Precision Gauges Dealers in Goregaon, Mumbai

Our prime interest is to deliver a flawless range of products to the buyers. And in this concern, we make all arrangements in order to store the entire lot under safe environment. Notable name in this field, we successfully cater to the demands of our clientele from Mumbai(India) to every nook and corner.   Exclusive Features of our Magnetic Oil Gauge Full body made out of Aluminium LM-6 Die Casting for zero leakage and better finish. Nitrophyl solid Float for Leak-proof float body. Gear teeth are completely Meshed for Smooth Movement of the pointer. Magnets are placed in a special manner to ensure complete Synchronization in their movement. UV proof pure Polyester powder-coated body finished with seven tank hot Chromatic cleaning process. Dial calibration and Alarm position can be set as per customer requirement.

• Dial Size: 2inch, 4inch, 6inch, 8inch
• Type: Pressure Gauges
• Material: Mild Steel
• Diameter in mm: 20-40mm, 40-60mm, 80-100mm
• Shape: Round
• Application: Liquid Pressure, Measuring Gas
• Color: Silver
• Display Type: Analog
• Operating Mode: Automatic
• Specialties: Accuracy, Easy To Fit, Measure Fast Reading
• Liquid Pressure in Bar: 1000-1500bar, 1500-2000bar
• Pressure: 10000-15000psi, 15000-20000psi, 5000-10000psi

• Feature: High & Low Value Alarm, Out Of Range alarm, Alarm On -Off Selection.,High accuracy, low drift measurements.

Puretronics Introduces Non-contact Laser Diameter Gauge and Online Controller In Collaboration With European Company. On-contact Measurement Technique Enable You to Stabilize Your Extrusion Process, Especially for Cable Production Lines. It Reduces Waste, Reduce Manpower, Save Raw Material, And Ensure Product Quality. It Is Easy To Setup And Use. It Is Made Of Aluminum Housing For Durability Even In Rugged Production Environments. It Is Insensitive To Product Vibration And Movement.

Electric contact pressure gauges are suggested where application is for control of pressure & for Audible or visible alarms. These gauges give electrical output which can be used to turn a motor onoff & similar applications. These gauges can be configured for a 1NO+1NC output or 1NO or 1NC or 2NO or 2NC output.

Digital surface gauge is a battery operated model. Which measures peak to valley height of a surface.

• Features: measures peak to valley height of a surface. The average reading of measurement provides an indication of the surface roughness
• Resolution: 1 micron ( 0.001 mm)
• Range: 0 – 1 mm, 0 – 10 mm

• Minimum Base Thickness: 0.3 mm
• Supply: Dry Battery 9 V (6 f 22).
• Instrument Size: 127 x 83 x 41 mm.
• Probe Size: D 18 x L 44 mm.
• Resolution: For Range 0 – 20 microns : 0.1 micron; For Range 20 – 2000 microns : 1.0 micron.
• Accuracy: 2 micreon or 2 % (Whichever is greater

Measures thickness of Non-conductive coatings on conductive base. It is for anodizing & coating on Brass & Aluminium. Interchangeable probe sleeve tip (A) having points for flat & spherical surface. Interchangeable probe sleeve (B) having V block for cylindrical surface.

• Dial Size: 2.5 inch / 63 mm
• Brand Name: Pioneer
• Pressure Range: 0 to 4 bar(0 to 60 psi)
• Application: Elecroplating
• Display Type: Analog
• Pressure Type: Absolute Pressure
• Connection Type: BSP
• Connection Size: 1/2 inch
• Dial Type: Liquid Filled
• Liquid Filling: Glycerine
•  :  

The Chatillon® DFS II Series with remote STS carries all of the features of the DFS II in a package that provides the user with the ability to perform torque measurements. The DFS II-R-ND allows the user to change STS sensors adding the flexibility of having one base indicator and several load cells to meet different testing needs. The head unit can also be used with SLC load cells providing one unit to perform all force and torque testing. The Chatillon® DFS II Series offers the best price performance of any digital force gauge available today. Our brand new DFS II Series of Digital Force Gauges is the first of their type to offer wireless data transfer and communication via integral Bluetooth.  This compact, easy-to-use force gauge is designed for basic and complex applications. Ideal for handheld or test stand applications, the DFS II may be equipped with integral load cells or smart remote sensors for load measurement or torque measurement. Measurement accuracy is better than 0.1% full scale in integral load cell or dedicated remote model. Use a Non-Dedicated Torque Sensor to expand the applications that can be performed by a single DFS II digital force gauge unit. Use a DFS II with a remote STS torque sensor to check product packaging security and the ability of a consumer to open the package. The remote torque sensor design is useful in allowing for a technician to easily move around a product and perform multiple checks on fasteners.

