Process Control Equipment Dealers in Vikhroli, Mumbai

For Monitoring and replenishment of any running machinery Sump oil.  Sump High / Low Level Alarm continuously monitored. Filling/replenishment interlocked with a user provided volt-free Run feedback. Alarms are provided for  -Too much consumption due to leakage  or filling too long due to low level in the header tank. Easy installation n serviceability. Applications - for Diesel engines , Turbine gear boxes , Hydraulic cranes , Compressors etc. Contact us for a complete engineered solution.

High quality standards in production and storage necessitate a comprehensive monitoring system that delivers measured data reliably. The adaptive RMS Rotronic Monitoring System is the perfect solution for a wide range of applications.

• Temperature Range: 0-300 degree.
• Input supply: 150-270 VAC.
• Details of output relay: SPDT, Goodsky RWH-SH-112D, Contact rating 10A/270VAC, Maximum load 250mA
• Size of the enclosure: 96x96x85, Cut out of panel 92x92..
• Display: 3 digits, size 1/2 x 3/4 inch and 7 segment with red color.
• Temperature sensing probe: PT 100
• Resolution: 1 degree
• Status indication: LED for relay status.
• Sensor break protection: Auto switch off on sensor break,"OPEN / SHORT" will be displayed.

This is a dual set point temperature controller with two output relays and a single PT100 input. Each set point controls its own output relay.It can be configured as a high / low limit, heating / cooling, two stage heating (or cooling) controller or as a heating or cooling controller with alarm. The main advantage of this controller is the calibration which has been done digitally through software. So there is no need to do the calibration every year and the setting cannot be altered as it is protected with a password. Digital display, microprocessor based design, electrical noise-resistance even in a rough industrial environment and user friendly key operations are the main features of this instrument. How to set the temperature The temperature can be set by pressing the  key which will show TP1 on the main display. Press the  key which will show the current set temperature of TP1 and change the parameter through  /  key. Press  key again to save the parameter of TP1 and then TP2 will appear on the main display. The parameter of TP2 can be set by following the instruction as of TP1. After setting TP1 and TP2 the temperature controller can be restarted by using the  key.

• Phase: Single/Three Phase
• Power Source: AC
• Power: 230 VAC at 50 Hz(Supply)
• Temperature: 20 to 80 Degree Celsius
• RH: 10-95%, Non-condensing
• Display: GLCD

Features : Advanced Micro controller based GLCD Alphanumeric Display Support 2 door / 3 Door Entry / Exit Built in Emergency & Can connect to Fire Alarm Station User Programmable Blower On Time (MM:SS format)  Password / Change Password to enter the Menu User Entry From Exit Door (Programmable by user) Built in Real Time Clock User Programmable Blower Timer From exit Door Entry Read feedback from Electromagnetic lock Built in power Contactor & MCB Easy to installation & user friendly wiring Soft touch Membrane keypad Door locked / realised Led Indication on entry Exit panel

we are offering air bubble controller.performance and features: this instrument is install near size ring of plastic extraction machine to easy operating reducing air leakage, reduce size variation even through puncture reducing wastage in production, easy operating saving time.   technical specifications:   operation: - when film get puncture in bubble size will reduce so bubble air controller is automatic on & flow of air is start and stop when actual size is received which we have preset..

• Supply Ability: 20 Piece/Pieces per Month
• Place of Origin: Maharashtra, India
• Port: Nhavasheva
• Packaging Details: Wooden Box

We specialize in offering highly efficient digital bell controller, which is acknowledged for its easy programmability. The digital bell controller basically allows control over the duration of the ringing of the digital bell. This digital bell controller is appreciated for its application in schools and colleges. This digital bell controller enables a clear bell ringing signal while ringing. why our digital bell controller? always rings the bell at right time every timeensures accurate control over bell systemmaintains the real time bell time even during power failurescustom designed and installed as per the specific institution’s requirements

• Material: Metal
• Voltage: 380V, 440V
• Condition: New
• Application: Industrial
• Automatic Grade: Automatic
• Feature: Digital Water Meter Display, Lorawan Compatible, Spiral Water Meter
• Warranty: 2 Years

We have carved repute as a prominent Manufacturer & Supplier of Temperature & Humidity Controllers in Maharashtra, India. We are supported by a group of personnel who make use of the finest material for their production and compiled them in line with industry standards. Owing to our smart network, timely delivery of the placed order is what we always execute. Our Temperature & Humidity Controllers are obtainable at the modest prices!

RTD’s FOR BEARING TEMPERATURE: For bearing temperature measurements choose from various miniature RTD,s right from 2 mm dia x 5 mm length onwards.

We manufacture of flame proof temperature indicator .Our domain expertise and ability to render world-class quality products coupled with reliable and efficient customer services are responsible for our step-by-step growth and provide a cutting-edge in this market arena. Display 3 1/2 digit 7 segment Red LED 0.5" ht Cold Junction Compensation Automatic For T/C Sensor Input J, K, R,S T/C, PT-100 RTD, mV, V& 4-20m A Accuracy J, K 1 % R,S 0.5%, PT-100 RTD 0.2%, mV,V,mA, 0.1% Sensor open Indication By '1' at MSD Supply 200 V.AC. + 10% 50 Hz Enclosure Gas group I, IIA, IIB as per IS-2148 / 2147/ IP - 55

Sophisticated digital to simple non-indicating controls. Combination controls up to 150 amp capacity. 

