Pressure Switches Dealers in Kurla, Mumbai

• Product Applications: Air Conditioner Systems,Clean Rooms,Fume Exhaust Systems

Photohelic® SwitchGages function as versatile, highly repeatable pressure switches combined with a precise pressure gage employing the time-proven Magnehelic® gage design. The Photohelic® switchgage measures and controls positive, negative or differential pressures of air and compatible gases. Standard models are rated to 25 psig (1.7 bar) with options to 35 (2.4) or 80 (5.5 bar) psig. Single pressure 36000S models measure to 6000 psig (413 bar) with a 9000 psig (620 bar) rating. Two phototransistor actuated, DPDT relays are included for lowhigh limit control. Easy to adjust set point indicators are controlled by knobs located on the gage face. Individual set point deadband is one pointer width - less than 1% of full scale. Set points can be interlocked to provide variable deadband - ideal for control of fans, dampers, etc. Gage reading is continuous and unaffected by switch operation, even during loss of electrical power. Choose from full scale pressure ranges from a low 0-.25" (0-6 mm) w.c. up to 30 psi (21 bar); single positive pressure to 6000 psig (413 bar). Photohelic Sensing - How It Works In typical applications, these Dwyer switchgages control between high and low pressure set points. When pressure changes, reaching either set point pressure, the infrared light to the limiting phototransistor is cut off by the helix-driven light shutter. The resulting phototransistor signal is electronically amplified to actuate its DPDT slave relay and switching occurs. Dead band between make and break is 1% of full scale or less - just enough to assure positive, chatter-free operation. Relay-Transformer Features A plastic housing protects all electronic components. Solid-state and integrated circuit electronics are on glass-epoxy printed circuit boards and self-extinguishing terminal boards.

• Media Type: Liquid
• Set point range: 2.5 to 75 psi
• Differential pressure: 1.0 to 67 psi
• Product type: Differential Pressure Switch
• Packaging type: Box

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers.

We are bracketed among the trusted Suppliers of Industrial Pressure Transducers. The Pressure Transducers offered by us with reverse polarity protection on input and short circuit protection on output. Our range of Transducers is extensively used in refrigeration systems, automotive test stands, agricultural equipment, etc. Buyers can obtain it competitive rates from us.

• Media Type: Gas
• Material: Polycarbonate
• Adjustment Ranges: 0.3 - 60 Bar
• Over Pressures: Up to 80 - 300 Bar
• Max Working Pressures: 40 - 150 Bar

• Features: Smooth edges, Precised dimensions, Fine finish
• Item Code: YukenDIN43650

• Color: Red
• Usage/Application: Water Flow Detection
• Model Name/Number: WFS-6000
• Brand: Honeywell
• Flow Rate: 110 LPM MAX
• Operating Pressure: 10kgf/cm2 (91750KPa)
• I Deal In: New Only

We Are The Manufacturer And Supplier of Flow Switches Which Have the Following Types: Teleflo Target or Paddle And Plunger Type Flow Switches With Adjustable Settings. We offer our clients a comprehensive range of Flow Switches that is manufactured from finest quality raw material in compliance with set industry standards. Widely appreciated for its unmatched quality and performance, this range is offered in:. • Plunger-Flapper-Paddle-Diaphragm types • Magnetic Glandless switching • Micro switch, mercury and air break type • Flanged, screwed connections • Ideal for alarms, tank overflow and motor control • Special design for vertical / horizontal flow • Level switch - nine types for every application • Internal, external, side and top mounted •Micro switch - mercury, air break and air N\valves • Operating alarms • Motor control, level control with snap action contacts with NO/NC controls •Float operated Magnetic and Glandless

We are offering Pressure Transducers.

Pressure switches and sensors A wide range of analogue pressure switches and electronic pressure sensors is available suitable for pressures between 0 and 600 bar.  

• Feature: High Quality, Low-Cost and Visual Set Point Indication

The Series 104 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 2A @ 250V and can be set as low as 0.08” w.c. (20 Pa)

SIGMA's Flow Switch is an extension of the level switches. There are two types of flow switches : one for low flow / line size up to 50 mm line size (Model FS 1000) and another from 25 mm onwards up to 800 mm or above (Model FS 1010).Operating Principle :Model FS 1000 is a valve type Flow Switch wherein an increase in flow through the body raises the valve disc depending upon the flow. This in turn raises the magnetic sleeve moving inside a non-magnetic enclosure. The movement of the sleeve attracts the magnet located outside the tube which in turn actuates a micro switch. Decrease in flow reverses the action.Model FS 1010 is a target type which moves from a vertical position to a near horizontal position as the flow increases. This change in position moves a magnetic sleeve in a non-magnetic enclosure. The movement of the magnetic sleeve attracts a magnet which in turn actuates a micro switch. Decrease in flow brings the target back to the vertical position.

Low-Cost Differential Pressure Switch High Quality, Low-Cost Visual Set Point Indication Hassle-Free Field Adjustment Knob 2% Repeatability The Series 104 Differential Pressure Switch is a low-cost easy to use switch for very low pressure applications. The switch can monitor positive, negative, or differential pressure and with an easy to adjust set point knob makes field set up and adjustment hassle free. The differential pressure switch includes a SPDT relay rated for 2A @ 250V and can be set as low as 0.08” w.c. (20 Pa)

M3 Melt Pressure Transducer, 1 Position Magnetic Latching Solenoid

Offers pressure switch.

Disposable Pressure Transducer, Transducer Protector, Conductivity Sensor

Flow Switches, Flame Detector, portable gas detectors

Pressure Switches, temperature switches, Solenoid Valve, Pneumatic Cylinders

Measurement Of Pressure Using Pressure Transducer

Digitally Compensated Pressure Transducer, Ultrasonic Level Sensor