Pressure Vessels Dealers in Kalyan West, Mumbai

Precisely designed in adherence with all defined industry standards of quality, we offer long service life Pressure Vessel. Known for their high pressure bearing capacity, we Manufacture, Export and Supply pressure vessels for air and gas systems. Our quality team makes sure that Pressure Vessel has robust structure and anti-corrosive nature. With our wide distribution network we make sure that all orders are delivered in the stipulated time frame. For competitive prices, contact us.

These are current limiting reactors except that such reactors provide low reactance under normal conditions and a high reactance under fault conditions. The reactor consists of two halves, wound in opposite direction to serve the above application.

• Country of Origin: Made in India
• Material: Stainless Steel
• Material Grade: SS 316-304
• I Deal In: New Only
• Automation Grade: Automatic
• Capacity: 1000 L
• Max Pressure: 10-15 bar

• Automation Grade: Automatic
• Material: Stainless Steel
• Volume: 5000l-10,000L

Pressure Vessel that we offer is well tested and therefore, is the perfect option on which buyers can easily rely. We are enlisted among the reputed Manufacturers and Suppliers of Pressure Vessel. We manufacture Pressure Vessel using high-grade basic material under the guidance of experts. We test the vessel on various quality parameters prior to its final dispatch. It can be obtained from us in small as well as bulk quantities.   Highlights : Ideal in Injectable Section for Filling Sterile Products. Provided With, Inlet - Outlet Nozzle and Safety Valve. Joints are Argon Welded A Long Tube is Provided to Ensure Complete Drawing Out of the Fluid. Working Pressure of 3 Kg/cm. Square.  For Air Tight Sealing Silicon "0" Ring is Used. Available Size - 5 Ltrs, 10 Ltrs, 20 Ltrs, 50 Ltfts, 100 & 200 Ltrs. Moc S S 304 / 316 / 316l • Cgmp Model with Documentation (iq, Dq Pq, 0q) as Option.

PP FRP tanks Excellent smooth surface to prevent dust from sticking to the wall. Tanks are completely sealed from inside in order to restrict any addition of foreign particles No metal components need to be in contact with water. Reinforcement, bolts and nuts for assembly are on the outside.

TFM + FRP REACTION VESSEL USED BY SURFACTANT INDUSTRY FOR THE REPLACEMENT OF DUPLEX STEEL WITH M-PTFE. M-PTFE PROVIDES GOOD WELDAIBILITY WITH CORROSION RESISTANCE. POLYPLAST IS THE FIRST COMPANY IN INDIA TO MADE SUCH A BIG REACTION VESSEL IN M-PTFE. THE REACTION CONTENTS ARE PURGED WITH STEAM AT 150°C, THE ACTUAL WORKING TEMPERATURE IS CLOSE TO 110°C.    

• Temperature: -60°C (-90°C) to +200°C

Chemical process equipment consisting of glass lined reactors or mixing tanks with distillation overhead in borosilicate glass can be operated at full vacuum and low pressure. A large variety of chemicals can be processed in such plants due to the highly corrosion resistant materials used. The design varies between multipurpose productprocess specific set ups. Feeders and receivers are made of glass for smaller units and of glass lined steel for larger setups. Shell and tube type heat exchangers are built with inner tubes made of borosilicate glass, glass lined steel, silicon carbide, tantalum or other metals depending on process parameters and other requirements. Such reactor configurations are used for chemical synthesis, distillation, reflux distillation, solvent recovery, rectification and other processes.

Multi-phase reactor systems are widely used in fine chemicals, oil and gas, petrochemical refineries,pharmaceutical, pesticides and in research centers.

• Brand Name: DNK
• Capacity: 100-500 L
• Type: Liquid Manufacturing Vessels
• Finish: Polished
• Max Design Pressure: 0-10 bar
• Material: Stainless Steel
• Automation Grade: Automatic
• Power Source: 3 Phase / 50 Hz

Fabricating process plant equipments such as Pressure Vessels, Kettles, Agitators, Reactors, Distillation Columns, Exchangers, Bleachers, Crystallizers, Cookers, Maturators, Toasters, Filters etc

We are a Mumbai based reliable Manufacturer and Supplier of Steel Dished End. The Steel Dished End, which we offer, is made from quality stainless steel and mild steel. Steel Dished End is mostly used in Pressure Vessels industry as a top and bottom parts of the vessel. Highlights Customized solution DurableEnsured high performanceHigh quality materials used Material : Stainless steel & Mild Steel Application : Dished ends are mostly used in storage or pressure vessels industry as a top and bottom parts of the vessel.

The air charge is contained within the tank, whilst the liquid from the main flows into and out of the bladder. Like the air in bladder design, the liquid does not come into contact with the tank walls nor the air charge, so again, the air charge cannot be absorbed by the pumped liquid and so air losses due to absorption are minimal. The pumped liquid from the main flows into and out of the bladder and will not come into contact with the tank walls, again compatible materials must be selected. As for the air in bladder design, the bladder is often made from a highly elastic rubber, such as butyl rubber, and may be sized to expand to fit the entire vessel. For this design the whole tank is pre-charged at installation with a pre-determined pressure to give the correct operating level in the tank when the unit is connected to the main and at the operating pressure. Again, there must be an anti extrusion plate fixed at the outlet from the vessel to prevent the bladder from being drawn into the main at low pressures and like the air in bladder design, the anti-extrusion plate and inlet size must be selected so that they do not impose a restriction on the flow into and out of the vessel. Each bladder vessel comes with these standard features: Safety relief valve Pressure gauge Air fill valve Drain connection Internal membrane (bladder) Any of our standard bladder vessels may be fitted with the following optional features: Leak detection system Level gauge Level transmitter Pressure transmitter Drain valve Flo-Dyne bladder vessels are pressure vessels and as standard may be manufactured in ordinary carbon steel, low temperature carbon steel or 304/316 stainless steel to the requirements of the pressure vessel code of your choice. Typically this will be ASME VIII or PD5500, however we can also manufacture to IBR or your local requirement. We will CE mark the equipment if it is to be used within the European Union, if the equipment is to be used elsewhere we will apply a CE mark where requested if possible.

• Storage Material: Water
• Material: Stainless Steel
• Application: Industrial

• features: Own tube layout,Full peripheral bundle entry of steam,Low bundle entrance velocities etc.

We manufacture and supply steam surface condensers for large scale utility power plants, industrial power plants and captive power plants. We offer condensers in rectangular and circular configurations for radial, axial or side steam entry options. Our experience includes current execution of 16 units of 600 – 800 MW class supercritical power plants with Titanium & Stainless Steel tubes. We successfully handle various metallurgies of construction – Titanium, Admiralty Brass, Aluminum Brass, SS, Cupro Nickel with clad constructions.

Usually SVC reactors were imported from Austria for all these years. Now we have manufactured the largest SVC reactor in the country for 60 MVAR SVC system of ABB make. It has been successfully installed and commissioned at a SAIL steel plant since 2 years.

• Feature: Rugged,Durable,Precise design
• Application: Water Purification
• Material: FRP
• Capacity: 500-5000 Ltr
• Max Design Pressure: 5-10 bar

• Material: FRP
• Size: Different sizes available

• Ideal In Injectable Section For Filling Sterile Products. • Provided With Inlet - Outlet Nozzle And Safety Valve. • Joints Are Argon Welded. • A Long Tube Is Provided To Ensure Complete Drawing Out Of The Fluid. • Working Pressure of 3KG/CM.Square. • For Air Tight Sealing Silicon “O” Ring is Used..