Process Control Equipment Dealers in Dahisar, Mumbai

• Type: Automatic
• Input Value: 230 V AC Single Phase Supply
• Usage: Auto Tension Control, Web Tension Control, Powder Brake
• Digit Display Size: Single Display

• Certification: CE Certified
• Application: Controls Water Level
• Weight: 40-50kg
• Voltage: 110V
• Display Type: Digital
• Automatic Grade: Automatic
• Power: 9-12kw
• Warranty: 1year

We are the one stop destination in market for availing precision engineered Automatic Water Level Controller. We make available Automatic Water Level Controller that is used to monitor and control the water level in both, underground and overhead tank automatically, using level sensor and on real time based working perfectly with the precise level control. To maintain the level in both the tanks, a level type float switch is used where one can adjust the level to where start and stop the water pump. An auto/manual switch is also provided in our offered Automatic Water Level Controller if you want to run the system in manual mode. A control panel with built in motor starter up to 50 HP for two pumps also can be incorporated as per the customer requirement. Automatic Water Level Controllers, offered by us, are used in societies, hotels, hospitals, corporate offices and for all the industrial applications.

Details : Fully solid-state design. Linear variation of speed. Suitable for 1/4 HP to 5 HP / single phase (4-wire or PMDC motors). Adjustable maximum and minimum Speed. Built in Current Limit / over Load Trip and Field Failure Protection. Control signal is optically isolated in modular design. Accepts speed control signal of (0-5) VDC, (0-10) VDC or (4-20) mA, hence suitable for machine automation. 1/4 DIN Size (TDM-10). Operates on 230VAC.

• Material: Stainless Steel
• Country of Origin: Made in India
• Usage/Application: Temperature Measurement
• Brand: D B Instruments
• Element Type: Simplex,Duplex
• Process Connection: Threaded,Flange,Tri Clover
• Sheath Size: 1 mm to 25 mm
• Triclover Connections: 0.5",1" and 1.5"

• Screen Size: 2.8 inch
• Weight: 120 g (Without Batteries)
• Model: i486
• Measurement Object: Human Forehead, Wrist, Room
• Measurement Distance: 1
• Measurement Range: Human Body: 33
• Measurement Accuracy: Human Body : ±0.2
• Measurement Mode: Auto Detection
• Memory: 99 Temperature Measurement
• Power: 2xAA Battery / Power Bank (5V) / Power Adapter (5V)
• Audio Mode: Human Voice / Beep / Off
• Human Voice Language: Hindi / English
• Display Mode: AM/PM, 24hr
• Operating Temperature: 5
• Relative Humidity: 15
• Storage Temperature: -20
• Relative Humidity: 15
• Max Power Consumption: ≤ 8W
• Product Dimensions: 112.5 x 82.5 x 28mm
• Installation: Wall Mount / Floor Stand / Other

• Type: Sterilization Indicator
• Application: Medical

CD-30 Dry heat sterilization chemical indicators

• Brand Name: PPC
• Material: ABS
• Current Type: AC
• Color: Black
• Condition: New
• Application: Industrial
• Size: 72(w)* 72(h)* 65(d) Mm (cutout- 68*68mm) 48(w)* 96(h)* 110 (d) Mm (cutout- 46*92mm) 96(w)* 96(h)* 110(d) Mm (cutout - 92*92 Mm)
• Feature: Auto Controller, Heat Resistance, High Performance
• Voltage: 220V
• Display Type: Analog
• Type: Blind Temperature Controller, FE-CON(J) / CR-AL (K) / PT-100 (RTD)
• Theory: Temperature Controller
• Frequency: 50Hz
• Temperature Range: 0-400C
• RANGE: 0 -250/400/600/1200 degree centigrade,
• OUTPUT: TIME PROPORTIONAL/ ON-OFF-RELAY- 6A/10A (1C/O)/ SSR
• SETTING: POTENTIOMETRIC SETTING
• INDICATION: DEVIATION METER
• POWER SUPPLY: 230 VAC / 50 HZ

