Process Control Equipment Dealers in Tilak Nagar, Mumbai

The company has gained trust of the clients by manufacturing and supplying the best quality Water Level Controller. Water Level Controller has number of automatic features which set the operator free from operating the pump and save overflowing of water and electricity. Further, the international designing and structure of Water Level Controller is widely appreciated. Working :The water level controller {WLC} first checks underground water in the underground tank to the predefined upper level. Once the predefined upper level is achieved in the underground tank and if the overhead tank is empty (below predefined lower level) then the WLC switches on the pump. Whenever the pump starts, just after a minute the WLC checks the water flow. If the water flow is not achieved then the WLC gives the Dry Run audio visual indication and stops the pump. This saves the pump from dry running and saves electricity. Similarly when the water flow is sensed then the WLC checks the levels of water in the underground tank as well as overhead tank simultaneously. Once the water in the overhead tank fills up to the predefined upper level or the water is pumped below the predefined lower level in the underground tank the pump is switched off automatically. The WLC takes feedbacks from the float sensors and checks the levels of water in the overhead tank as well as the underground tank regularly. Similarly when the overhead tank gets empty, the WLC starts the pump provided there is enough water in the underground tank.Key Specifications : Dimension’s - W: 125mm H: 180mm D: 62mm. Power Supply – 230 Volt AC 50Hz. Power consumption – 6 Watts Advantages of float sensors : Sensor is enclosed in water proof capsule. As no electric supply in water so no electrolysis. Doesn’t require cleaning. Lifelong with free maintenance. High accuracy. Works on low voltage. Less power consumption.  

We specialize in offering highly efficient digital bell controller, which is acknowledged for its easy programmability. The digital bell controller basically allows control over the duration of the ringing of the digital bell. This digital bell controller is appreciated for its application in schools and colleges. This digital bell controller enables a clear bell ringing signal while ringing. why our digital bell controller? always rings the bell at right time every timeensures accurate control over bell systemmaintains the real time bell time even during power failurescustom designed and installed as per the specific institution’s requirements

• Type: Automatic
• Color: Grey
• Voltage: 220 V
• Frequency: 50hz
• Material: Mild Steel
• Power Source: Electric
• Phase: Single Phase
• Warranty: 1 Year

Torque Controller Cable Reeling Drums are used for Heavy duty cables and where Cable length is more. i.e Gantry Cranes.

• Material: Metal
• Voltage: 380V, 440V
• Condition: New
• Application: Industrial
• Automatic Grade: Automatic
• Feature: Digital Water Meter Display, Lorawan Compatible, Spiral Water Meter
• Warranty: 2 Years

We have carved repute as a prominent Manufacturer & Supplier of Temperature & Humidity Controllers in Maharashtra, India. We are supported by a group of personnel who make use of the finest material for their production and compiled them in line with industry standards. Owing to our smart network, timely delivery of the placed order is what we always execute. Our Temperature & Humidity Controllers are obtainable at the modest prices!

• Supply Ability: 20 Piece/Pieces per Month
• Place of Origin: Maharashtra, India
• Port: Nhavasheva
• Packaging Details: Wooden Box

we are offering air bubble controller.performance and features: this instrument is install near size ring of plastic extraction machine to easy operating reducing air leakage, reduce size variation even through puncture reducing wastage in production, easy operating saving time.   technical specifications:   operation: - when film get puncture in bubble size will reduce so bubble air controller is automatic on & flow of air is start and stop when actual size is received which we have preset..

One of the strongest heads on the market with a payload of 50kg (110 lbs), making it suitable for 3D camera rigs Zero backlash, no delay unlike ordinary worm gear drives High resolution drive for smooth operation and crisp responsiveness Quick set-up due to a unique plug & play design and simple Mo-Sys bus cabling system Simple, intuitive touchscreen control Unrivalled ease of adjustment Can be underslung, getting the lens closer to the floor than a geared head. With the slip ring fitted option, the Lambda head is capable of continuous, multi-turn 360 degree rotation in all axes without the worry of cable wraps.

