Process Controllers Dealers in Dahisar, Mumbai

• Type: Automatic
• Input Value: 230 Volts AC 50 Hz
• Usage: AT-23, Auto Tension Control, Web Tension, Powder Brake
• Digit Display Size: Single Display
• Output Current: 5 Amps

• Brand Name: PPC
• Driven Type: Electric
• Current Type: AC
• Color: Black
• Condition: New
• Power: 220V
• Application: Industrial
• Size: 72(w)* 72(h)* 110 (d) Mm (cutout- 68*68mm) 48(w)* 96(h)* 110 (d) Mm (cutout- 46*92mm) 96(w)* 96(h)* 110 (d)mm (cutout - 92*92 Mm)
• Model Number: ppc-dtc
• Feature: High Performance
• Voltage: 230
• Display Type: Digital
• Type: Digital Temperature Controller, FE-CON(J) / CR-AL (K) / PT-100 (RTD)
• Weight: .200-400gm
• Theory: Temperature Controller
• Frequency: 50Hz
• Temperature Range: 0-400C
• Resolution: 1
• Accuracy: 1
• Country of Origin: India
• RANGE: 0 -60.0/100/250/400/600/1200 degree centigrade,
• OUTPUT: TIME PROPORTIONAL / ON-OFF - RELAY- 6A/10A ( 1C/O) / SSR
• SETTING: POTENTIOMETRIC SETTING (PUSH TO SET ),
• DISPLAY: 3 ½ DIGIT, 7 SEGMENT DISPLAY,
• POWER SUPPLY: 230 VAC / 50 HZ

Libratherm offers Microcontroller based multiple Ramp Soak programmable PID temperature controller Model PRC-489 which is designed to improve reliability, accuracy and control for all temperature control applications. It features Ramp and Soak functions (the capability to control the temperature and its rate of change over a predetermined time span). Single pattern of total 16 (rampsoak) steps can be programmed and stored in the memory. It can also be used as single set point control when the rampsoak profile control is not desired. Inputs can be Thermocouple, IR Thermocouple, RTD Temperature Sensors, Voltage, Current Signals etc. PRC-489 offers both switching outputs in the form of SSR driverTriac (AC SSR) for external SSR or external load contactor and analog output in the form of (4-20) mA or (0-5) volt control signal, which can be used to control heater power through Thyristor power regulator (for electrical heating system) or to control the position of a modulating motor valve (for oil or gas fired heating systems). The analog outputs can be directly connected to Libratherm make single phase three phase SCR phase angle or zero cross over fired power controller which is ideally suitable for both resistive and inductive heating loads.

• Voltage: 260 VAC
• Feature: With Input & Output Connecting Cable, Automatic Voltage Regulation, Minimum & Maximum setting for Output Voltage
• Brand: Sai Control
• Phase: Single Phase
• Mounting Type: Wall
• Surface treatment: Polished
• Material: Mild Steel
• Usage: Industrial
• Current: 6A
• Frequency: 50/60Hz

Ultra mag series standard’s sanitary batch control system engineered for bulk, precision dosing and filling operations from drums, tote® tanks and kettles – virtually hands-free. This system utilizes a non-invasive full bore magmeter for flow volume measurement. Simply dial in desired volume, press enter, and the sanitary batch control delivers a preset volume of material within .05% accuracy. The system is an excellent solution for conductive food products, pharmaceuticals, and cosmetic materials. Common applications lotions shampoo chocolate pie fillings juice concentrates brine pharmaceuticals tomato paste features 3a certification large graphic display tri-clamp® fittings low shear design non-invasive measurement easy to clean design multi-language display standard or metric units of measure measures volume

• Over Voltage withstand: 36 VDC max.
• Supply voltage: 5 to 33 VDC

LCD Base AMF Controller uses advanced single chip Micro-Controller for an easy and trouble free D.G. set control. It uses Jumbo 16 x 2 LCD display for Read out and memebran keypad for interaction with user for various parameter settings. It has Data logging facility to check every event.

Libratherm̢۪s new ECO - MODEL series 480, 720 & 960 of Digital Temperature Indicator / Controllers available in ABS enclosure are low cost, accurate, rugged and reliable instruments suitable for general purpose temperature measuring and controlling applications. It accepts thermocouple or RTD as the sensing input and provides Relay / Solid State Relay control output for controlling the electrical or fuel fired heating or cooling system. The range covers simple Temperature Indicator, Single and dual set point ON/OFF or Time proportional Controllers. ApplicationFurnace / Oven / Refrigeration control Heat treatment Environmental chambers Plastic / Packaging industry Cold Storage and Chilling plants Laboratory equipment ..etc. Special model available for Infra red heaters.Optionally AvailableModel with dual input and dual set point Model with dual display to indicate PV & SVSimultaneously with single and dual set point control

• Feature: Minimum maintenance, Attractive design, Durable finish standards.

