Pressure Vessels Dealers in Bhandup East, Mumbai

• Type: Jacketed Vessel
• Condition: New
• Country of Origin: India
• Brand Name: nsgi

We make available Narayani Jacketed Vessel at most affordable prices. With the assistance of our secure payment procedures including both Online and Offline Payment Processing, we are able to ensure safety of the payments with us. Only high quality raw materials have been used for the production of our entire range. We check the raw materials against varied quality parameters before procurement.

Fixed Bed Reactor/ Packed Bed Reactor / Fluidized Bed Reactor Multi-phase reactor systems are widely used in fine chemicals, oil and gas,petrochemical refineries, pharmaceutical, pesticides and in research centers.With the evolving needs of the industry for enhanced productivity and lowercost of production; Amar offers tubular reactor systems in continuous manner for various applications with system integration and automation which maximizes the efficiency and accuracy of research and production operations Salient Features Fixed Bed Reactor volume from 5cc to 100 ltrs. Higher volumes optional Designed up to 350 bar & 1000 °C. Higher ratings optional Various MOCs such as SS316, Inconel, Hastelloy etc. Explosion proof plants for highly explosive reactions/hazardous area Table top or skid mounted plants Either a standard or customisable unit can be offered for gas liquid feed combinations, product outlets, series or parallel reactors, multi zone heatingfurnaces etc. with integrated controls, high level of safety, automation andSCADA software Fixed bed reactor, fluidized bed reactor, trickle bed reactor designs offered Applications & system of packed bed reactor Catalyst testing, oxidation, reforming, hydrogenation, dehydrogenation,liquefaction, fischer Tropsch process, hydro-cracking, carboxylation, catalystscreening, fluid catalytic cracking (FCC), microreactor system, syngas reactorsystem, pyrolysis reactor system, packed bed reactor system, vapor rig system,biomass gasification system, hydroprocessing catalyst testing system, catalystreduction unit, multi-purpose reactor unit, vapor phase reaction system etc Table Top Reactor System (TTRS) The table top reactor system is very compact & complete semi or fully automated system for vapor phase catalyst evaluation and continuous flow process analysis.The reactor and feed lines are mounted within an isothermal oven. System Specifications: Reactor volume: 5-50 ml System pressure: Upto 200 bar Temperature rating (reactor): Upto 650 °C Temperature rating (oven): Upto 200 °C Description: Feeding section: Feed streams are provided for 4 reactants (2 liquids, 2 gases), the purge gas and the GC carrier gas. Feed lines includes bulk head union connectors, inline filters, metering valve, 3- way ball valve and check valve. Reactor section inside oven: Preheater & vaporizer: This section includes 2 coils for preheating gases and 2 coils for vaporizing liquids. Reactor: volume available from 5 – 50 ml. Reactor status valve: The optional multiport reactor status valve can permit reactor bypass. Sample valve: Sampling valve can be provided for transfer of sample of product to GC unit. Back pressure regulator: Manually operated (standard) with optional automatic control. Product collection section: Gas liquid separator: Volumes upto 250 ml will be placed after reactor and before back pressure regulator. Heated transfer line: It connects the sample valve to the gas chromatograph unit (supplied by client).

Precisely designed in adherence with all defined industry standards of quality, we offer long service life Pressure Vessel. Known for their high pressure bearing capacity, we Manufacture, Export and Supply pressure vessels for air and gas systems. Our quality team makes sure that Pressure Vessel has robust structure and anti-corrosive nature. With our wide distribution network we make sure that all orders are delivered in the stipulated time frame. For competitive prices, contact us.

These are current limiting reactors except that such reactors provide low reactance under normal conditions and a high reactance under fault conditions. The reactor consists of two halves, wound in opposite direction to serve the above application.

• Material: MS
• Capacity: 500 L
• Tank Orientation: Vertical
• Storage Capacity: 500 Litres
• Max Design Pressure: 1-10 Bar

• Condition: New
• Warranty: 1 Years
• Material: Stainless Steel

Our procedures of payment are practical, appropriate, and clear. We utilize secure online and offline payment methods for our safety as well as of patrons. We make sure the payment is done with proper documentation. Utilizing state-of-the-art packaging tools and superior grade supplies, we pack our products and help them remain protected from external damages. Furthermore, the packages are labeled properly for information.

The Photochemical Reactor with Teflon Ring, delivered by us has robust make which makes them durable. In order to deliver the orders on time, we have backed ourselves with advanced logistics facilities. We are Mumbai(India) based organization, involved in providing high quality array of products at competitively low prices.

