Process Control Equipment Dealers in Vikhroli East, Mumbai

• Temperature Range: 0 - 300 degree.
• Input supply: 150-270 VAC.
• Details of out put relay: SPDT, Goodsky RWH-SH-112D, Load 1Amp/240VAC.
• Size of the enclosure: 96x96x85, Cut out of panel 92x92.
• Display: 6 digits, size 1/2 x 3/4 inch and 7 segment with red color.
• Temperature sensing probe: PT 100
• Resolution: 1 degree
• Status indication: LED for relay status
• Sensor break protection: Auto switch off on sensor break, "OPEN / SHORT" will be

The TC-10 is an ON /OFF temperature controller with dual display and digital calibration. This instrument has been designed with the latest integrated chip technology which could help to minimize the components of the instruments. So the breakdown rate of the instruments due to component failure has been reduced to zero. The calibration and linearity of the temperature is controlled through software and so the mechanical preset for the temperature calibration has been eliminated. There is no need to calibrate every year as it is guaranteed for at least five years. The calibration cannot be altered by anyone on the site as it is password-protected.

• Accuracy: ±1 Torr
• Min Temperature (° F): 50
• Max Temperature (° F): 104
• Max Vacuum (" Hg): 30
• Process Connection: 3/8" hose barb
• Display: Blue backlit LCD
• Battery Type: 100 to 240 VAC, 50/60 Hz
• Output: RS-232
• Media Compatibility: Air
• Depth (in): 7 1/2
• Height (in): 2 3/4
• Width (in): 5 1/2

• Range: - 50 to 400°C
• Lengths: upto 500 mm
• Protection Tubes (outer dimension): 7, 9, 11 and 12 mm
• Protection Tubes (Other materials available): SS316 and SS316L
• Features: Easy maintenance, Impact and vibration resistant, Leak proof joint, Aluminum head with threaded cap

Sophisticated digital to simple non-indicating controls. Combination controls up to 150 amp capacity. 

The company has gained trust of the clients by manufacturing and supplying the best quality Water Level Controller. Water Level Controller has number of automatic features which set the operator free from operating the pump and save overflowing of water and electricity. Further, the international designing and structure of Water Level Controller is widely appreciated. Working :The water level controller {WLC} first checks underground water in the underground tank to the predefined upper level. Once the predefined upper level is achieved in the underground tank and if the overhead tank is empty (below predefined lower level) then the WLC switches on the pump. Whenever the pump starts, just after a minute the WLC checks the water flow. If the water flow is not achieved then the WLC gives the Dry Run audio visual indication and stops the pump. This saves the pump from dry running and saves electricity. Similarly when the water flow is sensed then the WLC checks the levels of water in the underground tank as well as overhead tank simultaneously. Once the water in the overhead tank fills up to the predefined upper level or the water is pumped below the predefined lower level in the underground tank the pump is switched off automatically. The WLC takes feedbacks from the float sensors and checks the levels of water in the overhead tank as well as the underground tank regularly. Similarly when the overhead tank gets empty, the WLC starts the pump provided there is enough water in the underground tank.Key Specifications : Dimension’s - W: 125mm H: 180mm D: 62mm. Power Supply – 230 Volt AC 50Hz. Power consumption – 6 Watts Advantages of float sensors : Sensor is enclosed in water proof capsule. As no electric supply in water so no electrolysis. Doesn’t require cleaning. Lifelong with free maintenance. High accuracy. Works on low voltage. Less power consumption.  

We offer a wide range of High Temperature Thermocouples. Our range of high temperature thermocouples have the following specifications :    Specifications: Type : 'R', 'S', 'B' Element Size : 0.4, 0.45, 0.5 mm Protection Sheath : Ceramic -KER 710, 610, Inconel 600 Configuration : Simplex / Duplex Special Thermocouple Leaf Type for Surface Measuring Weld Pad Thermocouple Bayonet Type Thermocouple  

Medical gases like Oxygen, Nitrous Oxide, etc. find an important place in the world of health care. Especially, in critical circumstances relating to respiratory treatment for the revival and restoration of human life and also during medical operations for the use of anesthesia. WNCL’s medical gas cylinders are designed to comply with the stringent national and international standards. Special care is taken to maintain a smooth clean internal surface to avoid trapping of contaminants. These cylinders can be supplied with Bullnose or Pin Index type valves. The external surface of these cylinders is treated with good quality enamel/epoxy paint as per relevant Indian Standard or as per the customer’s requirements.

Medical Display Controllers, Healthcare Services

Temperature Control System, temperature control system.

Cooling Controller, Multifunction Meter, MCCB Switches, Solid State Relays

process control instrument, Industrial Burner, level gauge

Medical Display Controllers