Pressure Valve Dealers in Andheri East, Mumbai

Application: Single or double-acting cylinders. Permits adjusting operating pressures at various values below relief valve setting of pump. Operation: Regulator valve is easily adjusted to maintain pressures between 300 and 10,000 psi. Maintains a given pressure setting within 3% over repeated cycles. Flow range is 17 cu. in./minute to 6 gpm. Simply turn the handle clockwise to increase the pressure setting, counter-clockwise to reduce pressure. NOTE: 3' Drain Line Kit is Included.

We are offering pressure regulating valve. Miniature series | service : air water sizes: 3 mm & 6 mm (g 18" & g14") flow: up to 22 scfm @ 7 kg cm2g regulator compact design high performance

Brassomatic Pressure Relief Valves have been designed for installation on pressure vessels containing gas and to provide positive instantaneous action with high volume discharge. All valves reach full volume within 10% of the setting. They are available with standard setting ranging from 100 psi to 650 psi. These valves are also available with special settings. The body is manufactured out of special brass with highly sensitive spring set at the desired pressure and sealed.   Size Available: ¼” to 1”

• Brand Name: New Engineering
• Usage: Industrial
• Valve Size: Variable
• Material: Aluminium, Brass/Bronze, Stainless Steel
• Pressure: High Pressure
• Media: Water, Powder/Solids, Air

Amarama Engineers designs & manufactures spring loaded Pressure Safety Relief Valves which are installed to release the excess pressure developed in a system like reactor vessels, pipelines due to a chemical reaction, thermal expansion etc. Our full bore inlet design gives quick release of pressure and faster shut off on the return. Through our years of experience we have categorised our range of springs for different pressure and sizes of valves. The flexibility in our design helps us cater to different applications like corrosive vessels, utility, high pressure, temperature, hydrogenation, reactor jacket, bitumen blending & many more applications. For example, for corrosive we provide PTFE lined inlet nozzle and Hastelloy �C� plug, which ensures leakage class 6. We also assist our customers with the sizing and selection of Pressure Safety Relief Valves according to API 521.

We supply Pressure Relief Valves to our clients which are well in demand and have important application in various fields. It is a kind of safety device that relieves overpressure in a vessel or piping. We have a comprehensive range of these Pressure Relief Valves that are available at reasonable prices and are timely delivered to our clients. Applications : To relieve pressures through pipes, hosing, tubes or entire system

We Present to Customers a Superior Range of Pressure Relief Valves. Pressure Relief Valves are Used as a Safety Device to Avoid Harm or Damages Caused to Equipment, Piping and Its Allied Components Caused By Sudden Increase in Excessive Pressure. These Pressure Relief Valves are Fitted At the Discharge Line. the Pressure Relief Valves are An Adjustable Spring Loaded Valve. the Valve is Factory Adjusted for Set Pressure as Specified Originally or At 15 % Above the Rated Pump Pressure. Depending On Pipe Line Size and Flow Rates and Set Pressure, the Inlet and Outlet Sizes of the Pressure Relief Valves are Designed. features excellent Quality Adjustable Spring Loaded Efficient Working Wide Range applications prevent Equipment Damageas Safety Measures Control and Limit Pressure.

• Material: Mild Steel
• Surface Finish: Zinc Plated
• High Frequency: 50 Hz
• Type: Pneumatic
• Packaging Type: Box
• Tensile Strength: 400 Mpa

Auto Re-circulation on a Refueller to control the pumping pressure of Air Crafts. Solenoid Override or Pneumatic Override to safeguard the system. This can be operated remotely to re-circulate full flow. When installed in Main line, it prevents upstream pressure dropping below preset value. When installed on a By-Pass line, it controls main line pressure by relieving excess pressure in By-Pass/sump. Ideal for pump by pass to protect the downstream equipments Relief pilot (PR-610) is normally closed due to spring tension. With increase in upstream pressure above set value, Pilot (PR-610) opens which makes Main Valve to open fully. Spring Range: Standard: 20-200 psig. Optional: 5-30 psig. Size : 25NB - 400NB

• Hydraulic oil, Water, Steam, Gas, Chemicals.: CS zinc plated and dichromated/Stainless steel/Brass in natural finish

