Process Control Equipment Dealers in Koldongri, Mumbai

• Color: Black/ Grey
• Usage: Industrial
• Name: PID Controller

Input: J, K, R, S, T, RTD Control Action: On Off PID Control Logic: Heat/ Cool Auto tune: Yes Power Supply: 230 V AC +/- 10%

• Type: Pmdc Motor Controller
• Color: Black
• Voltage: 180VDC
• Frequency: 50hz
• Body Material: ABS
• Power Source: Electric
• Phase: Single Phase
• Warranty: 1year
• Country of Origin: India
• Dimensions: 72mm (H) x 72mm (W) x 110mm (D)
• Panel Cutout size: 68mm x 68mm
• Input: 220 VAC / 50 Hz
• Output: 0-180V DC
• Motor: 0.5 HP / 1 Hp also available
• Input Phase: Single Phase

• Model Number: GIC Make

We are offering rtd-thermocouple sensors. J,k,e,t,n,r,s,b type thermocouple, single, duplex (triplex on request), weatherproof to ip-68 (is : 13947 part i) flameproof for gr.i, iia iib (equivalent to nec. C1, i, div 2 gr.b,c &d) - ccoe certified,atex certiified, ce certified optional : a) thermowell b) head mounted temperature transmitters c) adjustable compression fitting or flange

Digital Temperature Controller heat or cold generators (with manual and programmable automatic defrosting).Temperature display and adjustment. All purpose temperature controller. Front panel functions :- Relay ON Indicator. Defrost Indicator Alarm Indicator Timer Indicator Keypad Lock Indicator

Range 12-1500Kgs. Main Features : . The main machine adopts high efficiency mini hot water pump or oil pump with reliable function, small size and light weight. . Adopts imported digital temperature control gauge. . Can improve the color of product and stabilize the quality of product. Application: . Use in plastic and rubber industry, chemical and pharmaceutical industry, textile industry and any other situation where temperature controlling necessary. . Use in producing plastics which high temperature mould necessary and high accuracy necessary.

Solid-state technology, combined with multiple-level protection, ensures dependable performance. Components are coated to protect them against moisture and meld them more solidly into a single unit that resists vibration. Easy interval selection “tunes” the on-board lubrication system’s output to meet changing environmental conditions.  Memory capability assures lube protection The manual run button facilitates start-ups, filling or purging lines and lube points, as well as testing for integrity of the lube distribution lines.  Very simple to install, the DC Timer requires just four mounting screws and connection of five wires

• Application: Cooling Chamber, Heat Treatment Furnace,Laboratory
• Color: Black
• Packaging Type: Box
• Automation Grade: Automatic
• Power: 230 V
• Response time: 0.33 sec
• Warranty: 1 year

• Features: Low maintenance, Highly efficient

• Type: Digital
• Color: Black
• Voltage: 230VAC
• Brand: Honeywell
• Model No.: 1000 Series
• Control Type: PID/On-Off
• Power: 100 to 240 VAC
• Display Size: 48x48mm
• Payment Terms: T/T (Bank Transfer)

We Offer Humidity & Temperature Indicator. HTI-01 is a unit, which provides an integrated measurement solution for HVAC control systems. The unit interfaces directly with a humidity sensor and temperature input provides local indication of Humidity & Temperature. Feature • Input 1 : 0-10V DC Humidity sensor proportional to 0 to 100% RH. Impedance > 100 Kilo ohm. • Input 2 : 0-10V DC Temperature sensor. Range 0 to 50oC. • Display : Two separate display for indicating Humidity and Temperature. • Resolution : 0.17 Rh & 0.1oC. • Accuracy : 1.0%. • Auxiliary Supply: 24V AC or 240V AC, 3VA max. • Dimension: 120mm x 210mm x 50mm

• Feature: High efficiency Long lasting service High segment LED display
• Ranges: Sensor Dependent
• Covering: 200 C to 1700 C
• Resolution: 1 C, 0.1 C.

With enriched industrial experience and knowledge, we are providing an excellent range of Digital Temperature Indicators to our clients. Designed with utmost precision, the offered indicators are manufactured using optimum quality components and advanced technology. In addition to this, our products undergo various tests under the supervision of quality controllers, in order to ensure their flawlessness. Provided indicators are used in numerous industries such as food, medical, automotive and other engineering industries.

