Power Saws Dealers in Fort, Mumbai

We have come out as the foremost company for providing an excellent quality C.I Body Vertical Wood Cutting Bandsaw Machine that is known for high performance, longer service life, easy operations and sturdiness. We provide these band saw machines in various specifications, as per the ever-evolving requirement of our clients.

• Cutting Capacity (Round): 200
• Length of Stroke: 140
• Blade Size: 400 x 32 x 1.6

Hydraulic movement of cutting arm, The arm lifts out of contact of the work piece in the forward stroke to prevent damage to the blade or work piece, Three speed cutting feed controlled by a lever allows to adjust speed according to the material,Auto lift of cutting arm after job completion.

ensuring a parallel cut. This cut takes place on the draw stroke & the hydraulically liften out of contact with the workpiece on the forward stroke to prevent wear or the blade & can out metals of all kinds & strength. FEED : Two levers are provided at the pot one regulators the rate of feed while the other enabled the bow slide to be raised or forwarded hydraulically bow raised automatically & motor Switched off on completion of the cut. BED : The bed is of large proportion provided with guide ways for the vice for clamping the material vice is of rigid constructional. One jaw remains fixed & the other can be adjusted according the material to be cut.   ELECTRICAL EQUIPMENT :A direct on line push bottom starter can be fitted which incorporates & adjustable trip mechanism which stops the machine as soon as the blade is clear from the work non productive time is reduced to minimum. DRIVE : Power is supplied by a suitable electric motor through Vee-Belts which are full adjustable for tension all drive mechanism being totally enclosed. SPEED : The incorporation of two-speed driving mechanism allows for the most suitable speed to selected for material being cut. COOLANT : The Coolant tank is totally enclosed in the machine base & a Speed Pump supplies coolant to the saw blade through a stay put pipe & top.     Machine supplied with suitable electric motor with starter, wiring, mechanical coolant pump, set of V belt and vice - saw blade in extra cost Machine upto cutting are 16" are single hydraulic unit and 18", 20", 24" are having two hydraulic units

We are offering circular saw - radial type. Description mmt 925 (mm inch) max. Circular saw diameter 305 12" work table size 915 x 760 36" x 30" max. Depth of cut 50 2" power required - hp rpm 2 2800

• Material: HSS
• Country of Origin: Made in India
• Usage/Application: Industrial
• Surface Finishing: Polished
• Corrosion Resistance: Yes

These tools are used for cutting wood, non-ferrous metals, Steel sheets etc.  Dust removal, removable base-plate, lower guide roller, adjustable saw dust blower, and naturally 4 stage orbital motion, electronic control systems and powerful motor are the special features.

• Capacity Arm to saw: 610 mm
• Blade length: 125-150 mm
• Table size: 375 x 375 mm
• Table tilts: 15 Right 15 Left
• Thickness of cut: 50 mm
• Motor: 0.5 HP
• Motor RPM: 1440
• Speed 3 range 1: 1520
• Over all dimensions length: 1015 mm
• Width: 560 mm
• Height: 965 mm
• Throat Cap.: 24"
• Stroke Length: 25 mm
• Table Size: 14" x 10"
• Thickness of Cut: 25 mm
• HP Required: 0.5 / 1.0

• Type: Jig Saw Machine
• Application: Wood Cutting
• Weight: 10-100kg, 100-200kg, 200-300kg, 300-400kg, 400-500kg
• Color: Brown, Grey, Light White, White
• Voltage: 110V, 220V, 380V, 440V
• Condition: New, Used
• Automatic Grade: Automatic, Fully Automatic, Manual, Semi Automatic
• Power: 1-3kw, 3-6kw, 6-9kw, 9-12kw
• Warranty: 1year, 2years
• Driven: Electric, Hydraulic, Mechanical, Pneumatic

• Brand Name: Jai
• Motor: Three phase motor
• Power: 440 V
• Automation Grade: Automatic
• Cutter Shaft: 114/ 4.5 Inch
• Table Surface: 33.5 x 33 Inch

