s.s. Grill. S.S 304 / 316 quality and mirror polished unit with suitable motor and gear box. Manual tilting arrangement model 25, 50, 100, 200 and 250 kgs. CGMP model with documentation (iq, dq, pq, oq) - as option.
Ribbon Blender
90,000 Per unit
V Blender
Get Price Quote
GMP's "V" Blenders that are suitable for mixing of solid-solid or solid with liquid (Maximum 10%) in powder or granulated form. The mixer has a "V" shaped body held by two horizontal half shafts and bearing blocks mounted on a sturdy tubular structure. These blenders offer homogeneous blending with low shear blending action that prevents excessive fines or changes to particle shape and size.
mass mixers
190,000 Per Piece
Conta Blenders
700,000 Per Piece
We offer a wide variety of Conta Blenders, which are immensely used for homogeneous mixing and lubrication of granules or powder in phrama, chemical and other allied industries. Our range of conta blenders provide better performance and work on the principle of dust free transfer of powders or granules at different stages. These conta blenders are fabricated using premium grade raw material and are in compliance with GMP standards. RequestCallback Yes! I am interested
Ribbon Blenders
Get Price Quote
We manufacturer in Ribbon Blenders which is a mixing device comprising helical ribbon blenders shaped blades rotating close to the edge of a U-shaped vessel used for relatively high viscosity fluids and dry blends. Our products are generally manufactured using high quality stainless steel and alloy steel. Ribbon Blenders are used to blend a wide range of materials used in different industries including the food, chemical, pharmaceutical, plastic and mineral industries. Ribbon Blenders are mainly used to mix different materials using different types of blades to make a good quality homogeneous mixture. Including Ribbon Blenders, V Blenders, Cone Screw Blenders, Screw blenders, Double Cone Blenders, Double Planetary High Viscosity Mixer, Counter-rotating, Double & Triple Shaft, Vacuum Mixer, Planetary Disperser, High Shear Rotor Stator and Dispersion Mixers, Paddle, Jet Mixer and Mobile Mixers.
Powder Mixers
285,000 Per Piece
Ribbon Blender
Get Price Quote
1 Unit (MOQ)
Double Cone Blender
95,000 Per Piece
Jacketed Reactor
Get Price Quote
In Jacketed reactor, a jacket is welded on the shell to provide steam, thermic fluid circulation etc. This jacket can be made of Mild steel or Stainless steel as per the application of the user. The design of jacket can be of two type .i.e. Single stage or Double stage. A stiffener is welded on shell to withstand the pressure developed in the jacket and it also helps in proper distribution of steam and oil. Reaction vessel drive is specially designed for Maintenance and Trouble Free Performance.
Double Cone Blender
Get Price Quote
We are offering double cone blender. •model available 25ltrs to 5000ltrs •conical shape at both ends enables uniform mixing and easy discharge. •cone statically balanced to avoid any excessive load on the gearbox and motor. •discharged through a mucon valve or slide alve. •paddle type baffles can be provided on the shaft for better mixing. •flame – proof motor can be supplied as an option.
cooler mixer
Get Price Quote
cooler mixer
Double Cone Blender
Get Price Quote
cosmetic machinery, herbal machinery, chemical machine, cosmetic machinery
Conta Blender
Get Price Quote
Conta Blender, Rapid Mixer Granulator, Inline Homogeniser Mixer
Ribbon Blender
Get Price Quote
air jet mill
Jacketed Reactor
Get Price Quote
Jacketed Reactor, Industrial Air Conditioner, perforated tray
dry mixer machine
Get Price Quote
dry mixer machine, battery lexoxide plant, Grid Casting Machine
ribbon blender machine
Get Price Quote
Milling Machine, Colloid Mill Machine, vacuum dryers
Ribbon Blender
Get Price Quote
Containment Isolator
bin blender
Get Price Quote
bin blender, Auto Coater
Filter by Localities