• Pressure ranges from vacuum to 3,000 psi (200 bar) • Precision model accuracy of 0.005%RD + 0.005%FS • Standard model accuracy of 0.02%FS • HART Communication and Profibus PA (only 780) • Control stability of 0.003%FS • Easy-to-use icon based user interface

• Type: Temperature Controller, On/ Off And PID
• Application: Industrial
• Color: Black
• Feature: Durable, Stable Performance, High Accuracy
• Voltage: 110V, 220V
• Display Type: Digital
• Theory: Temperature Controller
• Frequency: 50Hz, 60Hz
• Driven Type: Electric, 24V
• Certificate: ISI Certified
• Current Type: AC
• Country of Origin: India
• Brand Name: Premier Electrosystems

• Features: Precise design, Accurate result, Long service life
• Accuracy: + - 1% of the scale
• Power: 230 V AC.-1 Phase
• Sizes: 72 x 72 OR 96 x 96 mm.).

• Type: Automatic
• Brand Name: Radix
• Feature: Full featured
• Controller Type: PID
• Usage:  application requiring precision,where there is no margin
• Digit Display Size: Dual Display
• Analog Output: Upto 2
• Communication Interface: RS485 / MODBUS RTU
• Size: 96*96*100
• Relay Output: Maximum 4
• No. Of Input: 2*Universal input
• Digital input: No
• Display digits: 4+4+3
• Transmitter supply: Yes

TC49SU is a mid-range programmable temperature controller; feature-rich and cost-effective at the same time. It accepts input from 8 types of thermocouples (B, E, J, K, N, R, S, T), Pt100 3-wire RTD sensors and optionally, 0 - 10 V DC and 4-20 mA or 0 - 20 mA linear inputs. A large LED display on the front of the temperature controller indicates the process value while 2 additional LEDs indicate the status of each of the two relays. Buttons on the front of TC49SU allow operators to easily program up to 2 setpoints for the process value. With an error of only 0.1% of full-scale value, this is a temperature controller of superior accuracy. TC49SU's two electromagnetic relays trigger heating, cooling or full-scale high and low alarms. It also retransmits an isolated current or voltage output signal to other devices such as a Programmable Logic Controller (PLC) or Solid-State Relay (SSR). Signal isolation protects your devices and machines downstream of our instruments from damaging fluctuations in the input signal. TC49SU is conventionally an ON-OFF controller that outputs a discrete signal, but can also be used in Time-Proportioning Mode which turns the actuator on and off for periods proportional to the desired control effort, to emulate a continuous actuator that can generate a control effort between 0 and 100%. This product features Radix's proprietary sensor-break indication technology.

The PID Stress Relief Programmer Controller is used for controlling the rate of heating, soaking and rate of cooling during stress relieving operation. It can be used in conjunction with the power source unit or other contactorised units. Features Control Types PID with Pre-tune and RaPID fuzzy logic, or Manual Tuning. Heat or Heat / Cool, applications Auto/Manual Selectable from front panel, with bumpless transfer Output Configuration Up to 3 total. Max 2 for control (Heat & Cool), max 2 for Alarms, max 1 for retransmit PV or SP Alarm 1 & 2 Types Process high, process low, setpoint deviation and band Human Interface 4 buttons, 10mm & 8mm high LED’s, plus run-hold, tune, event & profile / control status LED’s PC Configuration Off - line configuration & profile editing via config socket (comms option not required)     Profiles Number of Programs 4, each with 16 free-form segments (Ramp/Dwell/End). Max segment length 99 hours 59 minutes Delayed Start Max 99 hours 59mins delay from initiation to program start Guaranteed Soak Holds program if PV is outside of specified hold band during dwell segments. Program Cycles 1 to 9999 or infinite (continuously re-starts program at end) Ramp Rate Definition Either ramp rate, or time to final setpoint Power Loss Recovery Hot (continue profile from point of power fail) or Cold (end profile and return to controller mode)     Input Thermocouple J, K, R, S, T, B, L, & N. RTD 3 Wire PT100, 50W per lead maximum (balanced) DC Linear 0-20/4-20mA, 0-50/10-50mV, 0-5/1-5/0-10/2-10V. Scaleable -1999 to 9999, dec point available Impedance >100MΩ for Thermocouple and mV ranges, 47KW for V ranges and 4.7W for mA ranges Accuracy +/- 0.25% of input span +/- 1 LSD (T/C CJC better than 0.7°C) Sampling 4 per second, 14 bit resolution approximately Sensor Break Detection 500,000 operations DC for SSR Drive capability >4.2V DC in 1KΩ (10V 500Ω version available) DC Control/Retransmit 0-20/4-20mA into 500Ω max, 0-10/0-5V into 500Ω min. Control OP +/- 0.5%, Retransmit +/- 0.25% Solid State (Triac) 0.01 to 1 Amp AC 20 to 280V, 47 to 63Hz Remote Run-Hold Volt free or TTL input (Hold = -0.6 to 0.8V or contact open, Run = 2 to 24V or contact close) Communications 2 Wire RS485, 1200 to 9600 Baud, Modbus     Operating & Environmental Temperature & RH 0 to 55°C (-20 to 80°C storage), 20% to 95%RH non-condensing Power Supply 90 to 264V 50/60Hz (optional 20 to 55V AC/22 to 65V DC), approx 4 Watts Front Panel Protection IEC IP66 (Behind panel protection is IP20) Approvals and Certification CE, UL & Ulc  

