Pressure Seal Valve Dealers in Mumbai

Pressure Sealed DesignSolid, Flexible or Split Wedge DesignBack-seating, Renewable Seat RingFull Port Or Reduced Bore. Size: 2″ - 32″NB. Materials: WCB,LCB,CF8,CF8M,CF3,CF3M,WC6,WC9, C5,C12 or Equivalent, Available also in low temperature steels,low alloy steels, stainless steels, duplex type stainless steels and other exotic materials; Various trim materi--als available to suit service conditions. 

• Valve Size: 2 to 24 inch
• Material: Cast Steel
• Certification: ISO 9001:2008 Certified
• Country of Origin: India
• Temperature Pressure: High Temperature Pressure
• Type: Globe Valve
• Automatic Grade: Manual
• Warranty: 1 Year

Authorized Wholesale Dealer of KSB VALVE - Ksb Pressure Seal Gate Valve, KSB High Pressure Gate Valve, Ksb Valves and KSB Globe Valve offered by flowtech valves()

• Country of Origin: India
• Material: Carbon Steeel, Stainless Steel
• Certification: ISI Certified
• Application: Industrial
• Color: Red, Silver
• Brand Name: HAMA
• Size: #900 / #1500 / #2500
• Type: Flange End
• Pressure: High Pressure

Design Standard :   ASME B 16.34 Testing Standard :   ASME B 16.34Operating Pressure :   Up To 439 bar ( 6250 PSI )Operating Temperature :   Up To +593º C / 1100º F Pressure Temperature Rating :   ASME B 16.34 Face To Face :   ASME B 16.10 Short Pattern For Butt-weld End ASME B 16.10 LONG Pattern for Flanged EndFlanged End :   ASME B 16.5Butt Weld End :   ASME B 16.25  Material :   WCB, LCB, WC6, WC9, C5, C12, CF8M & Others. General Application :   High Pressure and High Temperature applications like Steam, Oil and Gas Processing, Chemical and PetrochemicalIndustry and in the Power Industry.    

• Country of Origin: India
• Suitable For: Water

Material: Cast Steel Temperature of Media: High Temperature, Low Temperature, Normal Temperature, Medium Temperature Condition: New Driving mode: Manual End: Flanged End, Screwed Ends Media: Air, Water, Gas Rust Resistant: Yes Automation Grade: Manual Is It ISO Certified: ISO Certified Body Material: Alloy Steel Power: Manual

We offer the Pressure Seal Swing Check Valve Threaded or welded seat ring. The swing disc type Pressure Seal Swing Check Valve is made from optimum quality materials. Quality tests are carried out to ensure only the best Pressure Seal Swing Check Valves are dispatched in the market. ComponentsBack up ring: Absorbs thrust applied by internal pressure.Thrust ring: Protects the soft metallic gasket from detonationGasket Unique angular design provides superior sealingAvailable StandardsPressure Seal Swing Check Valve ASTM A216 WCB, A217 Wc6, A351 Cf8, A351 CF8M, A351 Cf3, A351 CF3M, A351 CN7MStandards ComplianceDesign and Manufacture : ANSI B16.34, API 6D, BS1868Face to face(end to end) : ANSIB16.10, API 6DFlanged connection : 2"~24" to ANSI B16.5Butt welded end : ANSI B16.25Test and inspection : API 598, API 6DBack up ring: Absorbs thrust applied by internal pressure.Thrust ring: Pretects the soft metallic gasket from detemation.Gasket Unique angutar design provides superior sealing

• Design: API 600/ ASME B 16.34
• Face to Face: ASME B 16.10
• Flanges: ASME B 16.5
• Butt welding: ASME B 16.25
• Testing: API 598 / EN 12266 PART 1 & 2

Neelcon Steel offer a wide selection of Pressure Seal Valves Stockist Mumbai (Maharashtra) India. Neelcon Steel Wholesale Various High Quality Pressure Seal Valves in all shapes and sizes and with any specifications that the clients, More then 1500 Clients in India, United States, Canada, United Kingdom, United Arab Emirates, Iran, Singapore, Saudi Arabia, South Korea, Indonesia, Malaysia, Italy, Thailand, Germany, Australia, Mexico, Taiwan, Turkey, Pakistan, Spain, France, Brazil, Vietnam, Netherlands, Japan, Philippines, Kuwait, Poland, Qatar, Oman, Egypt, Colombia, Argentina, Nigeria, Finland, Ireland, South Africa, Russia, Bangladesh, Israel, Hong Kong, Chile, Algeria, Romania

Sanghvi Overseas is one of India’s leading manufacturers of high quality Pressure Seal Valves which find application across diverse sectors. We offer a complete range of Pressure Seal valves for all of your high pressure and high temperature applications, proven over years of service in conventional thermal and nuclear power plants as well as other HP steam services around the world. These are also preferred in high pressure, high temperature hydrocarbon or petrochemical processing services. The non-rotating stem result in lower friction of all moving parts and longer stem packing life. Well, all this resulting in smooth, easy operation and tight shutoff under extreme pressures. Our products can be offered in made to order length sizes and shapes, and are available at market leading prices.

