Process Control Equipment Dealers in Mahim, Mumbai

This ampere hour meter is designed to control rectifier during battery formation process. IM2508 ampere hour profile meter is a programmable step profile type device. In the process of the battery formation, the battery has to be charged at different ampere hour capacity in steps. To list some special features of IM2508 are short circuit monitoring, starting current control and bar forming timer

• Display: Four digit LED display for parameter indication and 4 digit for set point indication.
• Features: Micro controller based Digital Circuitry. Dust proof membrane keypad for programming. High Low relay alarm outputs optional.
• Input: RTD Pt100 / Thermocouple/4-20 mA / 0-10 V (factory set)
• Control Output: 4-20 mA or 0-10 V
• Size: 96 x 96 x 150 mm. (DIN standard).
• Output:  4-20 mA
• Accuracy:  0.1 C / 0.2 C +/- 1 digit (range 199.9 / 399.9)/1 C +/- 1 C for thermocouple

• Display: Four digit LED display
• Model: IM 3509
• Input interface: PT 100 RTD for temperature
• Humidity sensor Input: 4-20 mA, 0-10 V or 0-3 V
• Control Relay: 230V / 5A (resistive)
• Connectivity: RS 232 Serial Interface for PC or Serial Printer (

Digital Vacuum Controllers with Vacuum Display for Accurate Controler of Vacuum in Reactors and lab units...

• Temperature Range: -199.9 to +199.9 / 399.9 Degree C
• Output Supply: 5 V / 12 V / 24 V optional
• Resolution: 0.1 C
• Accuracy: 0.1 DegreeC
• Relay: 230 V/5A (resi)
• Memory: 8k / 32k / 64k
• Size: 96 x 96 x 150 mm

We are supplier and exporter of this product.

This ampere hour meter is designed to control rectifier during battery formation process. IM2508 ampere hour profile meter is a programmable step profile type device. In the process of the battery formation, the battery has to be charged at different ampere hour capacity in steps. To list some special features of IM2508 are short circuit monitoring, starting current control and bar forming timer.

• Water Tank Capacity: 6.5 Liters

3 in 1 - Dehumidifier, Air - Purifier and Dryer,Energy Efficiency Grade 1,Moisture Removal (Running Temperature): 13 L (26.7℃ 60%RH) 22 L (30℃ 80%RH),Power Controls : LCD Display Touch Control,Recyclable Materials for Environmental Conservation,Voltage Frequency (VoltsHz) : 220 - 240V, 50Hz.

A mechanical switch in a plastic casing, freely suspended at the desired height from its own cable. When the liquid level reaches the regulator, the casing will tilt and the mechanical switch will close or break the circuit, thereby starting or stopping a pump or actuating an alarm device. No wear, no maintenance! In sewage pumping stations, for ground water and drainage pumping - in fact, for most level control applications - the ENM-10 is the ideal solution. The regulator casing is made of polypropylene and the cable is sheathed with a special PVC compound. The plastic components are welded and screwed together. Adhesive is never used. Impurities and deposits will not adhere to the smooth casing. The level regulator is available in different versions, depending upon the medium in which it is to be used. As standard, the regulator can be obtained with 6, 13, 20, 30 or 50 metres(20, 42, 65, 100 or 167 ft) of cable for liquids with specific density between 0,95 and 1,10 g/cm³; for other specific densities, the regulator is only available with 20 metres (65 ft) of the cable. The regulator can withstand up to 60º C (140º F).

• Driven Type: Electric
• Application: Industrial
• Front panel size: 48x96 mm
• Depth: 58 mm
• Indication accuracy: RTD input: +-0.2%
• Sampling rate: 50 ms

We are a Dealer, Supplier of Hanyoung Nux. We stock and supply running models are Hanyoung Nux Temperature controller, Hanyoung Nux Recorder, Hanyoung Nux Counter / Timer, Hanyoung Nux Panelmeter, Hanyoung Nux Sensor/Encoder, Hanyoung Nux TPR/SSR/SMPS, Hanyoung Nux Control switch, Hanyoung Nux Limit / Micro switch, Hanyoung Nux Power / Main / Cam switch, Hanyoung Nux Hoist / Foot / Mono Lever switch, Hanyoung Nux Sign Tower / Signal light, Hanyoung Nux Buzzer / Terminal block. We are supplier in India, Mumbai, Delhi, Ahmadabad, Chennai Pune, Nashik, Vapi, Aurangabad, Nagpur, Sangli, Satara, Ichalkarnji, Solapur, Kupwad, Kolhapur, Pimpri, Chinchwad, Jalgaon, Silvassa, Surat, Baroda, Morbi, UAE, Indore, Bhopal, Gurgaon, Faridabad, Ghaziabad, Noida, Coimbatore.