Control Technology for Hot Runner Systems: Safe and Comfortable 1, 2, 3, 5-channel temperature controllers DP1, DP2The compact controllers for economical and comfortable control of small hot runner systems. Total connected value 1-phase 230 V 16 A Fuzzy PID control behaviour Set / actual display for each control point Gentle softstart function Pulse group control Power limitation Temperature reduction during production breaks Regulated operation in case of failed thermal probe possible Counter for hours of operation Continual error monitoring   Multi-channel temperature controllers DPT5, DPT10, DPT15, DPT20, DPT45The multiple controllers of the DPT series offer extensive functions for the safe control of complex hot runner systems. Four selectable temperature programs Fuzzy PID control behaviour Gentle softstart function Control-TechnologySet/actual display for each control point Limited power during start-up Start-up ramp for even heating of different heating circuits Phase control and pulse group control Temperature reduction during production breaks possible Regulated operation in case of failed thermal probe possible Diagnostic function for detection of wiring errors Up to 3500 W per control zone Counter for hours of operation Continual error monitoring Connectors of thermocouples and heating elements physically separated Retrofitting of up to 15 control zones is feasible Optional with serial interface for connection of injection moulding machines by ARBURG, ENGEL, KRAUSS-MAFFEI, FEROMATIK, etc.   Multi-channel temperature control cabinet DPT multi zone for operation with multiple tools with a high number of cavities. This new development especially for the operation of multiple tools with a high number of cavities offer a comprehensive range of functions: Expandable from 40 up to 150 control circuits (in steps of 5), the LCD touch-screen display guarantees the simplest operation for highly complex tools. The control is executed by means of a Windows software. Graphic tool display with freely moveable display fields. Full-text error messages. Log files for monitoring errors and status. Possibility of managing two tools separately. Print function for temperature records. Various remote maintenance possibilities via standard PC interfaces.     Controller eValve-4The controller "eValve-4" is able to control up to four bistable electromagnets, which are used for nozzles with needle valve. The electrical lift magnets generate a mechanical lift of 10 mm. The two end position are fixed with permanent magnets. Electric power is only used for changing the position of the magnetic fixed lifting cylinder.

Resistance Temperature Detectors (RTD’s) are temperature sensing devices consisting of a wire coil or deposited film of pure metal, usually platinum. The element’s resistance increases with temperature in a known and repeatable manner. RTD’s exhibit excellent accuracy over a wide temperature range. Non standard size can be manufactured on request.

• Feature: Large variety of probes for all applications .
• Resolution: 0.1° C
• Display: 3½ digit, 0.5
• Range: 200° C to 700° C
• Accuracy: 150.0° C to 199.9° C: ±0.6° C , 200° C to 600° C: ± 2° C .

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design.

• Type: Thermocouple Sensors
• Material: Plastic, Stainless Steel
• Application: Industrial
• Color: Black, Blue, Red, White
• Feature: Durable, Fine Finished, Good Quality, Light Weight, Rust Proof, Rust Resistance
• Condition: Good, New
• Power: 15w, 20w
• Warranty: 1year, 2years
• Condition: New, Used
• Alarm Range: 1.5mtr, 1mtr, 2.5mtr, 2mtr

One of the strongest heads on the market with a payload of 50kg (110 lbs), making it suitable for 3D camera rigs Zero backlash, no delay unlike ordinary worm gear drives High resolution drive for smooth operation and crisp responsiveness Quick set-up due to a unique plug & play design and simple Mo-Sys bus cabling system Simple, intuitive touchscreen control Unrivalled ease of adjustment Can be underslung, getting the lens closer to the floor than a geared head. With the slip ring fitted option, the Lambda head is capable of continuous, multi-turn 360 degree rotation in all axes without the worry of cable wraps.

The web-based remote control VACUU·CONTROL® enables the monitoring and control of vacuum pumping units via computers or mobile devices such as Smartphones. With the LAN or WLAN adapter all pumping units and vacuum systems equipped with the CVC 3000 vacuum controller or a DCP 3000 vacuum gauge can be integrated into a computer network (Exception: fine vacuum control with CVC 3000 is not supported). In this way it is possible for multiple pumping units to be controlled or monitored from a single PC on the one hand or alternatively an individual pumping unit can be observed from several devices. The vacuum system can be operated fully and simultaneously at any time directly at the pumping unit. With the built-in datalogger function, processes are automatically documented. Notification of the end of the process automatically appears when a selective pressure is reached or after a set time. Performance features Remote monitoring and controlling of pumping units or vacuum systems with CVC 3000 or DCP 3000 through easy integration with computer networks full simultaneous operation via the CVC 3000 / DCP 3000 or by remote control LAN and WLAN-adapter enables the control with fixed or mobile devices (PCs, smartphones, tablets, notebooks,...) available as an add-on for all CVC 3000 and DCP 3000 from software version 2.0 onwards (2009) process documentation via integrated datalogger and notification signal at the end of the process

• Usage/Application: Traffic Signaling
• IP Rating: IP65
• Make: Osho
• Clock: Built-in RTC / GPS
• No. of outputs: 64
• Power Consumption of CPU: 5 W
• Input Power: 5 V DC
• Operating temperature: 0-55 Degree C
• Humidity: 95% AT 40 Degree C (Non Condensing)
• MCU: 8 Bit Micro Controller
• Memory: 128k