We have wide range of square body ball valves in Carbon steel, Stainless Steel and Brass. Sizes from ¼” to 2” are available ex-stock with us. Large sizes can be custom made as per your needs. Pressure ranges from 1,000 PSI to 10,000 PSI. Our range includes 2-way, 3-way and 4-ways designs. Our Ball valves are available in a variety of end connections and also include flange end connections from 1.5” and above which conform to SAE and CETOP standards. Standard valves come with Buna or Viton seal but we can offer Teflon seals as well.

pressure vacuum relief valves, emergency relief valves, flame arresters

Valve consists of a body and shut off mechanism inside the body. Body has through axial holes of different diameters over the length. Lower part the hole is 8 mm in dia, the remaining part is of 22 mmin dia. (MOC – SS). The upper part of the body is provided with female thread for securing stem assembly and male thread for fastening the valveon the bottle. From one side and under the body there is a connection with male threads for attaching to the pipe lines. The shut off mechanism consist of valve assembly with a pad made of polyamide resin, stem assembly (MOC - MS), bushing (MOC – Gun Metal), gasket (MOC - Copper), spring (MOC – Case hardened steel) with packing . The stem assembly in its turn has a nut, stem, ball and pivot journal. Hand wheel assembly is fixed by nut on the square end of stem for opening and closing of the valve. The air leakage from the valve is prevented by a seal and made in movable and fixed joint. The movable joint of valve end and bushing are sealed by rubber rings. Valve assemblies have tested for the leak tightness by compressed air at a pressure of 400 kgf/cm² and hydraulic test for strength at a hydraulic pressure of 600 kgf/cm².

Application Pressure relief valves are Compatible with all CFC, HCFC and HFC Refrigerants and oils and other Industrial gases and fluids non-corrosive to steel and brass. (With suitable Gland/Seal). Construction Valve Body: Extruded Brass. Valve Cap : Forged Brass Spring: Stainless Steel Seat Material: Neoprene/Teflon. Machined parts: Extruded Brass. Design Pre compressed special grade SS Spring provides unchanged tension for life of Valve. Pre stressed virgin seat material improves accuracy of pressure ratings. Designed for quick Discharge and immediate shut down. Available in pressure Range from 150psig – 450 psig. Pre set on imported accurate pressure gauge. Working Temperature range is -30°C to 100°C. Installation. Inspect valve and Install only if factory seal appears untampered. For leak tight sealing use Torque wrenches set at 30 Lb.Ft and ensure that Female thread is exact match. Shelf life of Valve is 18 months from date of manufacture. Beyond this period if unused return valve to Factory for recalibration. We recommend replacement of the valve after it pops open. It may not open again at preset pressure on account of Debris impregnation in seat and ageing of seat material. Under no circumstances open the seal and try to reset the valve as it needs special tools and trained technicians.

We are leading supplier of huge range of High Pressure Ball Valves.

Pressure Reducing Valves protect household water installations for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.  Spring loaded pressure reducing valves operate by means of a force equalising system. The force of a diaphragm operates against the force of an adjustment spring. If the outlet pressure & therefore diaphragm force fall because water is drawn, the then greater force of the spring causes the valve to open. The outlet pressure then increases until the force between the diaphragm & the spring are equal again. The inlet pressure has no influence in either opening or closing of the valve. Because of this, inlet pressure fluctuation does not influence the outlet pressure.

• Size: 3" to 20"

PRDS used in turbine bypass applications help to protect the turbine during start-up, power trip and also for part load generation. Turbine by pass valve prevent venting of steam into atmosphere and allow the steam to be dumped into condenser, so that energy can be saved to generate high temperature Boiler Feed Water.

Water Pressure Reducing Valve

High Pressure Globe Valve, Reflux Valve, Carbon Steel Gate Valves

pressure valve, pollution control equipments, PVC Pipe, Clamps

Low Pressure Solenoid Valve, Vac Linear Actuator, Air Volume Booster

pressure valve, Fire Alarm, Fire Extinguisher Lock Pins

Pressure Gauge Valve, Back Pressure Regulator, Bottom Outlet Valve

Pressure Valves, Diaphragm Valve, Lined Valves

Fittings, Diwali Decorative Lights, decorative, Table Lamps, Wall Lights