• Temperature Range: 0-300 degree.
• Input supply: 150-270 VAC.
• Details of output relay: SPDT, Goodsky RWH-SH-112D, Contact rating 1Amp/240VAC.
• Size of the enclosure: 96x96x85, Cut out of panel 92x92.
• Display: 6 digits, size 1/2 x 3/4 inch and 7 segment with red color.
• Temperature sensing probe: PT 100
• Resolution: 1 degree
• Status indication: LED for relay status
• Sensor break protection: Auto switch off on sensor break, "OPEN /

The TC 09 is a proportionate temperature controller with dual display and digital calibration. This proportionate controller decreases the average power supplied to the heater as the temperature approaches set point. This ensures that it will not overshoot the set point and maintain a stable temperature. This proportionate temperature controller maintains a stable temperature due to the inbuilt proportionate band which has two fixed parameters and these are PB and PT. PB is set at 5 degrees and PT is fixed for 30 seconds. If the set temperature is 100 degrees, the PB & PT will activate at 95 degrees. At this point, the ON time of the heating is 60% of PT and OFF time is 40%. This means an ON period of 18 seconds and off time of 12 seconds. When the temperature reaches 99 degrees, the ON time of the heating will be 40% and off time 60%. The controller has two displays. The first one indicates actual temperature and other indicates set temperature. The main advantage of this controller is the calibration which has been done digitally through software. There is no need to calibrate the controller every year and nobody can alter the setting as it is protected with password.

we are offering PLC compatible vibratory feeder drive. RHY-101 is a thyristor phase angle control drive for vibratory feeders. its control is derived from a 4-20 ma analog input. RHY-101 is designed to respond from 0 to 99% for 4-20 ma input. however the actual vibratory response may start, anywhere from 10 -15 % and may saturate from 85 to 99 %. RHY-101 is housed in a panel or wall mounting enclosure 192mm (h), 48mm (w), 110mm (d). The wiring for the feeder coil, power supply (either 230v or 50v ac) and the low power control input are provided in two groups of pluggable screw termination.

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design.

Head:Cast aluminium / Stainless steel   Assembly :3 - Wire Simplex / 6-wire duplex   Temp.range:- 200° to 449°   Immersion length:300 MM/in multiple of 100 MM   Sheath Dia.:6 MM and MOC : SS 316

• Product Applications: Air Handlers,Clean Rooms.

The Digihelic® Controller just got better with the New Series DHII Differential Pressure Controller. The DHII takes all the fabulous features of the standard Digihelic® Pressure Controller and packages them in a robust NEMA 4 (IP66) housing. The Digihelic® II Pressure Controller combines the 2 SPDT control relays, 4-20 mA process output and Modbus® communications with a large, brightly backlit 4 digit LCD display that can easily be seen from long distances. The electrical wiring has also been enhanced in the DHII with its detachable terminal blocks. The removable terminals allow the install to easily wire the terminal block outside the housing and then attach to the circuit board, reducing wiring difficulties and installation time on the process. The Digihelic® II Differential Pressure Control in the new NEMA 4 (IP66) enclosure enables this product to be the perfect choice when mounting pressure controls outdoors in such applications as rooftop air handlers. This housing also makes it the ideal solution for surface mounting in clean rooms or facilities where water or a cleaning solution is utilized in maintaining plant cleanliness.

Resistance Temperature Detectors (RTD’s) are temperature sensing devices consisting of a wire coil or deposited film of pure metal, usually platinum. The element’s resistance increases with temperature in a known and repeatable manner. RTD’s exhibit excellent accuracy over a wide temperature range. Non standard size can be manufactured on request.

