Back Back
Blender Cum Roaster
Get Price Quote
1 Piece (MOQ)
The complete drying plant compromises Rotary Cascade Dryer, Air Heater, Dryer Inlet Hood, Exhaust Hood, Exhaust Air Fan & Ducting and all necessary Controls. Duty : To Dry about 750 Kg/hr. of Chilly Flakes from approximately 20% initial moisture to 8-10 % final moisture. Dryer Drum: 3 Ft Diameter X 28 Ft. long dryer drum fabricated in Stainless Steel plate SS-304, with internal flights and lifters fabricated and bolted to Stainless steel angle sections welded to the shell plates to ensure adequate contact between the drying air and the material being processed. The drum is fitted with two cast or forged steel tires, mounted on carbon steel spacer blocks fitted to a reinforcing band. The tires run on four cast or forged steel support rollers shrunk to fit on steel shafts with shaft-mounted spherical roller bearing Plummer blocks. A segmental cast steel chain ring is fitted around the periphery of the dryer drum. Support Frames : The complete dryer drum assembly is supported on two fabricated carbon steel roller support frames, the feed ends support frame carrying the locating roller assemblies. Both roller support frames are fitter with safety guards. Drum Drive : The dryer drum is driven by a T.E.F.C. electric motor through a V-belt drive, gearbox, pinion, and chain to the drum drive chain wheel. The motor, gearbox, V-belt, etc. are mounted on a fabricated carbon steel baseplate. All drives are completely enclosed in suitable safety guards. Air Heater : The drying air is provided using Electrical Operated, firing into a refractory lined carbon steel combustion chamber connected to the dryer inlet end hood. It can also be operated with an Electrical Heater of 30 KiloWatts rating. Inlet End Hood : The inlet end of the drum is enclosed with a Stainless steel fabricated enclosure, complete with a labyrinth seal and stainless steel material inlet chute. The inlet hood is supported by a suitable rolled steel section support structure. Outer End Hood: The outer end of the drum is enclosed with a carbon steel fabricated hood complete with an inspection access door, and exhaust air outlet chute. A labyrinth-type flexible seal is fitted to the rear hood plates around the drum opening. The outlet end is supported by a suitable rolled steel section support structure. Exhaust Air Fan : The exhaust air is drawn from the dryer by a centrifugal fan, complete with an electric motor, V-belt drive, and drive guard. Exhaust Air Ducting : The exhaust air from the dryer is conveyed via a Stainless steel duct from the outlet end hood to the cyclone and from the cyclone to the exhaust fan. A manually operated butterfly-type valve damper is fitted in the exhaust duct between the cyclone and the exhaust fan. Control System : Inlet air temperature is measured using a thermocouple located in the inlet end hood connected to a temperature indicator/recorder. Exhaust air temperature is measured by a thermocouple located in the exhaust air duct connected to a temperature indicator/recorder. The Electrical output is controlled using a suitable Thermostat via a suitable transmitter from either of the two temperature indicator controllers. All necessary motor control gear, relays, overloads, etc. and temperature indicators/recorders are housed in a carbon steel control cabinet which will be prewired for correct sequential start-up and operation of the plant.
Ribbon Blenders
Get Price Quote
Leveraging on the state of the art facility and refined technology, we have been able to establish ourselves as a leading player in the industry. We offer Ribbon Blenders to our valued customers at lucrative price. These boast prominent features like loner working life and sturdy construction. They are available for our customers at reasonable price. Our excellent distribution system enables you to get them delivered to your doorstep in no time.
Best Deals from Powder Mixers
Double Cone Blender
100,000 Per Piece
1 Piece(s) (MOQ)
We manufacture Double cone blender suitable for blending dry or semi-dry powders, minerals, solid mixtures, fibrous materials and granular materials. Serves pharmaceuticals, chemicals, pigments, metals, ceramics, foods, cosmetics, plastics, agricultural & other industries.Conical shape and elongated plane both ends enable uniform mixing and easy discharge. The cone is statically balanced which protects the gear box and motor from any excessive load. Powder is loaded into the cone through a wide opening and discharged through a butterfly or a Slide valve. Paddle type baffles can be provided on the shaft for better mixing, uniform blending and de-agglomeration.Offered with internal agitators, liquid addition nozzles, vacuum outlets, heating and cooling jacket, temperature probes, removable shells, discharge valves and various accessories.
Double Cone Blender
Get Price Quote
* Capacity 3ltrs to 3000ltrs * Mounted on sturdy tabular stand * Driven through a gear box coupled with electrical motor * PLC with MMI & VFD with pneumatically operated butterfly valve at discharged * Automatic loading & unloading facilities
0.0
View Profile
double cone blender machine
300,000 - 1,000,000 Per NOS
1 NOS (MOQ)
Double Cone Blender is an efficient and versatile machine for mixing of dry powders and granules homogeneously. All the contact parts are made of stainless steel. The effective volume for optimum homogeneity is between 35-70% of gross volume. The SLANT double cone design eliminates dead spots. The conical shape at both ends enables uniform mixing and easy discharge. The cone is statically balanced which protects the gear box and motor from any excessive load. Powder is loaded into the cone through a wide opening and discharged through a butterfly or a Slide valve. Depending upon the characteristic of the product, paddle type baffles can be provided on the shaft for better. Contact parts are made of SS 304 or SS 316. Flame proof electricals can be provided as optional. 'Slant' design (off centre) CLIN CONE BLENDER. Dust free bin charging system ensures minimum material handling. Mixing, uniform blending and de-agglomeration.