• Type: Wood Cutter
• Brand Name: Taparia
• Application: Wood Cutting
• Certification: CE Certified
• Color: Cyan
• Power Source: Electric

• Brand Name: Bosch
• Diameter: 7 1/4",8 1/4",12"
• Application: Extra-Fine Finish
• Grind Type: ATB
• Hook Angle: 10 Degree
• Kerf: 0.063"
• Speed: 7,900 rpm
• Plate Thickness: 0.043"

Our payment procedure is not only easy but also safe ensuring your long-term reliance upon us. Whether it is online payment procedure, cash, bank deposits or others, we are here to guide you throughout the process. We are working with a group of quality examiners who conduct several tests on the offered lot for confirming its compliance with the quality standards.

• Size: 25 X 25 X 1 MM
• Type: PU TUBECUTTER BLADES
• Brand Name: MULTITECH
• Material: STAINLESS STEEL
• Color: SILVER
• Feature: SHARP REPLACEABLE BLADES
• Finishing: SHARP FINISH
• Blade Material: STAINLESS STEEL
• Hardness: AS PER REQUIRED OF TUBES
• Model Number: PUCBS
• Application: POLYUREATHANE TUBE CUTTER SPARES
• Place of Origin: MUMBAI / NAVI MUMBAI

We offer Submerged Arc Welded Pipes Saw. SAW or Submerged Arc Weld, as the name suggests, is a manufacturing method for large diameter Welded Pipes. SAW pipes are mainly are classified into Helical Spiral SAW (HSAW) and Longitudinal SAW (LSAW). Generally large diameter pipes from Size 12¾� (324mm) onwards can be manufactured in LSAW construction and Size 16� (406mm) onwards in HSAW construction. SAW are manufactured as per various standards and specifications like the Indian Standards IS3589,IS1978,IS2129,IS5504 American Standards like ASTM A53, API 5L (up to X80), AWWA C � 200, ASTM A134, A139, A252, A381, A589, A671, A672, A691, A1005, and British Standards BS7191. SAW pipes are usually used by various industries and for various applications viz. Oil & Gas, Hydrocarbon & Process Industry, Water & Sewerage, Piling, Structural or industrial applications like the mining and dredging etc.

Hand Saw is a tool that is widely used for the purpose of carpentry and woodworking. With the help of a Hand Saw, wood is cut into different pieces and shapes as per the requirement. Hand Saw that we offer is widely demanded in automobile workshops, carpenters, small factories, engineering industries, building contractors, households, farms & gardens, etc. Our Hand Saw is provided with nine different adjustable angles on special zinc die cast handle, which makes cutting easier at difficult-to-reach positions.

Welding Process: - The Saw Blades or Wire Ends to be joined should be cut straight, exactly at right angles and free from burrs on special shearing attachment (optional equipment) - Welding Current, Upsetting Pressure and Upsetting Way are set according to the blade width - The blade ends are rigidly clamped in special quick acting clamps provided on the machine - By depressing the welding lever, the welding process begins - The two ends are heated to forging temperatures in a few seconds and are then automatically forged (upset). The welding current switches off automatically - The job is de-clamped and the weld completed Process for Annealing: The upsetting way switch lever is now turned to annealing and the job is clamped again with the extended jaw distance which comes in automatically on flipping the lever to annealing position. - By pressing the annealing switch on which two heat positions are provided, the job is annealed in order to normalize the brittleness of the welded area. - Depending on the type of material, the annealing process should be repeated several times if need be. Shearing Attachment (optional): Special shears with arrangement for mounting on the front of the machine are available Grinding Attachment (optional): Grinding attachment mounted on top of the machine is necessary for removing the welding flash

The company is specialized in the supplying and expiring of wide range of Piercing Saw Blades in the domestic as well as global market. Being a reputed player in the industry, we take utmost care of the efficient quality and performance of our range of Diamond Piercing Saw Blades. These Piercing Saw Blades are highly endurable and have sharp edge suitable for cutting as well as piercing. They are also offered at a highly reasonable price. In addition to this, we are reckoned as one of the reliable Piercing Scroll Saw Blade Exporters from India.