• Features: Efficient operation,Low maintenance, Extended durability, Easy to use
• Brand: Sai Control
• Voltage: 260 VAC
• Phase: Single Phase
• Mounting: Wall Type
• Usage/Application: Industrial
• Type: Automatic
• Current: 5A
• Frequency: 50 Hz

Ultra mag series standard’s sanitary batch control system engineered for bulk, precision dosing and filling operations from drums, tote® tanks and kettles – virtually hands-free. This system utilizes a non-invasive full bore magmeter for flow volume measurement. Simply dial in desired volume, press enter, and the sanitary batch control delivers a preset volume of material within .05% accuracy. The system is an excellent solution for conductive food products, pharmaceuticals, and cosmetic materials. Common applications lotions shampoo chocolate pie fillings juice concentrates brine pharmaceuticals tomato paste features 3a certification large graphic display tri-clamp® fittings low shear design non-invasive measurement easy to clean design multi-language display standard or metric units of measure measures volume

Libratherm offers field proven models of microprocessor based multiple Ramp Soak programmable PID temperature controller PRC-300 & PRC 309 which are designed to improve reliability, accuracy and control in all temperature control applications. It features Ramp and Soak functions (the capability to control the temperature and its rate of change over a predetermined time span). One to ten different patterns each of sixteen rampsoak steps can be programmed into the memory with the user friendly membrane keyboard. Separate displays are provided to monitor simultaneously the Process temperature, Set temperature and the Program number. It can also be used as single set point control when the profile control is not desired. Inputs can be either Thermocouple, IR Thermocouple or RTD Temperature Sensors, or Voltage or Current Signals.It offers both switching outputs in the form of SSR or relay to drive external load contactor and continuous control outputs in the form of (4-20)mA or (0-20)mA or (0-5)volt or (0-10)volt which can be used to control heater power through Thyristor power pack (for electrical heating system) or to control the position of a modulating motor valve (for oil or gas fired heating systems). The analog outputs can be directly connected to Libratherm make single phase three phase SCR phase angle fired power controller which is ideally suitable for both resistive and inductive heating load. Additional 2 relays are also provided for time or temperature dependent event outputs as per the system requirement. The programmed profile and other parameters are retained in the non volatile memory in the event of power failure. Two types of rampsoak programming facility is available, one by programming end set points and time between the two set points and other by directly programming the rate of heating or cooling i.t.o. oC per hour and soaking time. Libratherm offers ready use control panel of small to large size incoportaing above controllers with thyristor, ssr and other panel accessories.PRC- 2000 IS Upgraded version of PRC 300 for Temperature 0.1 to 2000.0 oC.Application Heat Treatment cycle control in metal industry.Investment casting in jewellery industry (for wax burn-out furnaces).Environmental test Chambers.Furnace Oven control.

• Over Voltage withstand: 36 VDC max.
• Supply voltage: 5 to 33 VDC

LCD Base AMF Controller uses advanced single chip Micro-Controller for an easy and trouble free D.G. set control. It uses Jumbo 16 x 2 LCD display for Read out and memebran keypad for interaction with user for various parameter settings. It has Data logging facility to check every event.

Libratherm offers simple Digital Process Indicator Controller, which are low cost, accurate, rugged and reliable instruments available for indication and single and dual set point OnOff control for general-purpose process control applications. Indicators are available in display sizes of 0.5” to 4” for panel mounting and shop floor installations. Models featured here can be used to monitor and control the various industrial process parameters such as ACDC voltage and current, Pressure, Load, pH, ORP, Conductivity, RPM, Flow, Level, Humidity etc. Single and Two set points with relay outputs are provided for control or alarms. All instruments accepting 4-20mA are also provided with built in 12 to 24VDC loop supply.

