Power Belt India New Link Road, Mumbai, Maharashtra

The optibelt AGRO POWER V-belt will be the classic of all drive belts due to its diverse application areas. Its qualities come to full effect in the difficult drives of agricultural machinery. If combinations of belt sets are required where several V-belts are used per drive, these have already been taken into account.Profile :5; Y/6; Z/10; A/13; B/17; 20; C/22; 25; D/32; E/40; SPA/SPB/SPC/SPZ

The optibelt AGRO POWER variable speed belts are used for a continuously adjustable speed.The special belt design allows for high dynamic loads and excellent power transmission and control characteristics. This product features high-quality fibre-reinforced rubber components combined with low-stretch tension cords and a cover fabric.Profile :Belt back width up to 90 mm Belt thickness between 5 and 30 mm

The optibelt OMEGA RB timing belt with additional ribbed PK belt section on the backside of the belt is perfect for use in mills, e.g. food, corn, fruit and flour mills, where the backside pulley has a reversable direction and slipping is necessary when the drive blocks.Profile :8M or 14M with PK surface

Drive pulleys for frictional- or positive connections according to drawings or description in all standard profiles and materials.

Optibelt RR round section belts are made from high quality polyurethane using a special manufacturing process. They are produced as open-ended belts in various diameters and are available by the metre. The optibelt RR Plus version incorporates a polyester tension cord. The round section belts with tension cords are particularly low-stretch are therefore especially useful where longer transport distances need to be covered.Profile :Diameters from 2 to 20 mm

The optibelt AGRO POWER variable speed belts are used for a continuously adjustable speed. The special belt design allows for high dynamic loads and excellent power transmission and control characteristics. This product features high-quality fibre-reinforced rubber components combined with low-stretch tension cords and a cover fabric.

optibelt ALPHA linear track timing belts are a compound construction of timing belt and V-profile guide, manufactured in one process and thus forming a homogenous unit.ALPHA linear track timing belts are produced in an open length and can be welded to form a continuous, endless belt.ALPHA linear track timing belts are mainly used when large lateral forces are a factor and for running on timing belt pulleys when flanged pulleys are not desirable. The compound construction of timing belt and V-guide, manufactured in one process step, results in timing belts running with precise directional stability.They are commonly used in the transport and material handling applications.Profile :T5, T10 available AT5, AT10 projected

The optibelt ALPHA TORQUE is made from abrasion-resistant polyurethane with a hardness of 86 Shore A. Good resistance to oil plus a certain resistance to acids and alkaline solutions are standard features of this polyurethane. The optibelt ALPHA TORQUE can be reinforced with tension cords made of steel, highly flexible steel, stainless steel, aramid, polyester or Vectran to suite a wide range of applications.Profile :T 2.5; T5; T10DT 2.5; DT5; DT10AT5; AT10MXL; XL; L  

Open-ended optibelt ALPHA LINEAR timing belts are made of extruded, thermoplastic polyurethane with tension cords parallel to the edges. The belts are dimensionally stable and their precise positioning makes them ideal for use in linear drive systems.The optibelt ALPHA LINEAR timing belt can also be given a thin fabric covering on the tooth side in order to reduce friction and noise. Fabric can also be applied to the belt back.

optibelt ALPHA linear track timing belts are a compound construction of timing belt and V-profile guide, manufactured in one process and thus forming a homogenous unit. ALPHA linear track timing belts are produced in an open length and can be welded to form a continuous, endless belt. ALPHA linear track timing belts are mainly used when large lateral forces are a factor and for running on timing belt pulleys when flanged pulleys are not desirable. The compound construction of timing belt and V-guide, manufactured in one process step, results in timing belts running with precise directional stability.

