Process Controllers Dealers in Goregaon, Mumbai

• Type: Digital Temperature Controller
• Application: Industrial
• Weight: 400-800gm
• Color: Black
• Feature: Auto Controller, High Performance, Stable Performance
• Condition: New
• Display Type: Digital
• Theory: Temperature Controller
• Frequency: 50Hz

setpoint and process both are displayed simultaneously. the process display is 12.5mm height. the setpoint display is 8mm height. the power supply is 90-260 vac. notes 1. on-off control: relay is on upto the set temperature and cuts off at the set point. system temperature will come down and again relay will go on at temperature 2 °c below the set point. same function is repeated. adjustable dead band is provided for specific application. time-proportionating control : relay will be on and off in band of ±2 °c of set-point. on-off : time will adjust as per the heat requirement of the system. of course total time cycle will be of 15 seconds. 2. 4½ digit temperature indicator/controller nippon 2020a. 3. contact factory for supply volts of 90 - 260 vac & retransmission output     principle  :  input signal is signal conditioned, linearised and amplified.  it is compared with the set point and accordingly relay operates.   inputs  :  j,k,r,s,t and other thermocouples, r.t.d's like pt-50, pt-100 (2~3 wire), 0-1vdc, 4-20 ma... etc. range, indicating  : refer table - a accuracy, resolution ambient compensation: automatic  setting  : by push button - coarse/fine pots or by membrane key - trimpot setting accuracy : better than 0.2% output  : relay contacts rated at 230v/6a. control  : on-off or time-proportional (refer note on back side)  sensor open protection: built-in indicates ' 1', relay cuts-off.  ambient temperature:  0-55 °c supply :  230 vac ±10%, 50 hz standard, 90-260 vac on request. box size  :  96 (h) x 96 (w) x 180 (d) or  72 (h) x 72 (w) x 110 (d) or  48 (h) x 48 (w) x 100 (d) in mm note : 24 vdc for loop power 4-20 ma input on re

• Power: 230V AC ± 15%, 50/60 Hz
• Size: 96 x 96 x 110mm, 48 x 96 x 150mm

Digital temperature controller, The Dimension are 96 X 96 X 150mm. Other related products manufactured are Potentiometric type controllers withwithout deviation indicator, Portable and Mains operated temperature indicators.Display : 4.5 Digit, 12.5mm Red Led. Range : 100 0C to 1700 0C in various models Resolution : 0.1 0C or 1 0C Accuracy : Better than 0.25 % ± 1 digit Sensor : Suitable for RTD (pt100), thermocouple (Type J, K, R, S, T), solid state Sensors.

• Brand Name: System Controls
• Temperature Range: 0-400 Deg C for J type Thermocouple Input
• Application: Rubber & Plastic Moulding Machine
• Power: 100 to 240 VAC
• Accuracy: 1% of Full Scale
• Type: Digital
• Size: 96*96 mm
• Weight: 750 gm
• Model Name/Number: DTC-PS
• Display Size: 0.56"
• Control Action: ON/OFF or Proposnal
• Warranty: 1Year

• Size: 96 X 96 Mm
• Temperature Range: -200 DegreeC
• Brand Name: Delta
• Input Type: Thermocouple

Fire-Eye Gas Burner Sequence Controller is designed for automatic startup of gas burners and flame monitoring in Gas fired furnaces and Ovens, Boilers, Flame screens, Flare gas chimneys, Gas fired kitchen equipments etc using flame electrodes for sensing the gas flame based on flame conduction principle. Fire-Eye provides a high voltage to the flame electrode which is immersed in the flame. The current generated by the electrons flow through from flame to ground is detected for the pressure of flame. In case of flame failure during operation, the ignition is switched ON to ignite gas to confirm gas flow.