• Features: High voltage input to brake for Max. Accuracy, Short circuit protection on sensor terminal, Auto reset , Proximity reset, Via. terminals at rear (foot switch).
• Item Code: PC27NX-Digital
• Brand Name: Veeraat
• Operating Mode: Digital,Time Base
• Max. Input frequency: 5 Hz
• Reset: Auto,Proximity,Via. terminals at rear (foot switch)
• Setting: 4-digits (0 to 9999 counts)
• Set point setting: Feather touch switch
• Restart timing setting: 0.1 sec to 4 sec. (Analog)

Markoprint X1JET is designed for different range of applications i.E. food & beverage, chemical, coated / uncoated materials, timber and the pharmaceutical industry   EASY TO USE No training necessary: printing with the Markoprint X1JET is simple, due to 3-logic intuitive operation with LED status light. Data transmission is is initialized with USB stick / interface.   UNIVERSAL AND FLEXIBLE USE Markoprint X1JET uses True Type fonts for printing. All conventional 1- and 2-dimensional codes* can be printed. The controller is fully integrated into the print module.   CONTROL Different performing system versions are available, with different functional features, depending on application requirements: Print, Basic, Advanced and Pro. The basic system version allows data transmission via USB stick. Each controllerhas a network connection (LAN) or a standard EIA-232 interface. Print layouts are created with iDesign software.   WIDE RANGE OF STANDARD ACCESSORIES Ein breites Tintensortiment bestehend aus wasser- und solventbasierten Tinten erschließt viele Anwendungen

Fully Automatic Water Level Controller Is Easy To Install. It Is Compatible With Both Float Sensors And Contact Pin Sensors. Manual Mode Is Available With The Click Of A Button. Can Drive A Single Phase AC Pump Of Up To 3 HP. We Have Both Single Tank And Dual Tank Versions. Wide Voltage Range Of 100-240VAC 50/60Hz.   

• Feature: Minimum maintenance, Attractive design, Durable finish standards.

Specifications Accurate control of Torch to work distance be it Cutting of Welding, plays very important role for the quality of the end result Torch Height Controller (THC) is also known as Arc Voltage Controller (AVC) it is the device which maintains the arc gap between the torch & the work piece. Stepper motor driven vertical slide with motor driver & the controller allows the torch to move up or down depending upon the parameters set. Arc voltage which acts as a Feedback to the controller as reference voltage, allows operator to set the Torch to Job gap as per the process & the quality requirement. Arcraft Plasma has introduced Digital model DigiTHC100 Features of the DigiTHC100 are.......... Suitable for welding processes like TIG, Plasma welding, PTA or Powder plasma welding. Suitable for Plasma Arc cutting. Wide range of Arc voltage acceptability. Well protected from the High Frequency interference. Piercing program for plasma cutting. Programmability in terms of Arc Voltage or Arc Gap distance. Independently adaptable to any Plasma cutting or Welding power source Independently adaptable to CNC profile cutting machine. Independently adaptable to Welding Automation. Initial Height Sensing (IHS) comes in handy to pre-adjust the required gap before start of process. Advantages of DigiTHC100 Plasma Cutting Improvement in cut quality Improvement in consumable life upto 20% High productivity at high dimensional accuracy of cut components. Elimination of near collision condition of Torch & job. Welding Uniformity of weld beads Controlled weld heat input eliminates chances of higher percentage of dilution, lack of penetration, undercut etc. Easy adjustment of weld pool fluidity depending upon the application of weld & welding process by maintaining the constant gap & hence the heat input. Dramatic improvement in weld aesthetics.

• Display Type: Digital
• Brand: Fuji PLC
• Output Type: AO & DO
• Usage/Application: Industrial
• Current: >2 A
• Program Language: Ladder
• Type Code: AC
• PID Control: Yes
• International Standard: CE
• Degree of Protection: IP67
• Connection Method: Relevant