• Type: Speed Controller
• Color: Black, Green
• Voltage: 110vdc, 12vdc, 220vdc
• Frequency: 15hz, 50hz
• Material: ABS, Mild Steel, PVC
• Power: 1-3kw, 3-6kw, 6-9kw
• Power Source: Electric
• Phase: Double Phase, Single Phase, Three Phase
• Warranty: 1year, 2years

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design. All RTD’s are calibrated in our Te

High quality standards in production and storage necessitate a comprehensive monitoring system that delivers measured data reliably. The adaptive RMS Rotronic Monitoring System is the perfect solution for a wide range of applications.

• Feature: Large variety of probes for all applications .
• Resolution: 0.1° C
• Display: 3½ digit, 0.5
• Range: 200° C to 700° C
• Accuracy: 150.0° C to 199.9° C: ±0.6° C , 200° C to 600° C: ± 2° C .

• Features: Exact dimensions,Reliable,Precise

• Type: Thermocouple Sensors
• Material: Plastic, Stainless Steel
• Application: Industrial
• Color: Black, Blue, Red, White
• Feature: Durable, Fine Finished, Good Quality, Light Weight, Rust Proof, Rust Resistance
• Condition: Good, New
• Power: 15w, 20w
• Warranty: 1year, 2years
• Condition: New, Used
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr

Control Technology for Hot Runner Systems: Safe and Comfortable 1, 2, 3, 5-channel temperature controllers DP1, DP2The compact controllers for economical and comfortable control of small hot runner systems. Total connected value 1-phase 230 V 16 A Fuzzy PID control behaviour Set / actual display for each control point Gentle softstart function Pulse group control Power limitation Temperature reduction during production breaks Regulated operation in case of failed thermal probe possible Counter for hours of operation Continual error monitoring   Multi-channel temperature controllers DPT5, DPT10, DPT15, DPT20, DPT45The multiple controllers of the DPT series offer extensive functions for the safe control of complex hot runner systems. Four selectable temperature programs Fuzzy PID control behaviour Gentle softstart function Control-TechnologySet/actual display for each control point Limited power during start-up Start-up ramp for even heating of different heating circuits Phase control and pulse group control Temperature reduction during production breaks possible Regulated operation in case of failed thermal probe possible Diagnostic function for detection of wiring errors Up to 3500 W per control zone Counter for hours of operation Continual error monitoring Connectors of thermocouples and heating elements physically separated Retrofitting of up to 15 control zones is feasible Optional with serial interface for connection of injection moulding machines by ARBURG, ENGEL, KRAUSS-MAFFEI, FEROMATIK, etc.   Multi-channel temperature control cabinet DPT multi zone for operation with multiple tools with a high number of cavities. This new development especially for the operation of multiple tools with a high number of cavities offer a comprehensive range of functions: Expandable from 40 up to 150 control circuits (in steps of 5), the LCD touch-screen display guarantees the simplest operation for highly complex tools. The control is executed by means of a Windows software. Graphic tool display with freely moveable display fields. Full-text error messages. Log files for monitoring errors and status. Possibility of managing two tools separately. Print function for temperature records. Various remote maintenance possibilities via standard PC interfaces.     Controller eValve-4The controller "eValve-4" is able to control up to four bistable electromagnets, which are used for nozzles with needle valve. The electrical lift magnets generate a mechanical lift of 10 mm. The two end position are fixed with permanent magnets. Electric power is only used for changing the position of the magnetic fixed lifting cylinder.

Our Modular Controller series offers a cost effective solution to integrating multi-zone PID control, data acquisition and I/O into your PC, DCS or PLC control system. You can drag and drop controller data to PLC registers in seconds using point-and-click data mapping from an extensive menu of built-in serial and Ethernet drivers. No tedious PLC code to write. Instantly Ethernet-enable your PLC for free! Not only are programming costs slashed, you can eliminate costly add-on I/O and analog cards and solve applications simply using an inexpensive brick PLC. The high-density DIN rail design saves panel space and eliminates cutouts. All modules can be hot-swapped -- the master automatically programs a replaced module.

