Processing Plant Dealers in Naigaon East, Mumbai

The machine has a stainless steel body, and the lid is made of high quality acrylic material. This lid is capable of opening widely that enables easy loading of products into the machinery.

Air swept type, screenless, recommended for minerals, ores, dyestuff, chemicals, clays etc. Not recommended for wet or sticky material.The Pulverizer consists of a machined body bolted together inside which rotate forged steel hard faced balanced hammers mounted on a solid alloy steel shafting. The shaft rotates in self aligning ball bearings installed in C.I. housings provided with grease cups. Replaceable C.I. breakers plate are fitted on to the main body which acts as the stator and facilitates Pulverizing.

One can contact us for obtaining enduring and sturdy built Mixer Grinder! We are a renowned Supplier of Mixer Grinder from Maharashtra, India. We have close and good associations with the prestigious manufacturers and bring to you a wide array of Mixer Grinder that is impeccable on counts of quality, performance and longevity. As far as the cost is concerned, it is provided by us at market-leading prices.

Ideal For Gradation and Separation Of Dry Powder, Granules And Semi Solids/Liquids. Models 20″, 30″, 36″, and 48″ Modular Design Of Decks With Easily Fitted Clamps Suitable For Widest Range Of Material Less Power Consumption, Variable Flow Pattern Dust Free Arrangement, Lead Free Sieves Easy Dismantling And Cleaning Output 80 to 200 Kgs/hr Depend Upon Characteristic Of Material M.O.C.S.S. 304/316/316L Rubber Molded Sieve As Optional

KERONE along with its dedicated team of process equipments machinery manufacturing and design team and technically equipped manufacturing facilities has helped in succeeding in providing the high quality and technically advanced process equipments for the various need of the CIP/SIP Systems Plant. CIP (Clean-in-Place) systems offers the arrangement for cleaning/sterilizing the interior surfaces of vessels, equipment, filters, pipes and fittings, without disassembling them. SIP(Steam-In-Place) Systems are liable for frequently steaming parts of product contact, vessels, flow paths, and sample ports. The CIP/SIP systems together helps in maintaining the desired level of hygiene, by continuously killing the germs.

• Material: Metal
• Shape: Vertical
• Certification: ISI Certified
• Color: Metallic
• Capacity: 5000-10000L
• Surface Finishing: Coated
• Constructional Feature: Completely Integrated, Fireproof Certified
• Size: 20 ltrs to 20000 ltrs
• MOC: SS 316 & SS 316L

Online parameters Completely automated process cycle Online PH conductivity,TOC sensing Single to multitank system

• Standard: IS:6901
• gas: Oxygen, Hydrogen, Nitrogen, Argon, Acetylene & CO2
• Product Category: Industrial Regulators
• Suitable:  for Brazing, Heating, Welding, Beverage Plants, Research Lab, Purging, Etc Applications
• Stages: Double
• Model No: NSS-GPR-2220
• Capacity Withstand: 1 And 1/2 Times Full Cylinder Pressure
• Gauges: Double
• Material:  forged Brass 
• Media: Gas

• Driven Type: Steam
• Color: Light White
• Condition: New
• Automatic Grade: Automatic, Fully Automatic, Semi Automatic
• Power: 5-7kw
• Voltage: 220V, 380V
• Type: Sweet Making Machine
• Weight: 100-500kg
• Country of Origin: India
• Warrenty: 1year
• Material: Stainless Steel
• Feature: Kaju katli paste cooking
• Machine Body Material: SS
• Usage/Application: Food Industry

• Usage: Labs
• Type: Automatic
• Voltage: 440 V
• Power: 5-10 Kw
• Warranty: 1 Year
• Certification: CE Certified