• Size: AS PER CUSTOM REQUIREMENT
• Type: AS PER CUSTOM REQUIREMENT
• Brand Name: Indosonic
• Material: AS PER CUSTOMER REQUIREMENT
• Application: TO MEASURE TEMPERATURE
• Operating Temperature: -200 TO + 650°c
• Theory: RESISTANCE
• Rated Power: OHMES
• Technology: ELECTRONIC
• Accuracy: CLASS A AND CLASS B
• Certificate: ISO CERTIFIED AND CALIBRATION REPORT TRACEABLE TO NABL STANDARDS
• Country of Origin: INDIA
• Model Number: SINCE SIZE VARIES NO MODEL NUMBER CAN BE GIVEN
• COLOUR CODE STANDARD: AS PER REQUIREMENT

Rtd Probes, Mercury in Steel Thermometers

• Brand Name: West Control Solutions
• Model Name/Number: 6100+ & 8100+ & 4100+
• Enclosure: IP66
• Certifications: CE,UL,ULC,CSA
• Sampling Time: 4 per second,14 bit resolution approximately
• Output Type: Relay,SSd,DC linear V or mA,Triac,24V transmitter power supply
• Product Category: Single Loop Controller
• Dimensions and Size: 48mm x 48mm x 110mm (HxWxD),1/16 DIN; 96mm x 48mm x 100mm,1/8 DIN; 96mm x 96mm x 100mm,1/4 DIN
• Primary Input Type: Universal (TC,RTD,DC linear mA/mV)
• Other Inputs: Digital,Remote setpoint
• Max. Number of Outputs: 3
• Control Type: PID,ON/OFF,Manual,Alarm,Ramp to Setpoint
• Power Supply: 100-240V AC 50-60Hz,20-48V AC 50/60 Hz,22-65V DC
• Communicatons: RS-485 serial (West ASCII or MODBUS)
• Panel Sealing: IEC IP66,NEMA4X

• Power: 24VDC/5A(+- 10%)
• Application: CNC controller
• Maximum Speed: 6000 mm/min (240 IPM) 1200 rpm
• Voltage Control Accuracy: +/- 1V
• Arc Voltage Range: 50-300V

tension controller, AC Drive > MFDDTB3A2 (5KW), Flexible Packaging

Maximum Demand Controller, Automatic Power Factor Controller, Power Monitor

Resistance Temperature Detectors, Thermocouples, Temperature Indicator

• Range: 0-1200°c
• Range : : 0-1200°c
• Sensor :: Cr/AL(K), Fe/cu(j) or PT-100 / (RTD), 2 Wire, 3 wire etc.
• No.of Points :: 1,6, (8,12 in Double DIN)
• Display :: 31/2 Digit LED of 0.5" Height
• Accuracy :: +/- 1% FSD
• Channel Selections :: Rotary Switch
• Cold Junctions :: Automatic Compensation
• Front Dimension :: 96x96 mm. DIN
• Panel Cut-out :: 92x92 mm.

• Phase: Single Phase
• Power: 1kW-100kW
• Frequency: 50Hz/60Hz
• Brand Name: Micromot Controls
• Operating Input Voltage: 40 to 60 VDC
• Operating Ambient Temperature: -40 to 85 c degree

Rtd Cables, Shielded Cables, security systems cables, Screened Cables

Built-In Programmable Limit, Proportional (Pulse Length or Pulse Frequency) - ideal for precision process control applications :: User-Customization through Advanced Setup Menu offers flexibility in matching the controllers functions to suit individuals specific requirement :: Automatic Calibration with Auto-Buffer Recognition eliminates mistakes during calibration :: Symmetrical Mode Operation eliminates electronic noise problems when used with solution ground :: One-Point Online Calibration without shutting down the line :: Hold Relay for use with float switchesflow switches and other controllers as a failsafe function :: Two Level Password Protection prevents un authorized tampering with settings :: 0 to 2000 Second Time Delay Adjustment on control and alarm delays :: Galvanically Isolated Scaleable 0-204-20 mA Outputs for pHORP :: Wash Contact Relay controls electrodes cleaning systems at desired duration and frequency :: Choice of Glass or Antimony Electrode for general purpose or hydrofluoric acid applications :: Adjustable Hysteresis (Dead Band) prevents rapid contact switching near set point :: Non-Volatile Memory retains all stored parameters and calibration data even if power fails