The ADARSH Homogenizer Gauge now lasts longer due to the new design feature incorporated inside the gauge. Generally homogenizer gauge is used in food, dairy industry on Homozenizer Machines. Since it is a hygenic application diaphragm seal is used. Further the presence of continuous pulsating media and that too at High Pressure causes failure of ordinary diaphragm gauges. At Adarsh a diaphragm seal has been specially designed to sustain this high pressure pulsation and vibration. Available upto ranges 700 kg/cm2, bar / 10000 psi. Specifications   4 100mm ( 4" )  & 150mm (6") Dial Sizes 4 Glycerin Filled 4 Bottom Direct Mount 4 SS304 Case & Ring IP65 4 SS316 Diaphragm 4 Available with Loose or Pre-installed 1-1/8" Flange 4 Pressure Range: 100 to 700kg/cm2 (other units bar, kpa, psi)   Options Available   4 1-1/8" Flange for Mounting 4 Custom Designed Dials 4 Electric Contacts 4 Accessories: Pulsation Dampner, Syphons, Gauge Cocks, Gauge Savers

• Scale Range: 700 kg/cm2, bar / 10000 psi.

Homogenizer Pressure Gauge it is a hygenic application diaphragm seal is used. Further the presence of continuous pulsating media and that too at High Pressure causes failure of ordinary diaphragm gauges. At Adarsh a diaphragm seal has been specially designed to sustain this high pressure pulsation and vibration. Available upto ranges 700 kgcm2, bar 10000 psi.

These gauges are used for measuring the level in a vessel.These can be used for maximum pressure of upto150kg/cm2 and a maximum temperature of 4000 C. Constructional features include upto 2.5 metre single piece construction with multiple glasses between process connections. A pair of auto shut off ball check valves in standard material of construction; Carbon Steel or Stainless Steel; Polypropylene as optional. WORKING PRINCIPLE The principle of Reflex Level Gauges is based on the difference in the refractive indices of liquid and vapour. The liquid column is contained within the recess of the liquid chamber behind the sight glass which is clamped to the gauge body. The sight glass has prismatic right angled grooves on the side facing the liquid and vapor space. Light rays entering from outside the gauge are either absorbed or reflected depending upon whether they enter the liquid or vapour space. When the ray of light encounters the surface of one of the grooves in the vapor space, it is reflected to the opposite surface of the grooves and from there, totally reflected back to the direction of observation. Thus vapour space appears as silvery white. When the light ray encounters the surface of the grooves in the liquid space, it is totally absorbed thereby the liquid behind the glass appear black.

• Brand Name: Adarsh
• Type: Pressure Gauge
• Condition: New Good
• Place Of Origin: Mumbai
• Min. Order Quantity: 1 (Set)
• Delivery Time: 1 week Min.
• Payment Mode: T/T,L/C & other

Looking for best and cost effective solution for corrosive media application ? Special Pressure Gauge for Chlorine Application and other corrosive media. Special low cost responsive anticorrosive diaphragm enables to function this gauge for long periods and that too at low cost.

• Type: Mendez
• Material: Titanium
• Increments: 10 Degree
• Gauge: 2 Degree
• Use: Surgical
• Surface: Polished

• Brand Name: Adarsh
• Material: Stainless Steel
• Certification: ISO 9001:2008 Certified
• Display Type: Digital & Analog
• Packaging Type: Corrugated Boxes
• Connection: Bottom Connection, Back Connection
• Dial Size: 2 Inch, 4 Inch, 6 Inch
• Display Size: 1/2 Inch, 1 Inch, 2 Inch
• Type: All Types
• Warranty: 1 Year

We are strategically based in Maharashtra(India) and are in proximity with the resources required for easy production process. All those who are looking for a responsible name supplying Coating Thickness Gauge can get in touch with us!

Magnetic Oil Gauge is used to show the level of Oil inside the conservator tank of the transformer. Additionaly it can also give an alarm when the oil level reduces below minimum andor maximum admitted level.

• Display Type: Analog
• Features: Top grade, Precision engineered, Easy to use, Very durable

• Feature: High accuracy, low drift measurements.,Rugged case construction sealed for longer life.
• Model: LAZER 2008
• Measurement Range: 0.8 – 35 mm
• Gate Size: 50 mm

Puretronics Introduces Non-contact Laser Diameter Gauge And Online Controller In Collaboration With European Company. Non-contact Measurement Technique Enable You To Stabilize Your Extrusion Process, Especially For Cable Production Lines. It Reduces Waste, Reduce Manpower, Save Raw Material, And Ensure Product Quality. It Is Easy To Setup And Use. It Is Made Of Aluminum Housing For Durability Even In Rugged Production Environments. It Is Insensitive To Product Vibration And Movement

low pressure capsule gauges, differential pressure switches

electrical pressure gauges, Control Valve, Hydraulic Filters

We are an eminent manufacturer, trader and supplier of an extensive array of Pressure Gauges. These are used to measure air pressure. Our offered products are designed as per the international quality standards. The entire range is examined on well-defined quality norms to ensure the delivery of flawlessness at the clients' end. In order to fabricate this range, we make use of the finest quality raw material and advanced techniques following industry norms. 90mm Dial (models HDP & HDP1) and 100mm Dial (model HDP2) 0-21 Kg./Sq.Cm (0-300 PSI) range Polished Stainless Steel, weather proof case Bourdon Tube: Phosphorus bronze / Monel UL Listed and FM Approved   Features: Elevated quality Accuracy User friendly

Steel Case, Black Powder Coated, chemical seal

sanitary clamp.

pressure guages, Level Indicators, manometers

digital gauges, Weighing Scales, shipping scales, Postal Scales

diamond tweezer, Scaife without Spindle, Digital Densitometer

Pie Gauge / Field Indicator

Pressure Gauges, Water Purifiers