• Material: Stainless Steel
• Capacity: 500 L
• Max Design Pressure: 1-10 Bar

The air charge is contained within the tank, whilst the liquid from the main flows into and out of the bladder. Like the air in bladder design, the liquid does not come into contact with the tank walls nor the air charge, so again, the air charge cannot be absorbed by the pumped liquid and so air losses due to absorption are minimal. The pumped liquid from the main flows into and out of the bladder and will not come into contact with the tank walls, again compatible materials must be selected. As for the air in bladder design, the bladder is often made from a highly elastic rubber, such as butyl rubber, and may be sized to expand to fit the entire vessel. For this design the whole tank is pre-charged at installation with a pre-determined pressure to give the correct operating level in the tank when the unit is connected to the main and at the operating pressure. Again, there must be an anti extrusion plate fixed at the outlet from the vessel to prevent the bladder from being drawn into the main at low pressures and like the air in bladder design, the anti-extrusion plate and inlet size must be selected so that they do not impose a restriction on the flow into and out of the vessel. Each bladder vessel comes with these standard features: Safety relief valve Pressure gauge Air fill valve Drain connection Internal membrane (bladder) Any of our standard bladder vessels may be fitted with the following optional features: Leak detection system Level gauge Level transmitter Pressure transmitter Drain valve Flo-Dyne bladder vessels are pressure vessels and as standard may be manufactured in ordinary carbon steel, low temperature carbon steel or 304/316 stainless steel to the requirements of the pressure vessel code of your choice. Typically this will be ASME VIII or PD5500, however we can also manufacture to IBR or your local requirement. We will CE mark the equipment if it is to be used within the European Union, if the equipment is to be used elsewhere we will apply a CE mark where requested if possible.

Today Biturich serves as the technical wing of the group providing design and support services for projects including installation of tanks, PMB machinery and plants etc.

• Brand Name: DNK
• Capacity: 100-500 L
• Type: Liquid Manufacturing Vessels
• Finish: Polished
• Max Design Pressure: 0-10 bar
• Material: Stainless Steel
• Automation Grade: Automatic
• Power Source: 3 Phase / 50 Hz

• Material Grade: SS 316-304
• Max Design Pressure: 10-15 bar, 15-20 bar, 0-10 bar
• Capacity: 500-1000 L, 0-20 L, 20-100 L, 100-500 L
• Material: Mild Steel, Stainless Steel
• Features: High tensile strength,Dimensionally accuracy,Perfect finish
• Features: Verical Orientation, Horizontal Orientation, Insulated

Usually SVC reactors were imported from Austria for all these years. Now we have manufactured the largest SVC reactor in the country for 60 MVAR SVC system of ABB make. It has been successfully installed and commissioned at a SAIL steel plant since 2 years.

• DIA: 2500
• HEIGHT: 3500
• MOC Vessel: SS 316
• MOC Limpet: SS 316

• Type: Pressure Tanks
• Material: Aluminium, Metal, Steel
• Shape: Rectangular, Round, Square
• Application: Industrial Use
• Color: Black, Grey, Metallic, Silver, White
• Condition: New, Used
• Capacity: 0-500ltr, 1000-2000ltr, 16000-32000ltr, 2000-4000ltr
• Pressure: High Pressure, Low Pressure, Medium Pressure
• Feature: Anti Corrosive, Anti Leakage, Good Strength, High Storage
• Height: 0-5ft, 10-15ft, 15-20ft, 20-25ft, 5-10ft

• Material: Mild Steel
• Brand Name: SES
• Application: Viscous Fluid
• Features: Sturdiness , Less maintenance, Optimum finish
• Max Pressure: >15 kg
• Max Design Pressure: >40 bar
• Material of Construction: Glass Line Reactor

We manufacture heat exchangers and pressure vessels as per the international codes such as TEMA (Tubular Exchanger Manufacturers Association) class C & R standards, ASME Section VIII Div. 1 (unfired pressure vessels) with HTRI thermal design backup (member of Heat Transfer Research Institute) and PV Elite . As per the specific requirement, we carry out various testing such as visual inspection, Liquid penetrant, Radiography. Every equipment will be tested by pneumatic pressure at specified pressure with calibrated pressure gauges. The equipments are duly sand blasted and painted.

We manufacture flat bottom pressure vessel/filling vessel for sterile filtration from SS 316 l material with sight glass & safety valve.   Capacity : 5 ltr, to 50 ltr.

• Material: SS
• Feature: Eco-Friendly, Rust Proof
• Country of Origin: Made in India
• Orientation: Vertical Orientation
• Surface Finishing: Mirror Finish

• Material: SS
• Capacity: 300 to 500 litres
• Voltage: 220-415V
• Features: Easy installation, Resistant to rust, Robust structure
• Usage: Perfume
• Surface Finish: Mirror or Matt Polish

glass lined reactors, Mechanical Seals Manufacturers, Pump Seals

puf sandwich panels, eps panels, Cold Room, roofing panel systems

slag pots, Automobile Castings, mild steel galvanized products, Pulley

Storage Vessel, Steel Piping Fabrication, REACTOR, Stainless Steel Material

Tanks, Cooling Tower Fans, frp decorative sheets, Industrial FRP Products

Tanks, Dry Container, Hardware Products, Aluminium Foil

Pressure Vessels, Bearing, Chemical Storage Tanks, Conveyor Belt

Tanks, fibre reinforced plastics fans, fibre reinforced plastic gratings