Pressure Reducing Valve Dealers in Santacruz, Mumbai

• Features: Longer functional life, Least maintenance, Rigid construction

• Material: Cast Iron
• Brand Name: Spirax
• Power: Pneumatic
• Automatic Grade: Manual

• Material: Stainless steel
• Sizes: 15NB to 300 NB. Standardised orifice. Angle/Straight Patterns. Inverted-Bottom spring mounted types.
• Models: Full Life, 'Pop' type, Full Nozzle. Screwed/Flanged Models.

These valves are for controlling downstream pressure to adjust set point. the valve closes when downstream pressure rises. Sizes:DN 15 TO 100   MOC:Body made of either CI ( A126 B), Cast Steel ( A216 GR WCB )Stainless Steel, CF8M Actuator with EPDM a351, cf8m actuator with epdm rolling diaphragm. All wetted parts are free of non-ferrous metal   Springs:For three reduced pressure 5/60, 20/80, 40/125

water pressure reducing valves, Manhole Covers, Hammer, Carpentry Tools

• Material: Cast Iron
• Valve Size: 40mm
• Media: Water, Gas
• Brand Name: Spirax

The PRV valve protects domestic, commercial and industrial applications against excessive water supply pressure. It reduces both water consumption and noise from water hammer, while minimising over pressure damage. The set outlet pressure can be maintained even when there are wide inlet pressure fluctuations. A drop tight seal means outlet water pressure will not increase when there is no flow. It has been awarded the Waterwise Marque.   Features:   Outlet pressure set by turning the adjustment knob Set pressure directly indicated on the set point scale Adjustment spring not in contact with wholesome water Valve insert is of high quality synthetic material and can be fully exchanged Integral fine filter (160 microns) Available without fittings Light weight Reliable and proven Drop tight max. 16 bar with clear filter bowl or max. 25 bar with brass filter bowl inlet pressure 1.5 - 6 bar outlet pressure Available with pressure gauge   Options:   1/2" and 3/4" Female BSP connections 15mm and 22mm connections  

We Are The Manufacturer And Supplier Of Pressure Reducing Valves Which Have The Following Types:Teleflo Pressure Regulators Single Stage & Two Stage Regulators, Teleflo Back Pressure Controller, Teleflo Diaphragm Piston & Pilot Type Pressure Reducing Valves For Air, Gas, Water And Liquid Service, Including Pilot Type And Back Pressure Regulators.Our pressure reducing valves can be most commonly used in relay operated systems. But however for several applications SDF-operated control system is sufficient. Our specially designed pressure regulators are known as pressure regulating valves. Control valves that do not use auxiliary power source such as air and electricity are called as regulating valves. Our innovative designed pressure valves directly receive power from the control system through pressure detecting means to actuate the valve.Key features of our high quality pressure reducing valves are Pretty Cost effective because of high efficiency Simple and design makes them easy to install. Requires very low maintenance. They are direct acting types valves which serve as the actuating means for operating the valve plugs. These valves can be custom designed as per specific requirements. We have designed 4 different types of pressure regulators with varied pressure ranges. Installing these superior quality valves makes it Secondary Pressure Regulators Installation of this valve makes it possible to regulate the fluid pressure at a constant value on the outlet side of the valve, irrespective of fluctuation in load. Set pressure is designed within a range of 10 to 1.0 Kg f/cm²g. Differential Pressure RegulatorsInstallation of this valve makes it possible to regulate the pressure differential between the outlet (or the inlet) side of this valve and the line pressure of a different system at a constant value, irrespective of fluctuation in load. Set pressure is designed within range of 7 to 0 Kg f/cm²g. Pilot Operated Type Secondary Pressure Regulators Installation of this valve makes it possible to regulate the fluid pressure at a constant value on the outlet side of the valve, irrespective of fluctuation in load. Set pressure varies for each model, but it is designed within a range of from 22 to 0.5 Kg f/cm2.possible to regulate the fluid pressure at an constant value. This is done on the inlet side of the valve, irrespective of fluctuation in load.

Pressure Reducing Valves, Y Basket Strainers, Forged steel valves