Power Press Dealers in Fort, Mumbai

• Length and width of bed: 330 x 178 , 550 x 355, 585 x 406
• Length, Width, Depth: 1397 x 553 x 610, 1498 x 635 x 710, 1778 x 736 x 1016

We are one of the trusted manufacturers and suppliers of a wide range of Heavy Duty C-Type Inclinable Power Press. These are engineered using advanced machinery by our expert professionals in various models and specifications. Known for high operational efficiency, low maintenance cost and longer service life, these are demanded by our customers based all over India.

• Brand Name: AECO
• Material: MS
• Load (Ton): 90-120 Ton
• Speed: 1440 RPM
• Type of Press: H-Frame Press, C-Frame Press

We are the leading manufacturers, exporters and supplier of this products.

• Pressure in Tons for Steel: :
• Diameter of hole Thickness to be punched of sheet in inches x in inches x 80: Pressure in Tons for soft metal like Brass etc.
• :: Diameter of hole Thickness to be punched of sheet in inches x in inches x 65
• Example: :
• Find the pressure required of punching a hole 2" in diameter through 1/4" in steel stock Pressure in Tons : 2x1/4" x 80-40Tons: Example
• :: Find the pressure required for punching a rectangular hole 2" x 1.1/2" through 1/4" steel stock

Standard Accessories : Bolster Plate duly machined having T-Slots Hand operated oil lubrication Pump Hand safety device Special Steel Spanner for adjustment to lock Nutt Clamps for Holding dies Suitable Electric Motor 3 Phase Suitable Push Button Starter  Motor Pulley  Set of V-Belts  Belt Guard  Gear Guard

This is a C frame, single point suspension, non-inclinable single action press having Steel Plate construction duly stress relieved, with rolling key clutch mechanism.  This is a standard work horse machine for every press shop and supplied complete with electric motor, starter, gear and fly wheel guards, one shot lubrication device. Its available in eight models from 20 Tons capacity to 100 Tons. If required, inclining mechanism and motorized automatic lubrication system is offered at extra cost.

Description: Steel construction frame, fabricated from rolled steel plates with suitable cross ribbings. This reduces vibration under heavy load. Crank shaft is made of special alloy steel machined to closed accuracy and fitted in bronze bushes for smooth working, longer life and accuracy. The gears are steel fabricated. The high grade C.I. flywheel stores and releases sufficient power for pressing operation. The heavy duty table and ram are also made of high grade C.I. They are perfectly aligned to obtain high precision pressing output. The lubrication system allows smooth sliding surfaces and moving parts to increase the lifespan of the machine Specifications: (In mm unless specified otherwise)   Accuracy: As per IS Standard 8711 Application: Cutting, Bending, Punching, Embossing   Accessories:Inclination Arrangement

Simple Operction : Press is provided with motorised pump unit and a hand-operated, control valve. Pump is driven by flange coupled motor and has a pressure adjusting valve for adjustment of high pressure.High quality hydraulic unit : Cyclinder is made of special steel that secures absolute pressure tightness. The seals are made of special material and guarantee long life. PISTON ROD & PISTON HEAD are carefully ground and hard chrome plated to obtain closest, accuracy in guiding. Precision Pressing : Actual pressure may be read in tons from the precision pressure gauge that has red zone from maximum pressure and upwards. Press beds are planned off and as standard equipment. 2 PLANED OFF STRAIGHTEN V BLOCKS are supplied.

We are manufacturing , a wide range of Hydro - Pneumatic Press which is highly appreciated by our esteemed clients and demanded by various industries. These are manufactured using premium quality material and are designed as per international quality standards. Our range of presses is available in various models and designs with different specifications. We also provide customization as per the specifications detailed by our clients. Specification of Hydro- Pneumatic Presses :- 1). Tonnage : - 2T, 4T, 8T, 15T, 30 T 2). Total Travel STROKE (mm) : - 50 ,75,100,150 3). Power Stoke (mm) :- 6 ,12 ,24 4). Air Pressure require :- 3 Bar min and 6 Bar max 5). Air Quality :- Filtered (40 Microns) Lubricated. 6). Electrical Power :- 230 VAC , 5 AMP Working of Hydro - Pneumatic Press : It controlled by the manipulation of pressurized air. The air is forced into a tube which fills with the air and applies pressure that causes the press to move downwards. Once the press stroke is finished, the air is evacuated through valves and Mechanical Springs cause the pump to move upward again. Advantages of Pneumatic Press :- 1). Low consumption of air, thus minimum electricity consumption which, helps in cost reduction of final output. 2). Hydro - Pneumatic Presses greater advantages is their speed . They can move 10 times faster than hydraulic Press. 3). It is very versatile, able to be placed in factory in any position. 4). Easy to use 5). They have very few moving parts, making them very low maintenance . They have no fluid inside them , so no fear of leakage. Very few parts require Oiling. 7). Air tubes in a Hydro - Pneumatic Press can last upto five years without being replaced. 8). Simple operating system allows user to understand the mechanism quickly. 9). These presses can also be made to run on automatic cycles when automatic feeding arrangements are provided Application Areas :- Drawing Flaring, Pressing Squeezing, Edging Bending, Blanking Shearing, Riveting, Marking, Embossing, Forming , Peening, Crimping ,etc.

• Type: Automatic
• Certification: CE Certified
• Weight: 100-1000kg
• Voltage: 380V
• Power Source: Hydraulic
• Warranty: 1 Year
• After-Sales Service Provided: Spare Parts

We are the main supplier of this product.

C TYPE POWER PRESS

• Certification: CE Certified
• Color: Black, Blue, Brown, Grey, Light Green
• Voltage: 220V, 380V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Driven Type: Electric, Hydraulic
• Warranty: 1year, 2years, 5years

• Usage/Application: Industrial
• Power Source: Mechanical
• Material: Steel
• Color: Blue
• Load: 30-60 Ton
• Automation Grade: Semi-Automatic

Hydro Pneumatic Power Press Machine, Polypropylene Rods, Nylon Pad

Hydraulic Power Press, Hydraulic Scrap Baling Press, Static Hydraulic System

Power Presses, crankshaft grinders, Crankshafts, Forging Hammer

Maxx Double Power Drill Press

Mechanical Tyre Curing Presses, thermal power projects

C Type Power Press, Stud Type Welding Machine

Mechanical Power Presses, Transmission Equipment