0.0
View Profile
Double Cone Blender
Get Price Quote
All contact parts SS 304/ SS 316. Available in standard and GMP model. Made from 14G. SS sheet having quick opening lid and mirror finish, running on heavy duty ball bearing driven by oil filled worm gear box and powered by suitable electric motor complete with starter and safety guard locks. Easy and dustless operation. Model available for 50 kgs. to 500 kgs. Cap.For Gentle and Diffusive Blending of Dense Powders suitable for Blending of Large Batch Volumes in a short time.
0.0
View Profile
Double Cone Blender
250,000 Per Piece
1 Piece(s) (MOQ)
The Cone Blender is an efficient and versatile machine for mixing dry powder and granules homogeneously. All the contact parts made out of stainless steel of required grade by customer. Two third of the volume of the Cone Blender is filled to ensure proper mixing. It can be used for Pharmaceutical, Food, Chemical and Cosmetic products, etc.
0.0
View Profile
Mass Mixer Machine
280,000 Per Piece
1 Piece(s) (MOQ)
0.0
View Profile
Double Cone Blender
Get Price Quote
Double Cone Blenders are versatile machines used for mixing dry powder and granules homogeneously. These machines have a cylindrical shell with two conical frustums provided with opening for charging and discharging.
0.0
View Profile
v cone blender
120,000 Per Piece
The rotating shell V Cone Blender are used only for dry mixes and have no packing glands(seals) around shafts entering the chamber to cause potential problems. Modifications such as the addition of baffles to increase mixing shear have been made to these type of blenders.
0.0
View Profile
tank mixer
100,000 Per Piece
0.0
View Profile
Ribbon Blenders
Get Price Quote
We manufacturer in Ribbon Blenders which is a mixing device comprising helical ribbon blenders shaped blades rotating close to the edge of a U-shaped vessel used for relatively high viscosity fluids and dry blends. Our products are generally manufactured using high quality stainless steel and alloy steel. Ribbon Blenders are used to blend a wide range of materials used in different industries including the food, chemical, pharmaceutical, plastic and mineral industries. Ribbon Blenders are mainly used to mix different materials using different types of blades to make a good quality homogeneous mixture. Including Ribbon Blenders, V Blenders, Cone Screw Blenders, Screw blenders, Double Cone Blenders, Double Planetary High Viscosity Mixer, Counter-rotating, Double & Triple Shaft, Vacuum Mixer, Planetary Disperser, High Shear Rotor Stator and Dispersion Mixers, Paddle, Jet Mixer and Mobile Mixers.
0.0
View Profile
Mass Mixer
Get Price Quote
Mass mixer is efficient to be used for mixing dry and damp material. It is ideal for tablet granulation. Vessel is fitted with dust cover so that black particles cannot enter into it, make it safe for use. Salient Features : Standard and GMP model with contact parts in SS 304/ SS 316 quality. Specially designed flush type outlet valve or butterfly valve (optional). Top cover with acrylic sheet. The cover is connected to limit switch for the safety purpose. Machine automatically stops as soon as the cover is opened during the operation for the safety of operator. Shaft sealing at inside and out side with teflon bush and SS stuffing box at outside. Solid stainless steel end covers and frame work on the trough in even standard models for long trouble free life of the machine. Features : Suitable for mixing wet and dry powders. Paddle type blades. Provided with leak proof seal tilting arrangement, limit switch with s.s. Grill. S.S 304 / 316 quality and mirror polished unit with suitable motor and gear box. Manual tilting arrangement model 25, 50, 100, 200 and 250 kgs. CGMP model with documentation (iq, dq, pq, oq) - as option.
0.0
View Profile
Ribbon Blender
Get Price Quote
1 Unit (MOQ)
0.0
View Profile
Double Cone Blender
95,000 Per Piece
0.0
View Profile
Ribbon Blender
90,000 Per unit
0.0
View Profile
mass mixers
190,000 Per Piece
0.0
View Profile
Ribbon Blender Mixer
335,000 Per Piece
1 Piece (MOQ)
0.0
View Profile
Double Cone Blender
Get Price Quote
Double cone blender comes in a standard and compact design. All the powder and granules are loaded into the cone for the mixing process to start. Only two-thirds of the cone is filled to ensure complete mixing. The cone of the double cone blender is placed statistically so the chances of overload on the mixture are eliminated. The paddle type baffle in the cone strategizes the uniform mixing in the cone. The stipulated time is taken to mix which may vary depending on how difficult the substance to be mixed may be. The side-valve then helps in the discharge of the mixed material. The double cone blender has a polished surface which makes it very easy to be cleaned manually.
0.0
View Profile
double cone blender machine
Get Price Quote
Main Features :- All Contact Parts SS 316 / 316L as per cGMP Standard.Double Cone shaped with cylindrical shell at centre & conical shape at both ends.Well balanced to avoid any excessive load on gearbox or motor.Baffle is provided for better mixing.Manhole with gasket is provided to fix the baffles and for ease of cleaning the shell.Charging and discharging is through a butterfly valve.A conical adaptor can be provided for fixing charging drum after butterfly valve.Inching arrangement can be provided.All Moving parts are enclosed in guards.A safely railing with a limit switch is provided for operator safety.ACVFD for variable speed
0.0
View Profile
Filter by Localities
Post Free Ad
