Pressure Valve Dealers in Ghatkopar, Mumbai

• Pressure: -150 To +440 DegreeC
• Size: 1/8
• Model Number/Name: ZEAL / PGVS / 08S
• End Connection Type: Threaded
• Brand Name: ZeaL

The PRV valve protects domestic, commercial and industrial applications against excessive water supply pressure. It reduces both water consumption and noise from water hammer, while minimising over pressure damage. The set outlet pressure can be maintained even when there are wide inlet pressure fluctuations. A drop tight seal means outlet water pressure will not increase when there is no flow. It has been awarded the Waterwise Marque.   Features:   Outlet pressure set by turning the adjustment knob Set pressure directly indicated on the set point scale Adjustment spring not in contact with wholesome water Valve insert is of high quality synthetic material and can be fully exchanged Integral fine filter (160 microns) Available without fittings Light weight Reliable and proven Drop tight max. 16 bar with clear filter bowl or max. 25 bar with brass filter bowl inlet pressure 1.5 - 6 bar outlet pressure Available with pressure gauge   Options:   1/2" and 3/4" Female BSP connections 15mm and 22mm connections  

These valves are for controlling downstream pressure to adjust set point. the valve closes when downstream pressure rises. Sizes:DN 15 TO 100   MOC:Body made of either CI ( A126 B), Cast Steel ( A216 GR WCB )Stainless Steel, CF8M Actuator with EPDM a351, cf8m actuator with epdm rolling diaphragm. All wetted parts are free of non-ferrous metal   Springs:For three reduced pressure 5/60, 20/80, 40/125

We are manufacturer and supplier of hi-pressure instrumentation valve needle valve, 2,3,5 valve manifold,ball valve,thermowel, mono flange compression fitting flair fittings all hydro pneumatic accessories etc.

• Features: Longer functional life, Least maintenance, Rigid construction

high Pressure Valves, Single Shot Lubrication Pump Windsor Machine

  Nirmal has established itself as an expert in control valve solutions required for services such as manufacturing; in the field of self-actuated pressure control valves, low -pressure nitrogen blanketing systems, reduction in gas pressure with safety shut off & metering skids

Design Standard :   ASME B 16.34 Testing Standard :   ASME B 16.34Operating Pressure :   Up To 439 bar ( 6250 PSI )Operating Temperature :   Up To +593º C / 1100º F Pressure Temperature Rating :   ASME B 16.34 Face To Face :   ASME B 16.10 Short Pattern For Butt-weld End ASME B 16.10 LONG Pattern for Flanged EndFlanged End :   ASME B 16.5Butt Weld End :   ASME B 16.25  Material :   WCB, LCB, WC6, WC9, C5, C12, CF8M & Others. General Application :   High Pressure and High Temperature applications like Steam, Oil and Gas Processing, Chemical and PetrochemicalIndustry and in the Power Industry.    

Flow and pressure control valves provide flexible options for controlling your hydraulic system. Enerpac hydraulic valves are designed and manufactured for safe operation up to 10,000 psi.

We are offering high pressure valve. Ukl high pressure gate and globe valves are manufactured to the latest international designs, using latest, state of the art technology and a strict quality control system. These valves are exceptionally sturdy, rugged and durable. They are designed for a tight seal, ease of operation with inbuilt quality and integrity for a long service life ukl high pressure valves are manufactured in gate as well as globe valve types.

high Pressure Valves, Gauge Isolator Valves, Relief Valves

Flow and pressure control valves provide flexible options for controlling your hydraulic system. Enerpac hydraulic valves are designed and manufactured for safe operation up to 10,000 psi.  

• Material: Cast Iron
• Brand Name: Spirax
• Power: Pneumatic
• Automatic Grade: Manual

• Material: Stainless steel
• Sizes: 15NB to 300 NB. Standardised orifice. Angle/Straight Patterns. Inverted-Bottom spring mounted types.
• Models: Full Life, 'Pop' type, Full Nozzle. Screwed/Flanged Models.

• Material: Cast Iron
• Valve Size: 40mm
• Media: Water, Gas
• Brand Name: Spirax

We Are The Manufacturer And Supplier Of Pressure Reducing Valves Which Have The Following Types:Teleflo Pressure Regulators Single Stage & Two Stage Regulators, Teleflo Back Pressure Controller, Teleflo Diaphragm Piston & Pilot Type Pressure Reducing Valves For Air, Gas, Water And Liquid Service, Including Pilot Type And Back Pressure Regulators.Our pressure reducing valves can be most commonly used in relay operated systems. But however for several applications SDF-operated control system is sufficient. Our specially designed pressure regulators are known as pressure regulating valves. Control valves that do not use auxiliary power source such as air and electricity are called as regulating valves. Our innovative designed pressure valves directly receive power from the control system through pressure detecting means to actuate the valve.Key features of our high quality pressure reducing valves are Pretty Cost effective because of high efficiency Simple and design makes them easy to install. Requires very low maintenance. They are direct acting types valves which serve as the actuating means for operating the valve plugs. These valves can be custom designed as per specific requirements. We have designed 4 different types of pressure regulators with varied pressure ranges. Installing these superior quality valves makes it Secondary Pressure Regulators Installation of this valve makes it possible to regulate the fluid pressure at a constant value on the outlet side of the valve, irrespective of fluctuation in load. Set pressure is designed within a range of 10 to 1.0 Kg f/cm²g. Differential Pressure RegulatorsInstallation of this valve makes it possible to regulate the pressure differential between the outlet (or the inlet) side of this valve and the line pressure of a different system at a constant value, irrespective of fluctuation in load. Set pressure is designed within range of 7 to 0 Kg f/cm²g. Pilot Operated Type Secondary Pressure Regulators Installation of this valve makes it possible to regulate the fluid pressure at a constant value on the outlet side of the valve, irrespective of fluctuation in load. Set pressure varies for each model, but it is designed within a range of from 22 to 0.5 Kg f/cm2.possible to regulate the fluid pressure at an constant value. This is done on the inlet side of the valve, irrespective of fluctuation in load.

water pressure reducing valves, Manhole Covers, Hammer, Carpentry Tools

Pressure Seal Gate Valve with Actuators, C S Ball Valve Scrwd, Socketweld WCB

The Model 730 relieves over pressure caused by excessive pump discharge during low demand. To keep a constant discharge pressure, the difference between pumped flow and consumer demand can be circulated back to pump suction.

downstream pressure control valves, Heating Skids

Pressure Seal Valves, Plug Valves, Needle, Knife Gate Valves

Pressure Relief Valve, Gate Valve, Safety Valve

self actuated pressure control valves, Pressure Regulators

SS Pressure Reducing Valves, Y Basket Strainers, Forged steel valves

Fittings, Asian Paints, Sanitary Ware, G I Pipes, Flush Tank, PVC Tanks

Pressure Control Valves, Gas Regulators, Solenoid Valves

Fittings, repairing, maintenance, pneumatic products solenoid valves

Pressure Relief Valves, Industrial Valve

Fittings, Flat Sheet, fiber sheet, ceramic product granite, asbestos sheet