Resistance Temperature Detectors, BI METAL DIAL THERMOMETER, FITTINGS WASHER

Display: 2 Line LCD module with backlights Unit: Programmable as required Selectable filter: Upto 8 Degree Input: Full bridge , 4 to 20mA, Voltage upto 10V, Half bridge Function: Mode, Zero, Unit , Maxmin, Peak etc Output 1: RS232 Internal Power: 9V PP3 battery MOC: ABS PC Power Supply: 190VAC to 250VAC for SMPS adapter No. of Key : 5 No. Firmware: Programmable as per requirement.

• Brand Name: Siemens
• Warranty: 1 Year
• I Deal In: New Only
• Product / Type: PLC

The SIPROTEC 7SC80 feeder protection can be used for protection and automation of medium voltage distribution feeders with grounded or low resistance grounded, isolated, or compensated neutral point.The 7SC80 features flexible protection functions. 20 additional protection functions can be created by the user. For example, a rate of change of frequency function or a reverse power function can be created. The relay provides circuit-breaker control.Additional primary switching devices (grounding switches, transfer switches and isolating switches) can also be controlled from the relay. Automation or PLC logic functionality is also implemented in the device. The integrated programmable logic (CFC) allows the user to add own functions, e.g. for the automation of switchgear (including: interlocking, transfer and load shedding schemes). The user is also allowed to generate user-defined messages. The upgrade of device and communication firmware is also possible via Ethernet.HighlightsSupport of feeder automation applications, e.g. fault isolation and service restaurationDesigned for harsh environmentExtended temperature range 50 C up to 85 COpen for all different communication technologies, e.g. radio, which are used for feeder automationIntegrated GPS module is available for time synchronisationFull remote access supported for firmware and parameter updates and upgradesA web based HMI provides complete remote control of the device9 programmable function keys6-line displayIntegrated switch for low-cost and redundant optical rings. Devices can be connected directly with each other at electrical modulesParallel running communication protocolsRedundancy protocols RSTP, PRP and HSR for highest availabilityCurrent Jump detectorExtended CFC capabilities24 km Single mode interfaceRTU version without protection featuresSecondary current transformers values (1 A / 5 A9 settable using DIGSIBuffer battery exchangeable from the sideUSB front portRelay-to-relay communication through Ethernet with IEC 61850 GOOSEStainless steel housingMillisecond-accurate time synchronization through Ethernet with SNTPInputs for Low power CTs and VTs according IEC 61869-6 (formerly IEC 60044-7 and IEC 60044-8)

The High Temperature Thermocouples, which we deliver, are known for their make and long service life. Buyers are free to place orders, safe and timely deliveries are guaranteed with us. With the assistance of our experts, we have become capable of providing superior-grade products to the clients as we source the raw materials only from dependable vendors.

• Brand Name: Autonics
• Place of Origin: Maharashtra, India

pH Controller, data logger scanner, Embedded Controller

• Display Type: 4 Digit/7 Segment
• Brand: Honeywell
• Model No.: DC1000 Series
• Control Type: PID/On-Off
• Mounting Type: Panel
• Frequency: 50/60 Hz

• Input: Thermal Couple K E J S
• Thermal Resistance:: Pt 100 Cu50

The XMT*3000 digital temperature controller can replace traditional display meter. It adopts three - positions keys to set freely and single 4 digit LED display. It has 2-on / off control , it is simple digital meter with control capability more reasonable . Range: K (0 to 1300 deg C); E (0 to 800 deg C)                               S (0 to 1600 deg C); J (0 to 1000 deg C)                                            Pt100 (-200.0 to 200.0; 0 to 600 deg C)                                Cu50(-150.0 to 150.0deg C) ·          Display: 4 digit LED display        OUT Indicator Light: When OUT is ON, a green LED light .        Set key (SET): Switches the setting mode and registers the                                     setting value and selected value .              Dec Key : Decreases numeric value of the setting value .               Inc Key : Increases numeric value of the setting value .  ·          Basic Error:  +/- 0.5 % +/- a dot of the total range of the input. ·          Control Output:  Relay contact   AC 250V    7A (impedance)  ·          Control Means: 2 - on / off control  ·          Power AC 220 V   (50/60 Hz )  ·          Work Environment: temperature 0 - 50 deg C, Humidity < 85 % RH, No corrode  ·          Size:  XMTG 48x48x90 mm   Hole 44x44