Pressure Gauge Accessories Dealers in Mumbai

• Material: Stainless Steel
• Thickness (Millimetres): 4 - 8 mm
• Brand: Nishka
• Surface: Polished
•  :  

Hi-Pressure Instrumentation Valves Fittings & Hydro pneumatic accessories. For any valves inquiry please keep in contact with : trimurtiegg@yahoo.co.in

• Material: A105, A276 SS304, A276 SS316, Monel
• Test Pressure: 25 deg Room temperature
• Pneumatic: Body - 420 kg / cm2
• Gland Seal: Buna
• Finish: CS zinc plated and dichromated, SS – Natural
• Pack Type: Paper Packet

The adjustable pressure gauge snubber drawa unique taper. pin / Orifice design for high range of damaging. The damping can be adjusted the fluid and the pulsation.

• End Connection: NPT, BSP, BSPT, or as per customer requirement.
• Working pressure: 5000 Psi (344Bar).
• Temperature Rating: BRASS 400 Deg F (204 Deg C).

Gauge Snubber fittings protects pressure  gauges and instruments from system pressure surges and shock.   Pressure damping (snubbing) is accomplished through the use of a porous sintered SS 316 element. When snubber is installed up stream from a pressure instruments, the response rate of the instrument is reduced and generally varies with the initial pressure drop across the porous metal element, and allows the instrument to smoothly come to line pressure. Heat code traceability SPECIFICATION: Size : 1/4"F x 1/4"M1/2"F x 1/2"M1/4"F x 1/8"M1/2"F x 1/4"M1/2"F x 3/8"M S 316 1000 Deg F (538 Deg C).Optional Sour Gas service valves are available confirming to NACE Std. MR - 01 - 75.All Snubbers are 100% Factory tested prior to shipment. APPLICATION Refineries, liquid patroleum gas processing plant, petro-chemical plants, systems difficult to shur off due to solid contents dust, rust, dirt etc.Pneumatic Seat test is performed at 1/4 of working pressure.Hydrostatic shell test is performed at 1.5 times the working pressure.    

• Material: Stainless Steel
• Size: Customized
• Connection: 1/2 inch NPT
• Material Grade: SS316, SS304

• Standard: IS: 6901 Standard
• gas: Oxygen, Acetylene, Nitrogen, Argon, CO2 Gases
• Product Category: Industrial Regulators
• Model No: NSS-GPR-2219
• Type: Single Stage With Single Gauge
• Pressure: 1 And 1/2 Full Cylinder Pressure
• Diaphragms Material: Nylon Reinforced Neoprene Rubber

• Country of Origin: India
• Type: Syphon
• Material: Stainless Steel
• Shape: Round
• Certification: ISI Certified
• Application: Industrial
• Color: Grey
• Finishing: Polished

• Material: SS 316 / SS 304
• Size: 1/4 " to 1/2" NPT / BSP
• Seal: Viton
• Maximum Temperature: 120 Degree Cel
• Maximum Pressure: 6000 PSI

we are offering pressure gauge snubber.wiht the help of variable orifice, these gauge snubbers protect pressure gauges by reducing fluctuations .

We serve the countrywide market with an assortment of Pressure Gauge Snubbers, which we is fabricated by our hard working manufacturers. We are idolized as the responsive Manufacturer, Exporter and Supplier of Pressure Gauge Snubbers in Mumbai, Maharashtra. Our Pressure Gauge Snubber can be obtained from us at the best market prices. We take care of the entire logistics process – starting from the procurement to the final delivery – in an impeccable manner.

• Material: Stainless Steel | Carbon Steel | Alloy Steel | Haste alloy | Duplex | Super Duplex | Monel | Inconel
• Usage: Gas Line | Oil & Gas | Instrumentation | Petrochemical
• Certification: ISO
• Packaging Type: HDPE BOX | Corrugated Box | Wooden Box
• Country of Origin: India

We are a leading Manufacturer , Exporter and Stockist Of Snubber In India.We also Offer Ready Stock of Snubber in various sizes.These above products are available in the following Material & Grades:Stainless Steel Grades: 304 | 304L | 316 | 316L | 316TI | 321 | 347H | 310S | 317L | 904LCarbon Steel A106 Gr. B, A105 & Alloy Steel P1, P11, P12 & P22Alloy Steel, Hastelloy C22 & Hastelloy C-276.Monel 400 & Monel K-500Inconel 600, Inconel 601, Inconel 625, Inconel 750 & Inconel 825Titanium Gr.1, Titanium Gr.2, Titanium Gr.5,Duplex Stainless Steel & Super Duplex  

Pressure gauge snubbers are intended to suppress the effect of pressure pulses and pressure peaks. The snubber is provided with an adjustable needle valve that enables to restrict the flow as operating conditions may demand even if the snubber is in service. The carefully adjusted snubber will considerably increase the service life of pressure gauges at arduos conditions such found at reciprocating pumps and compressors, hydraulic presses or fluid power systems and will additional improve the reading accuracy of the fitted gauge. Overpressure protector are intended to protect the pressure gauge against the effect of pressure that exceed the maximum pressure rating of the pressure gauge. Next to providing protection at faulty process conditions, the over pressure protector may also be used to isolate low pressure indicator at a system that requires to alternatively read very low and rather high pressure.ressure gauge syphons are intended to protect the pressure gauge from the effect of hot pressure media such as steam and also to reduce the effect of rapid pressure surges. Condensate of the pressure medium that is collected inside the coiled portion of the syphon prevents direct contact. When first installed the syphon should be filled with water or any other suitable separating liquid.