Markoprint X1JET is designed for different range of applications i.E. food & beverage, chemical, coated / uncoated materials, timber and the pharmaceutical industry   EASY TO USE No training necessary: printing with the Markoprint X1JET is simple, due to 3-logic intuitive operation with LED status light. Data transmission is is initialized with USB stick / interface.   UNIVERSAL AND FLEXIBLE USE Markoprint X1JET uses True Type fonts for printing. All conventional 1- and 2-dimensional codes* can be printed. The controller is fully integrated into the print module.   CONTROL Different performing system versions are available, with different functional features, depending on application requirements: Print, Basic, Advanced and Pro. The basic system version allows data transmission via USB stick. Each controllerhas a network connection (LAN) or a standard EIA-232 interface. Print layouts are created with iDesign software.   WIDE RANGE OF STANDARD ACCESSORIES Ein breites Tintensortiment bestehend aus wasser- und solventbasierten Tinten erschließt viele Anwendungen

• Brand Name: West Control Solutions
• Model Name/Number: 6100+ & 8100+ & 4100+
• Enclosure: IP66
• Certifications: CE,UL,ULC,CSA
• Sampling Time: 4 per second,14 bit resolution approximately
• Output Type: Relay,SSd,DC linear V or mA,Triac,24V transmitter power supply
• Product Category: Single Loop Controller
• Dimensions and Size: 48mm x 48mm x 110mm (HxWxD),1/16 DIN; 96mm x 48mm x 100mm,1/8 DIN; 96mm x 96mm x 100mm,1/4 DIN
• Primary Input Type: Universal (TC,RTD,DC linear mA/mV)
• Other Inputs: Digital,Remote setpoint
• Max. Number of Outputs: 3
• Control Type: PID,ON/OFF,Manual,Alarm,Ramp to Setpoint
• Power Supply: 100-240V AC 50-60Hz,20-48V AC 50/60 Hz,22-65V DC
• Communicatons: RS-485 serial (West ASCII or MODBUS)
• Panel Sealing: IEC IP66,NEMA4X

• Frequency: 50/60 Hz
• Display Type: 4 Digit/7 Segment
• Voltage: 110- 230 V AC
• Resolution: 0.1°C.
• Accuracy: ±1°C (-50 – 70°C).
• Mounting Type: Wall
• Control Type: On-Off
• Brand: Selec
• Temperature measuring range: -50 – 99°C.
• Sensor error delay: 1 minute.
• Power supply: 220 VAC±10%, 50/60Hz
• Power consumption: ≤3 W.
• Sensor: NTC sensor (1PC).
• Relay contact capacity: Cool 10A/250VAC;Heat 10A/250VAC.
• Ambient temperature: 0 – 60°C.
• Storage temperature: -30 – 75°C.
• Relative humidity: 20% – 85% (No condensate).
• Front panel size: 75(L) x 34.5(W)(mm)
• Mounting size: 71(L) x 29(W)mm.
• sensor length: 1m (include the probe).
• Product size: 75(L) x 34.5(W) x 85(D)mm.
• Package includes: 1 x 220V Mini Digital Temperature Controller. 1 x Temperature sensor probe with cable. 1 x Instruction Manual.

tension controller, AC Drive > MFDDTB3A2 (5KW), Flexible Packaging

• CAPACITY: 50 - 30,000 Litres.

We provide customized, end to end solutions for liquid oral plants that are fully automated with SCADA controls or semi-automated as required. Our plants are designed with the highest quality of fabrication standards using the best components and instruments. They are also fully optimized for delivering the best performance with reduced life-cycle cost. PROCESS EQUIPMENTS Material handling and transfer Sugar syrup preparation Sugar syrup pre-filtration Solution preparation Solution storage Platform structure Transfer panels CIP Systems Plant automation API mixing                         STORAGE SYSTEMS Raw material storage Inverted sugar storage Liquid glucose storage Glycerine storage           KEY FEATURES, OUR PRODUCTS AND SERVICES Design of process, equipments and transfer piping Transfer systems for sugar through vacuum system Sugar preparation system with jacketed, insulated and cladded vessel with bottom entry propeller mixer for vigorous mixing In-line high shear mixer for suspensions Process vessels rated for vacuum EHEDG / 3A approved twin lobe pumps Electrically heat traced, insulated transfer lines of liquid glucose Back-washable stainless steel sintered filter for filtration Sanitary piping systems with butterfly valves Stainless steel operating platform with staircase and railing 21 CFR Part 11 compliant PLC / SCADA based automation system Automated CIP system Highly experienced team for installation and validation support

• Voltage: 230 V / 110 V
• Brand Name: Siemens
• Humidity: 95 % RH
• Weight: 165 g
• Automation Grade: Automatic
• Usage/Application: Industrial

Digital Temperature Controller

digital photo electric controller, Electric Controller, Power Pack

Digital Temperature Controller, Scanners, YAA Manhole Cover

tension control, Fashion Jewellery, Costume Jewellery

Speed Dome Camera Controller, Burglar Alarm Systems, speed dome

tension control, Video Inspection System, Guiding System, Safety Chucks