CIP is commonly used for cleaning bioreactors, fermenters, mix vessels, and other equipment used in biotech manufacturing, pharmaceutical manufacturing and food and beverage manufacturing. CIP is performed to remove or obliterate previous Cell Culture batch components. It is used to remove in-process residues, control bioburden, and reduce endotoxin levels within processing equipment and systems. Residue removal is accomplished during CIP with a combination of heat, chemical action, and turbulent flow.   The Code of Federal Regulations states “Equipment and utensils shall be cleaned, maintained, and sanitized at appropriate intervals to prevent malfunctions or contamination that would alter the safety, identity, strength, quality or purity of the drug product beyond the official or other established requirements.”[1]   Repeatable, reliable, and effective cleaning is of the utmost importance in a manufacturing facility. Cleaning procedures are validated to demonstrate that they are effective, reproducible, and under control. In order to adequately clean processing equipment, the equipment must be designed with smooth stainless steel surfaces and interconnecting piping that has cleanable joints. The chemical properties of the cleaning agents must properly interact with the chemical and physical properties of the residues being removed. A typical CIP cycle consists of many steps which often include (in order): Pre-rinse with WFI (water for injection) or PW (purified water) which is performed to wet the interior surface of the tank and remove residue. It also provides a non-chemical pressure test of the CIP flow path. Caustic solution single pass flush through the vessel to drain. Caustic is the main cleaning solution. Caustic solution re-circulation through the vessel. Intermediate WFI or PW rinse Acid solution wash – used to remove mineral precipitates and protein residues. Final rinse with WFI or PW – rinses to flush out residual cleaning agents. Final air blow – used to remove moisture remaining after CIP cycle.   Critical parameters must be met and remain within the specification for the duration of the cycle. If the specification is not reached or maintained, cleaning will not be ensured and will have to be repeated. Critical parameters include temperature, flow rate/supply pressure, chemical concentration, chemical contact time, and final rinse conductivity (which shows that all cleaning chemicals have been removed).

As, our organization has stringent quality management strategies, our complete range of products is preferred by many across the industry. Clients can select any payment mode from our online or offline methods. Both of them are secure, hassle free, and ensure the fastest trade with the customers.Details : MOC SS 304 / 316 / 316L. We can Manufacture as per customer design / requirement. Electric heating also possible for smaller capacity. Top mounting stirrer / homogenizer also available. PLC based Fully automatic plant also available. cGMP with documentation

We are offering automatic liquid process plant. Bullet moc ss 304 316 316l. Bullet we can manufacture as per customer design requirement. Bullet electric heating also possible for smaller capacity. Bullet top mounting stirrer homogenizer also available. Bullet plc based fully automatic plant also available. Bullet cgmp with documentation

• Country of Origin: India
• Material: Stainless Steel
• Voltage: 220V
• Technique: Welded Mesh
• Wire Diameter: 1-5mm
• Wire Gauge: 1-5mm

Impact Pulverizer is suitable for grinding of Minerals, Clays, Limestone, Neeru, Dolomite, Coal, Bauxite, Baryten, Gypsum, China Clay, Soap Stone, Calcite, Bentonite, Calcined bone, Carbon Black, Felspur, Kaolin, Talc, Mica Chips, Asbestos, Leather chips, Baisan, Gram Dal, etc etc.

Additional Applications:* Kaju processing for kaju katari / Roll* Ghee processing * Badam katri manufacturing* Soan papdi manufacturing* Khoa Processing etc.1. Steam jacketed vessel having all contact parts of ss-304 (8% Nickel)2. Our Machine shall Incorporate Fitting like ARV, SRV, Product outlet valve, strainer, steantrap, pressure gauge etc.3. High quality ceramic insulation with SS 304 cover.4. The machine is fitted with geared motor, PTFE lined stirrer,5. Special tilting arrangement provided for removing processed material. 

• Brand Name: Auto Controls
• Warranty: 1 Year
• Machine Body Material: S.S 304
• Design Type: Customized
• Material: S.S 304
• Usage: Boiling Milk,Mava machine
• Color: Steel
• Usage/Application: Milk

• Country of Origin: Made in India
• Condition: New
• Screw Size: 250 mm
• Motor Power: 110 kW
• Capacity: 1600 kg/hr
• Screw Speed: 45 RPM

• Display Type: Analog
• Material: Mild Steel
• Country of Origin: Made in India
• Brand: Tipco
• Measuring Range: 0-16 kg/cm2
• Accuracy: +/-2 %
• Temperature: -40 to 65 Degree C

Useful as a common CIP system for non movable equipments which cannot be moved to cleaning area like Blenders, RMG, Fluid dryers mixing tanks, storage tanks, etc. which do not have their own dedicated CIP arrangement.

Vibro Sifter Machine, Pest Kettle, MULTIMILL, Tablet Coating Pan Machine

Food Processing Plants, bombay tiffin carriers, stainless steel houseware

Vacuum Gauges, Differential Pressure Gauges, differential pressure switches

Sesame Seeds, Indian Tea

Mixer Grinder, 750 Watt Mixer Grinders, Leader Mixer Grinder

milking machine parts, oil lubricated vacuum pumps, Dust Collectors

Mango Pulp Processing Plant, Fruit Mill And Crusher

Mixer Grinder

sifter machines, Capsule Filling Machine, multi mil machine

processing plant, Writing Instruments, pharmaceutical filling machine

cashew nut processing plant, Processed Cashew Nuts