FULLY HYDRAULIC HACKSAW MACHINE

• Size: Standard
• Shape: Round
• Certification: ISI Certified
• Application: Wall Hole, Wood Hole
• Color: Grey
• Blade Material: Metal
• Surface Finishing: Coated

Ideal brand chain saw size 18” n 22” available in gasoline n electrical both includes chain n guide bar as standard acceserios.

Application Rip Saws: For ripping hard and soft woods like Beech, Pine, Belu etc., in Gang Saws. Utility Tools Products today is a market oriented manufacturer using the most modern manufacturing techniques to offer an interesting programme for producing precise cutting tools for Wood Working, Non-Ferrous, Ferrous and Plastics applications. It satisfies the demands of the Industries. Illustrated here are details of Tungsten Carbide Tipped Saws that are exported world over, made to DIN German stands and produced in our most modern Computer Numerically Controlled (CNC) plant. We produce standard saws as well as special saws for new material and for special burr free cuttings. We are your best source for any application Note: 1. Special Sizes on request. 2. Bore as required. Material AISI-A2 / AISI-D2 / HSS

• Power Consumption: 400 W
• Brand Name: Bosch
• Warranty: 6 Months
• Cutting Depth: 65 mm
• Weight: 1.7 Kg
• Voltage: 220 V
• Cable Length: 2.5 m
• No Load Stroke Rate: 3100 Spm
• Stroke Height: 18 mm

• Brand Name: YATO
• No Load Speed: 3800 rpm
• Blade Diameter: 165 x 16 x 2.4 mm
• Number Of Teeth: 24T
• Battery Voltage: 18 V
• Model Name/Number: YT-82810
• Power Source: Battery 2.0 Ah

• Brand Name: Business Tools Centre
• Dimension (LxWxT): 3000mm*27mm*0.90mm
• Shape: Rectangular
• Application: Metal Cutting
• Material: HSS

ROENTGEN MolyThe heavy duty saw blade made of HSS DMo5, German material no. 1.3343, for the highest demands, recommended for materials with a tension force up to 1.400 N/mm2. ROENTGEN Moly 7The heavy duty saw blade made of HSS DMo5, German material no. 1.3343 with precision ground teeth and a cutting angle of 7°. Available with toothing 4 tpi and 6 tpi, most suitable for cutting high alloyed and long chipped materials.   ROENTGEN Moly 13The heavy duty saw blade made of HSS DMo5, German material no. 1.3343 with precision ground teeth and a cutting angle of 13°. Available with toothing 3 tpi, suitable for cutting large diameters of high and highest alloyed materials. ROENTGEN 2-iksThe universal blade made of high speed steel suitable for general workshop use, insensitive to misuse. ROENTGEN bi-alfaThe saw blade made of bi-metal with tooth tips of HSS (M3).

• Brand Name: Makita
• Continuous Rating Input: 710W
• Blade Speed: 60m (200 ft) - 105m (350 ft) / min
• Dimensions: 508x188x256mm, (20"x7-3/8"x10-1/8")
• Net Weight: 6.0kg (13.1lbs)
• Model No: 2107FK
• Features: Large 120 x 120 mm (4-3/4" x 4-3/4") capacity with excellent tool balance., Bridge construction of aluminum frame and motor housing makes the machine more durable., Built-in fluorescent job light for clear view of ink line even in dark places., Switch for

• Warranty: 6 Months
• Weight: 3.4 KGS
• Brand: HITACHI
• Model Number: C 7SS
• Type: Power Tools
• BLADE DIA: 190 MM
• Applications: Wood And Metal Cutting With High Precision
• Max Cut Depth: 68mm @90 Degrees, 46mm @45 Degrees
• POWER: 1050 W
• SPEED: 5500 RPM

• Material: HSS
• Usage: Industrial
• Max Speed: 1400 rpm
• Shape: Circular
• Hardness: 65 HRC
• Thickness: 1-2 mm

Bone Saw, Foglio Chef Mat, Stendi Pasta Machine, Optional Cutter