• Setting Range: 1.0 to 400 bar
• Reset Value: -30% of set value
• Max. Working pressure: 500 bar

These are designed to protect pressure Instruments from over pressure exceeding The specified pressure range by sudden& Excessive pressure fluctuation from surge Or spike. This device blocks the higher Pressure exceeding the allowed value, until It comes back to normal, when system Pressure becomes normal.Hence this device Safeguards the pressure instrument, gauges, Switches or transmitters by blocking extra High pressure.

• Material: stainless steel
• Maximum pressure: 5000 psi
• Feature: durable and dependable for vital needs.

Gauge Cock Pressure Gauge Cocks are used for controlling flow for basic on and off, isolation applications.  It acts as a Shut-off device for pressure measuring instruments, for measurement of liquids, gases and vapours Features Available in 2 way , 3way type Forged Body Construction and Bar Stock Construction . We sell in both variants . Material SS316 or SS304 or Brass , Exotic Materials like Monel,Inconel ,Super Duplex available on request NPT ,BSP ( G ) , BSPT ( R) , Metric Threads available Connection Type: MXF, FxF, MXM in all the above mentioned threads Suitable for pressure upto 30 kg/cm2 / 30 Bar / 750 psi Suitable for gases, vapours and fluids from -10°C to +50°C Highly corrosion and chemical resistant in stainless steel design Ordering Criteria Size Option of 1/4" ,3/8" ,1/2" Threads of NPT ,BSP ( G ) , BSPT ( R) , Metric 2 Way or 3 Way Material SS316 or SS304 or Brass , Exotic Materials like Monel,Inconel ,Super Duplex

• Brand Name: FAV (TM)

We offer pulsation dampner, snubber. pulsation dampeners are designed to protect pressure instruments from sudden pressure changes and fluctuations of pressuring fluids. Thus sudden pressure changes are damped before they reach the pressure sensing element to minimize stress on it and giving longer life.

Dial Size, 1-12” (40mm), 2” (50mm), 2-12” (63mm), 4” (100mm), 6” (150mm), 8” (200mm), 10” (250mm), Accuracy, Ranges Scales All Std. Ranges from upto 1000barkgcm2 or 15000psi, Vacumm & Compound Ranges Std. Scales: psikgcm2, kgcm2, bar Case & Ring, SS304 Case and Ring IP65 - 63mm, 100mm, 150mm, SS304 Case and Ring - 40mm, 50mm, 200mm, 250mm, Socket (Block) SS316, Bourdon Tube, Material: SS316, ‘C’ Shaped Tube upto 70 Bar, Coil Shaped Tube Above 70 Bar

The adjustable pressure gauge snubber drawa unique taper. pin Orifice design for high range of damaging. The damping can be adjusted the fluid and the pulsation.

Syphon (Pig type, Ring type, U type) Gauge cock (2 way, 3 way), Snubber (Dampener), Gauge saver, Bleeder plug, Pressure gauge adaptors and reducers are available in SS 316304.

• Type: Gauge Block Set
• Color: Black
• Condition: New
• Feature: High accuracy,Strong design,Reliable performance

• SS: AS PER REQ

Offering stainless steel 316lvm w.nr 1.4441 uns s31673 aws 163 applicable standards: bs 7252 pt1 composition d astm f138 contact us..product range regarded as 'medical grade', this stainless steel 316 is vacuum melted to achieve the extremely high levels of purity and 'cleanliness' required for surgical implants. It has excellent resistance in physiological environments, to general and intergranular corrosion, to pitting and crevice corrosion.in form wire, round, tube, strips, applications include: medical implants high precision electronics

• Thread Size: : 3/8" or 1/2" BSP or NPT

Gauge Savers are used to protect the pressure gauge from over pressure. The gauge saver has a predefined setpoint at which it will not allow any media to flow. The setpoint can be varied for a max span of 10% of set pressure. Available for set pressure ranges from 1000mmwc (0.1 kgcm2) upto 600kgcm2.

• Material: Carbide
• Shape: Rectangle
• Model Name/Number: AEROSPACE 83 PCS GAUGE BLOCK SET
• Usage: For Inspection
• Range: Up to 1000mm

Applications   Gauge Cocks are used for flow control like simple on/off, isolation applications. Suitable for pressure upto 30 kg/cm2.   Features   4 Available in 2 way / 3way type 4 Material SS316 or SS304 or Brass 4 3/8”, ½” bsp or npt connection  

The adjustable pressure gauge snubber drawa unique taper. pin Orifice design for high range of damaging. The damping can be adjusted the fluid and the pulsation. Test Pressure :- 25 deg Room temperature. Pneumatic :- Body - 420 kg cm2 Gland Seal :- Buna "N", VITON , PTFE Material :- A105, A276 SS304, A276 SS316

• Material: Mild Steel
• Dimension/Size: 1/2-3 Inch
• Nominal Pressure: 1-15 Bar
• Temperature: 20-60 Degre Celsius
• Head Shape: Hex

• Gauge Adaptor: Gauge Adaptor
• Length: 1/8" 1/4" 5/16" 3/8" 1/2"

We are leading supplier of huge range of Snubber.

Pressure gauge repairs have shown in many cases of measuring very high (over) pressure behaviour. Not only is the normal operational pressure exceeded but it goes beyond the measuring scope of the pressure gauge. Costs for extension of the overburdened gauge, making of new gauge and repairs of the damaged instruments are the consequence of all this. The over pressure protection device is a reliable armature for avoiding such kinds of damages.

• Material: Steel
• Brand Name: Mitutoyo
• Features: Varied lengths, Economical, Non corrosive, Durable

• Material: Stainless Steel
• Pressure: 200 Psi
• Country of Origin: Made in India
• Packaging Type: Box
• Size/Dimension: 3/4 inch
• Grade: 304
• Surface Finishing: Polished
• Usage/Application: Bathroom Fitting