• Theory: Temperature Controller
• Brand Name: Dixell
• Application: Industrial
• Place of Origin: Italy
• Model Number: XR

• Brand Name: TAGLab

We are offering proportional control system,. Proportional action on different actuated error signals generated externally control of proportional rate & study of its effect on the controlled signal electronic simulation.

• Temperature Range: 0 deg C to 70 deg C
• Voltage: 230VAC 
• Item Code: SZ-7552P-7562P
• Relay Output: 8(3) A
• Temp Sensor Input: 2 NTC
• Alarm Relay output: 5 A
• Panel Cutout: 29 x 71 mm
• Screw Terminals: Admit 1 x 2.5 mm2 wire

PID Soft Start controllers are especially designed for hot runner coil heaters and tubular heaters. It is very efficient and economical. Multi zone hot runner controllers are made by individual temperature controller modules assembled in a cabinet. Soft start facility in this controller will help evaporate any moisture present inside the heater. The coil heaters have MgO content, and are therefore hygroscopic in nature. If kept unused for long periods, there is moisture deposition on the terminals. So we recommend de-moisturizing the heaters by preheating at 100° C to 120°C using controllers with soft start functions.

• Power: 110 MW

EPC players can offer complete EPC services for solar farm installations from 100KW and above. Our EPC partners have installed solar power plants aggregating more than 110 MW across the globe. Solar farms engineered by PV Powertech are designed to work with a high degree of efficiency to achieve a minimum performance ratio of at least 80%. We provide our customers with a complete end to end solutions beginning with initial feasibility analysis until the final installation of the power plant and connection to the grid.

These are Units with Digital Temperature Indicator cum Controller. They are mounted in a Acid Alkali resistant PVC Polypropylene Body with suitable gasket to prevent fumes inflow into the body. The Units are complete with a PT 100 type Sensor which can be installed in the Plating Vat using Titanium or Glass Tubing. The Units are easy to install and maintain.

• Color: Brown, Grey, Light White
• Voltage: 110V, 220V
• Condition: New
• Application: Cascade Control,Temp-Humidity
• Automatic Grade: Automatic
• Power: 3-6kw, 6-9kw
• Driven Type: Electric
• Warranty: 1year, 2years

We are the main supplier of this product.

• Feature: Special design allows better heat transfer, Easy to clean, In line operation, ATEX certified sensing element

    • Compact with total wireless interiors • Only of its kind with LCD and MMIC type of front fascia    makes it easy to use even for anunskilled person • IDICATIONS for D.G Set start and stop and all faults   (LLOP, HWT, O/S, O/L, LOW, battery,SFS, LFL, HZ Fault, Fail   to Stop, C.B Fail etc) and Auto Load Change over REMOTE   monitoring & control facility available (optional)• Connecting of external Indicating lamps & pushbuttons is    possible with very simple wiring• RS 232 / 485 Compatibility (optional)• ANNUNCIATION with flasher & buzzer both, including    ACCEPT, RESET, & TEST facility.• Facility for connection of external HOOTER• Design facilitates easy and quick installation.• Virtually MAINTENANCE FREE.• Existing non-AMF panels can be easily converted in to AMF    panels using AMF-futuro.• First time with Semi Auto Mode of Operation • Password protected settings.• Programmale fault inputs