Power International Bhandup West, Mumbai, Maharashtra

All CO2 welded, powder coated finish & using two vertical & one horizontal Aluminum rollers for taking heaviest cables round difficult corners. The assembly is of a robust construction for use in the most arduous conditions and can be linked together with stake pins provided to form a continuous corner roller system. Used for Cable Laying at corner / bends. Suitable for LT, HT, HV & EHV Cables.

All powder coated, heavy duty assembly suitable for cables upto 140mm dia. Steel frame fitted large waisted aluminium roller running on sealed bearings.

Straight roller with V-Assembly is used at specific site where Cables are very scattered & need to be centralized while laying. Stand frame & center rollers both are made up of MS. Used for LT, HT& HV cables.

We are offering straight roller - heavy duty. all powder coated,heavy duty assembly suitable for cables upto 160mm dia. Steel frame fitted large waisted solid aluminium roller running on sealed bearings & galvanized shaft.

Application : Structured/Buried

Material : Stainless Steel Grade- 304

We are main supplier of this product.

Application : Structured/Buried

Material : Stainless Steel Grade- 304

All CO2 welded, powder coated,  regular assembly suitable for cables up to 140mm dia. Steel frame fitted large waited solid aluminum roller made of pressure dye cast / large MS pipe running on rubber bushing with sealed bearings & galvanized shaft. Used for Cable Laying in straight lengths. Suitable for LT & HT Cables.

Power rollers work in conjunction with the cable pulling winch machine. One automated solid steel cable roller with rubber coating runs with the help of a motor. Second cable roller spring loaded is to sandwich the cable with variable cable diameter from 60mm to 180mm. Variable speed of roller rpm. Suitable for cable dia : 60–180 mm  Weight : 70 – 90 kgs With grouting arrangement With VFD, Control Panel & complete power roller set arrangement.

We are offering power pusher. ·         one automated roller running with the help of motor fitted on gear drive system. ·         second roller spring loaded the two rollers sandwiches the power cable & pushes it to lay it across the length of trench as required. The machine can be supplied with additional features such as vfd (variable frequency drive) & plc (programmable logic controller) with speed adjustments.

HDPE (High Density Polyethylene) clamps are mostly suitable for heavy duty cables as HDPE is sturdy and hard material. It is widely used for outdoor mounting of cables. It comes along with Galvanized Steel fasteners. Test Carries Out Polymer Identification Hardness Test Tensile Strength Melting Point test Lateral Load test Axial Load test Impact resistance test Sizes available 55-110 mm 130-150 mm

Lifting Capacities : 3.0 to 10.0 Ton Improved Screw Design Extra Strong Base Plate  Robust and Easy to Use Designed for Heavy Duty Use Easy to Handle and Simple Operation

Designed to place at the end of the manhole or pit entrance to ease the cable in. Triple Aluminium roller on tubular steel frame. Used for laying the cable inside a manhole. Suitable for LT, HT, HV & EHV Cables.

We are offering link box link box is electrically and mechanically one of the integral accessories of hv underground above ground cable bonding system, associated with hv xlpe power cable systems. Link boxes are used with cable joints and terminations to provide easy access to shield breaks for test purposes and to limit voltage build-up on the sheath lightning, fault currents and switching operations can cause over voltages on the cable sheath. The link box optimizes loss management in the cable shield on cables grounded both sides. In ht cable the bonding system is so designed that the cable sheaths are bonded and earthed or with sheath voltage limiters (svl) surge arrester in such way as to eliminate or reduce the circulating sheath currents. Link boxes are used with cable joints and terminations to provide easy access to shield breaks for test purposes and to limit voltage build-up on the sheath. The link box is part of bonding system, which is essential of improving current carrying capacity and human protection.

HTC Touch - in High Definition. Watch music videos and streaming content in awe-inspiring high definition clarity for a mobile experience you never thought possible. Seductively sleek, the HTC Touch HD provides the next generation of mobile functionality, all at a simple touch. Fully integrated with Windows Mobile Professional 6.1, ultrafast 3.5G, GPS, 5MP camera, plus lots more - all delivered on a breathtakingly crisp 3.8" WVGA touchscreen - you can take control of your mobile world with the HTC Touch HD. Features Processor Qualcomm® MSM 7201A™ 528 MHz Windows Mobile® 6.1 Professional Operating System Memory: 512 MB ROM, 288 MB RAM Dimensions: 115 mm x 62.8 mm x 12 mm / 146.4 grams 3.8-inch TFT-LCD flat touch-sensitive screen with 480 x 800 WVGA resolution HSDPA/WCDMA: Europe/Asia: 900/2100 MHz; Up to 2 Mbps up-link and 7.2 Mbps down-link speeds Quad-band GSM/GPRS/EDGE: Europe/Asia: 850/900/1800/1900 MHz (Band frequency, HSUPA availability, and data speed are operator dependent.) Device Control via HTC TouchFLO™ 3D & Touch-sensitive front panel buttons GPS and A-GPS ready Bluetooth® 2.0 with Enhanced Data Rate and A2DP for wireless stereo headsets Wi-Fi®: IEEE 802.11 b/g HTC ExtUSB™ (11-pin mini-USB 2.0) 5 megapixel color camera with auto focus VGA CMOS color camera Built-in 3.5 mm audio jack, microphone, speaker, and FM radio Ring tone formats: AAC, AAC+, eAAC+, AMR-NB, AMR-WB, QCP, MP3, WMA, WAV 40 polyphonic and standard MIDI format 0 and 1 (SMF)/SP MIDI Rechargeable Lithium-ion or Lithium-ion polymer 1350 mAh battery Expansion Slot: microSD™ memory card (SD 2.0 compatible) AC Adapter Voltage range/frequency: 100 ~ 240V AC, 50/60 Hz DC output: 5V and 1A Special Features: FM Radio, G-Sensor

All CO2 welded, powder coated, heavy duty steel assembly suitable for laying cables as per the required site condition. Steel rollers running on bearings & galvanized shaft.

A range of Trailer mounted Cable Pulling Winches require for the installation of Power Cables where high pulling tensions are required. All of the units are designed with the operator in mind. Simple in operation and robustly engineered, these units are fitted with heavy duty diesel engines powering hydraulic transmission for smooth controlled pulling, and are fitted with a console mounted line tension indicator so that at all times the operator has a visual display of the pulling force applied. Key Feature of Cable Pulling Winch Machine Double capstan system, both capstan heads are driven No chains between hydraulic engine and capstan system Hydrostatic drive Petrol or diesel engine Drum capacity for big rope lengths Automatic rope guidance to the drum Pre-tension-system Pulling force control by electronic measuring system with print out. Double axel chassis with overrunning brake, height adjustable drawbar Metal hood

Leg Pump Hydraulic Jack Can Fit Cable Drums from 900 mm to 3000 mm Steardy design, internationally accepted. Robust & easy to use Lifting Capacity from 3ton to 20ton Designed for heavy duty use

Application : Industrial

Color : Blue

Six vertical steel rollers each running on roller bearings and mounted in heavy duty steel frame Power coated finish. These rollers are used in conjunction with horizontal rollers as per the photograph and where large diameter cables have a limited bend radius.