• Condition: New
• Brand Name: Yudo
• Voltage: 100 to 240 V AC
• Heat Resistance: 100 Degree C
• High Precise Measurement: +- 0.01 Degree C
• Precise Temperature Control: +- 0.018 Degree F
• Tolerance: +- 0.01 Degree C
• Model No.: CW662
• Temperature Range: 0
• Frequency: 50/60 Hz

• Usage/Application: Traffic Signaling
• IP Rating: IP65
• Make: Osho
• Clock: Built-in RTC / GPS
• No. of outputs: 64
• Power Consumption of CPU: 5 W
• Input Power: 5 V DC
• Operating temperature: 0-55 Degree C
• Humidity: 95% AT 40 Degree C (Non Condensing)
• MCU: 8 Bit Micro Controller
• Memory: 128k

The web-based remote control VACUU·CONTROL® enables the monitoring and control of vacuum pumping units via computers or mobile devices such as Smartphones. With the LAN or WLAN adapter all pumping units and vacuum systems equipped with the CVC 3000 vacuum controller or a DCP 3000 vacuum gauge can be integrated into a computer network (Exception: fine vacuum control with CVC 3000 is not supported). In this way it is possible for multiple pumping units to be controlled or monitored from a single PC on the one hand or alternatively an individual pumping unit can be observed from several devices. The vacuum system can be operated fully and simultaneously at any time directly at the pumping unit. With the built-in datalogger function, processes are automatically documented. Notification of the end of the process automatically appears when a selective pressure is reached or after a set time. Performance features Remote monitoring and controlling of pumping units or vacuum systems with CVC 3000 or DCP 3000 through easy integration with computer networks full simultaneous operation via the CVC 3000 / DCP 3000 or by remote control LAN and WLAN-adapter enables the control with fixed or mobile devices (PCs, smartphones, tablets, notebooks,...) available as an add-on for all CVC 3000 and DCP 3000 from software version 2.0 onwards (2009) process documentation via integrated datalogger and notification signal at the end of the process

We manufacture of flame proof temperature indicator .Our domain expertise and ability to render world-class quality products coupled with reliable and efficient customer services are responsible for our step-by-step growth and provide a cutting-edge in this market arena. Display 3 1/2 digit 7 segment Red LED 0.5" ht Cold Junction Compensation Automatic For T/C Sensor Input J, K, R,S T/C, PT-100 RTD, mV, V& 4-20m A Accuracy J, K 1 % R,S 0.5%, PT-100 RTD 0.2%, mV,V,mA, 0.1% Sensor open Indication By '1' at MSD Supply 200 V.AC. + 10% 50 Hz Enclosure Gas group I, IIA, IIB as per IS-2148 / 2147/ IP - 55

For Monitoring and replenishment of any running machinery Sump oil.  Sump High / Low Level Alarm continuously monitored. Filling/replenishment interlocked with a user provided volt-free Run feedback. Alarms are provided for  -Too much consumption due to leakage  or filling too long due to low level in the header tank. Easy installation n serviceability. Applications - for Diesel engines , Turbine gear boxes , Hydraulic cranes , Compressors etc. Contact us for a complete engineered solution.

• FS pressure ranges: 6 000 psi (415 bar) or 10 000 psi (700 bar)

The Model 7350 high pressure pneumatic controller provides a safe, easy to use and effective means of automating high pressure test and calibration of a wide range of pressure measuring devices. In control mode, these controllers simultaneously measure and control pressure, and can be used for the calibration and testing of pressure gauges, transducers, pressure switches and production pressure instruments.

We are engaged in trading of optimum quality Satronic (Honeywell) Sequence Controller for Safe and efficient operation of the burner. These can be offered to our clients in customized specifications as per their varied requirements.   Our range includes the following Oil Burner Sequence Controllers : TF 801, TF 802, TF 804, TF 832, TMO 720 Gas Burner Sequence Controllers : TFI 812, MMI 811/ 812/813, MMG 810/ 811, TMG 740 Flame detectors : FZ 711, MZ 770, IRD, UVZ 780, UVD 970, UVD 971