IRE EYE Gas Burner Sequence Controller Fire-Eye Gas Burner Sequence Controller is designed for automatic startup of gas burners and flame monitoring in Gas fired furnaces and Ovens, Boilers, Flame screens, Flare gas chimneys, Gas fired kitchen equipments etc using flame electrodes for sensing the gas flame based on flame conduction principle. Fire-Eye provides a high voltage to the flame electrode which is immersed in the flame. The current generated by the electrons flow through from flame to ground is detected for the pressure of flame. In case of flame failure during operation, the ignition is switched ON to ignite gas to confirm gas flow. FLAME EYE Oil Burner Sequence Controller Flame-Eye Sequence Controlleris a fully electronic system which enables automatic and safe operation of oil burners. It is a preprogrammed Sequence Controller for the blower, ignition, solenoid valve to ignite the flame along with flame supervision through a photocell. Flame-Eye is must with automatic steam boilers, thermopacks,ovens, dryers, hot air generators, oil burners etc. The Photocell is an L D R encapsulated in as aluminium housing to give a long life trouble free working. UV Controller A flame sensor / supervisor suitable for detection of flame in Oil / Gas / Coal fired burners. Highly sensitive only to UV light emitted by flame and not to any refractory glow or day light. UV controller tube consists of two electrodes sealed in a gas filled quartz envelope. When a voltage is applied across the electrodes and the tube is exposed to UV source like flame, the cathode emits electrons which ionizes the gas in the tube. When the filled gas is ionized the tube becomes conductive and current flows throgh the tube. This says-FLAME ON condition.

NS6 is a 4-channel Digital DJ controller with complete built-in mixer and four decks of software control. NS6 is the first truly pro-grade DJ controller and standalone 4-channel mixer with effects, allowing you to mix external sources with tracks on your computer. Simply put, there has never been this much versatility and control available for professional DJs. NS6's easy-to-use dual-platter system has been designed in collaboration with Serato to deliver powerful breakthrough performance to DJs of all kinds. The NS6 platters are the most responsive, highest-resolution touch-activated platters ever produced in a DJ product, delivering an astounding 3,600 ticks of resolution per rotation. These are not "forced depression" platters that demand you press down every time you want to move the platter or scratch; the NS6 platters are ultra sensitive, responding to your touch, giving you extremely precise, high definition turntable control. With high-resolution 14-bit MIDI communication to your computer, NS6 keeps your mix super tight, erasing the line between hardware and software.   Numark NS6 Features: Built-in 4 Channel DJ Mixer that works with or without the computer Inputs for 4 line, 2 turntables, 2 microphones Serato's Itch 4 Deck DJ software included.

speed controllers, converters, fan regulators, Light Dimmer, Semiconductors

Pressure Indicator : Accepts 4-20mA from pressure transmitter & displays pressure. Pressure Controller : Accepts 4-20mA from pressure transmitter, displays pressure and gives a relay o/p.   Specifications   4 3-1/2" Digit LED Display 4 I/P 4-20 mA 4 Works on 230V AC Mains 4 Generates 24V DC supply 4 Displays pressure upto 1000 bar 4 Single relay or Double relay o/p (Controller Only)  

BERNINI Design (Italy) is leading manufacturer of high-end engine and generating set controllers. BERNINI controllers are used all over the world. In India, these controllers are used for last 12 years by major manufacturers of engine, generating sets & panels and Telecom industries.

Digital Temperature Controller, Digital Counter, Digital Timers

• Feature: Compact design 96x48 cm,2 relay o/p,High accuracy, 0.1% FS,Configurable Span,Optimum performance,Long service life,Easy installation,Approved quality.
• Brand Name: Adarsh
• Place Of Origin: Mumbai
• Display Size: 3-1/2" Digit LED Display I/P 4-20 mA
• Voltage: 230V AC Mains
• Approx Price: Rs 3,000 / Piece(s)
• Supply: Generates 24V DC supply
• Displays pressure: 1000 Bar
• Min. Order Quantity: 10 Piece(s)
• Payment Mode: T/T & Other
• Delivery: 1 week (Min.)

process controllers, power resistors, ultrasonic cleaners

dc motor speed controllers, Automotive Battery Charger, dc ac converters

Digital Temperature Controllers, logic probes, Digital Timers

motion controller, Three Phase CG AC Drive, Servo Motors

pneumatic controller, riveting hammers, Air Staplers, Solenoid Valve

Variable Speed PMDC Motor Drive Cum Controller

process controllers, ac variable frequency inverters, ups systems

process control instruction, Process Scanner, industrial printer

led traffic signal controller, LED Pedestrian Signal Light