Bonetti’s bellows seal valves are zero emission and maintenance free. The valves are particularly suitable for dangerous, inflammable, lethal and explosive media: an uninterrupted metallic barrier is positioned between the piping and the environment. Hence these valves are suitable for any fluid and are recommended when zero emission characteristics are required to protect the environment and the health of the workers from pollutive leaks, to prevent expensive wastes due to loss of energy and fluid, and to eliminate the not negligible cost of replacement of the packing.

Stelcom Cryogenic valves, except check valves are supplied with extended bonnet with a sufficient gas column length. Usually supplied by the user, to eliminate any chance of frosting of the packing area.The cryogenic valves are installed on applications involving the production, transport and storage of liquefied gases such as oxygen, nitrogen, argon, natural gas, hydrogen or helium down to -254ºC.The cryogenic valves are designed with compliance of ASME B16.34 and BS 6364. The cryogenic tests are performed in fully equipped in-house facilities, according to BS 6364.

Gate valves are primarily used for stop valves fully opened or fully closed. They are not normally considered for throttling purposes, but more for slurries, viscous fluids, etc. Gate valves are characterized by a traveling wedge, which is moved with the operation of the stem nut. The wedge travels perpendicular to the direction of the flow. Gate valves usually have a minimum pressure drop when fully open, provide tight shut-off when fully closed, and remain relatively free of contamination buildup.   BODY & BONNET The design of the body and bonnet is calculated to achieve the most regular distribution of stress in all directions, as well as the minimum turbulence and resistance to flow. Valve bonnets are equipped with a backseat bushing. The yoke is integrally cast on Pressure Classes 150 and 300 up to 12” and up to 10” on Class 600 and higher ratings.   BODY-BONNET JOINTStandard body-bonnet joints of gate valves are machinedas follows:PRESSURE CLASS JOINT DESIGN150 Flat Faced300, 600 Male-and-Female900* & over Ring Type Joint*Pressure Class 600 also available in Ring Type Joint.EMFLO  can supply any style of gasket required by customer.   GATE All gates are fully guided to the seats. As standard our valves are supplied with a solid flexible gate that has a tapered H cross-section. The flexible wedge is cast or machined with a circumferential groove to allow the seating surfaces to move independently and adjust to movement of the body seats. This design is beneficial where line loads or thermal expansion of the system is likely to distort the seat face in the valve. This design of gate is ideally suited for steam or other high temperature services and is especially useful to prevent sticking where valves are closed when hot and opened when cold.   SEAT RING Seat rings are designed to greatly reduce and/or prevent any turbulence and avoid damages due to the corrosion. The seat rings are forged or rolled in one piece, and then seal welded and overlaid, if required. After welding and all required heat treating, the seat ring faces are machined, thoroughly cleaned and inspected before leaving for assembly.   STEM The stem connection to the gate is a T-head design which is integral (without welding) with the stem. The accuracy in the dimensions and finishes assure a long life with a perfect tightness in the packing area, resulting in lower fugitive emissions. The stem-to-gate connection is designed to prevent the turning or the disengagement of stem from the wedge while the valve is in service. Through calculations and extreme testing, the strength of the stem-to-gate connection has proven to exceed the strength of the stem at the root of its operating thread.   STEM PACKING The stem packing is designed and arranged to ensure a maximum seal along the stem during operation or while at position, thus allowing for a greater reduction in fugitive emissions. Our packings are NON-ASBESTOS types. EMFLO can supply any style of packing required by our customer.   STUFFING BOX The depth of the stuffing box allows for a sufficient amount of packing, which makes the stem seal. Our standard packing arrangement and stuffing box design meets

Pressure Seal Check Valve, Stainless Steel Gate Valve, Wafer Butterfly Valve

Pressure Seal Valves, Needle, Knife Gate Valves, Diaphragm Valves

Pressure Seal Gate Valve, Uni Klinger Ukl Piston Valve, Audco CI Plug Valve

We are offering pressure seal valves. Outside screw and yoke construction flanged end or buttwelding end valves provided with back seating arrangement solid, flexible, split wedge, double disc and parallel slide are available. Extended bonnet provided for low temperature and cryogenic services (cold box and non-cold box applications) to conform to requirement of bs 6364. Specially designed die formed graphite packings, controlled clearances between stem, gland and bonnet bushing for guaranteed low emissions meet 100 ppm maximum fugitive emission levels. Renewable, seal welded seat ring or integral seat ring (cast s.s. Only) available. Deep stuffing box - with lantern ring optional self aligning two piece gland anti-friction ball thrust bearings in yoke sleeve for higher sizes and classes locking arrangement optional bi-directional shut off

Pressure Seal Valve, Api Gate Valve, AUDCO VALVES, Check Valves

Pressure Seal Valve, prv valves, vacuum relief valve, erv check valves

Pressure Seal Valves, Industrial Hardware, Alloy Steel Plates for Aerospace

Pressure Seal Gate Valve with Actuators, C S Ball Valve Scrwd, Socketweld WCB

Pressure Sealed Globe Valve, Lug Type Butterfly Valve

L&T Pressure-Seal Valves, Swing Check Valves

Pressure Seal Valves, Phosphor Bronze Hollow Pipe, stainless steel beams