Optimat V-belts are open-ended and are connected in an endless manner using a flexible connector once the belt length has been determined.Optimat V-belts can be adjusted to corresponding lengths for all centre distances without any problems whatsoever. The belts can be supplied in any required length completely depending on the requirements of the drive.Storage is simple and economical. With Optimat belts, it is not necessary to store different belt lengths for all possible uses in the warehouse. Optimat belts can be cut to the correct length according to the required drive on location.Open-ended belting can be applied even when dealing with fixed centre distances. In the event of the belt stretching, the belt can be shortened in a few minutes. Optimat belts enable a quick installation, especially when using drives with a limited amount of access or drives with limited available space. The drive does not have to be dismantled when the belts have to be removed.Profile :Y/6, 8, Z/10, A/13, B/17, 20, C/22, 25, D/32, E/40    

  optibelt ALPHA LINEAR SPECIALThe ZS / ZSi timing belt joint The timing belt joint ZS / ZSi is designed to allow repeated detaching and joining of timing belts in the plant itself.Versions are available for the AT10, T10 and H profiles.Both versions are offered in stainless-steel as standard for the AT10 and H profiles. For the T10 profile, the tooth side inserts are made of brass.The PINJOIN timing belt jointThe PINJOIN timing belt joint is designed for permanently joining belts, one time only, in the plant. Version available for profile AT10.The connection is made by means of stainless-steel threaded pins that fit into laterally drilled holes running longitudinally through the tooth.Profile :T10; AT10 for widths of 25, 32 and 50 mm H for widths of 25.4, 38.1 and 50.8 mm  

Consistent further development of the production process, improved materials, low-stretch polyester cords and optimised moulded cogs are the basis for this new belt generation.optibelt Super E-POWER M=S allow complex drive solutions in the whole area of machine construction under the most difficult conditions and extreme operational demands.Profile :XPZ, XPA, XPB, XPC, 3VX/9NX, 5VX/15NX

The Optibelt ALPHA linear timing belt (with approval of the Food and Drug Administration) for the direct conveyance of food supplements the broad product range of Optibelt timing belts made of polyurethane. The “blue” timing belt has a hardness of 85 Shore A and is optionally equipped with an aramid or steel tension cord.The thermoplastic polyurethane surface is perfectly suitable for different coatings as well as for the welding of cams and conveyor cleats. Profile :Aramid tension cord: T5; T10 Steel tension cord: T10; T20; AT10; H; 8M Different profiles on request  

Elastic ribbed belts sections EPH and EPJ consist of a: *  superstructure*  elastic tension cord section*  base The superstructure is made from a fibre-reinforced rubber mixture. The fibres are laid perpendicular to the direction of belt travel and stabilise the belt during dynamic operation.The tension cord is a high modulus polyamide material embedded in a rubber compound and covers the entire width of the ribbed belt. The rib compound is characterised by a high wear resistance.Profile :EPH, EPJ

These belts are used if several pulleys are located on one level and the direction of rotation of one or multiple pulleys is to be changed. The OPTIBELT double section V-belt is ideally suited for use in typical serpentine designs.No special grooved pulleys are required for the application of optibelt DK double section V-belts. The standard grooved pulleys of the corresponding sections can be applied. They are mainly used in agricultural machines and increasingly also in general engineering.Profile :AA/HAA; BB/HBB; CC/HCC; DD/HDD; 22 x 22; 25 x 22

The optibelt SRP timing belt with cast cams and coatings is manufactured in a single production step and used in conveying systems. The polyurethane is cast between the core mould and the special outer mould with correspondingly increased internal diameter or special outer moulds with the desired contour for the cams.By rotating the inner and outer moulds around the central axis, a shore hardness that differs from that of the teeth can be cast using a centrifugal casting process. Profile :The ALPHA SRP moulds are based on those of the ALPHA TORQUE and ALPHA POWER timing belts.

Due to its multitude of application possibilities, the optibelt VB is the classical model amongst the drive belts. The qualities of this product come into their own when dealing with difficult drives in agricultural machines just as well as when dealing with extraordinary drive solutions, for example with V-flat drives in machine construction. optibelt VB classical V-belts are S=C PLUS and are therefore unmeasured and can be used in sets. As the classical V-belt, the optibelt VB is used in many areas of the general machine construction sector as well as being used for special drives.Profile :5; Y/6; Z/10; A/13; B/17; 20; C/22; 25; D/32; E/40