Protective Bellow Dealers in Marol, Mumbai

t_Eqp__Ind_Fan2_2 Laxmi Engineering core competencies lie in its design and application engineering capabilities catering to specific requirements of its clients. Laxmi Engineering proven commitment to quality and service is manifested in the high satisfaction levels expressed by its clientele over the decades.

These are used for exhaust gases, pneumatic coneying, room pressurisation, material handling recirculation, dust collection and gases exhaust. Types : These fans are available in different types. Limit Load Fan 1. Single inlet single width 2. Double inlet double width 3. Material wheel type 4. Paddle wheel.

We are offering ptfe bellows. Ptfe is resistant to virtually all chemicals, even at very high temperatures and pressures. It is only affected under certain conditions by elementary fluorine, strong fluorinating agents like and molten alkali metals.

• Country of Origin: India
• Type: Air Blowers
• Weight: 0-10kg
• Voltage: 220V
• Automatic Grade: Automatic
• Driven Type: Electric
• Presssure: High Pressure
• Brand Name: MPT

5 SPEED VARIABLE BLOWER  

• Brand Name: FIBROTECHNIKS
• CAPACITY:: 500 CFM to 50000 CFM

We are offering low pressure blower. we design low pressure blowers as per client's requirement. We manufacture and supply complete unit after testing. our impellers are dynamically balanced as per is standards. Impellers are fabricated in pp or frp. impellers are fabricated in clockwise and anti-clockwise directions as per the client's requirements. pressure : 2” wc to 25” wc types of blowers are as follows : vee belt drive direct drive coupling drive.

• Wind Volume:: 2.3m/min
• Input Power:: 1080W
• Voltage: : 110v/220v
• Frequency:: 50/60Hz
• No Load Speed: : 16000r/min
• Size/Qty:: 53*48*44cm
• Net Wight : : 17.46 Kg

• Country of Origin: Made in India
• Size: 3/4
• Material: Stainless Steel
• Application: Pressure and Temperature Sensors, Altitude measuring in aerospace

• Country of Origin: India
• Type: Centrifugal Blowers
• Application: Air Cooling, Air Gas Handing, Air Ventilation
• Weight: 0-10kg
• Color: Black
• Voltage: 110V, 220V, 240V, 380V, 440V
• Power: 1-3kw
• Driven Type: Electric
• Warranty: 1year
• Codition: New
• Presssure: Low Pressure
• Product Name: Axial Fans and Centrifugal Blowers
• Size: Diam : From 133 to 350 mm

• Type: Air Blowers
• Color: Blue
• Voltage: 240V, 440V
• Condition: New
• Driven Type: Electric
• Presssure: High Pressure, Low Pressure, Medium Pressure

We are specialized in Blower Manufacturer. In Mild Steel , Stainless Steel and Galvanised material.   As per rquirement.

We are Offering Barbecuing with Hot Air Blower. Igniting charcoal with chemicals of any kind is a laborious process, not particularly healthy and often highly dangerous. Any hot air gun does the job safely in just a few minutes with no effect on taste. Crusts baked on barbecue grills can be scraped off with ease after heating with hot air gun. http://www.hotairgun-heattool.com/hotairgun-barbecue-grills.php#barbeque

We are one of the successful centrifugal air blowers manufacturers. These centrifugal air blowers are corrosion resistant, having high impact strength and are easy to machine. They are manufactured using thoroughly checked, peak quality rigid PVC/Polypropylene + FRP. We provide these high working capacity multistage centrifugal blowers in variety of sizes; ranging from 500 cfm to 10000 cfm. These centrifugal blowers are user friendly and highly cost effective in operation. They are mostly used in laboratory, fume cupboards, pickling plants, electroplating industries, reaction vessels, and process rooms for corrosive, hazardous fumes removals & scrubbers. Striving at providing a prolific deal to our customers we provide these high quality centrifugal blowers on very nominal rates.

• Type: Electrical
• Color: Blue
• MOQ: As per client requirement
• Quality: Superior

With us, one can stay assured for safe deliveries as we make use of premium material for packaging the lot. Also, we make sure that the material is sourced from the trusted places only. Based in Mumbai(India), we have gained wide appreciation owing to our high quality products and client-centric approach.

We complete the requirement of Induced Draft Fan that is used in various chemical, pharmaceutical and many more industries and research organization for flowing air as to maintain the temperature of production room.

High Temperature Glass Fabric Expanssion Bellows APPLICATIONS Automotive Power Generation Petrochemicals Fluid Power Instrumentation Chemicals & Fertilizer Plants Electronics Filtration Pharmaceuticals Hydraulic Fittings Hydraulic Cylinders Pneumatic Cylinders Valves and Pumps Plumbing Products Dairy/Food Processing Earthmoving & Construction Equipment

Our organization has gained vast expertise in offering a superior range of PTFE (Poly tetra fluoro ethylene) Coating on SS (Stainless Steel) Bellows that are manufactured with superior quality stainless steel materials that are procured from reputed vendors across the globe with zero defects.

This turbine blower is a non-positive displacement, high volume, pressure, blower that can operate as either a compressor or a vaccum pump. It is also known as other names such as regenerative blower, vortex blower and side channel blower. All of the names describe the basic principle of operation of the blower.

• Color: Silver
• Voltage: 220 V
• Country of Origin: Made in India
• Power Source: Electricity
• Brand: CTK
• Material: Stainless Steel
• Automation Grade: Automatic
• Frequency: 50 Hz

We are offers Rubber Bellow (AR RB 03)that we offer is fabricated using superior quality raw materials and is high on demand in the market. our array of rubber bellow finds application in various industrial areas and is widely appreciated by the clients all across the country. besides, this rubber bellow can be availed at the cost-effective prices.

Ex-pansion Bellows are formed with a thickness up to 50 mm with a size ranging from 300 mm ID to 5200 mm ID.Some of the distinct job sizes are enlisted below : 1940 mm OD x 1442 mm ID x 32 mm Thk – SA 516 Gr. 70 Material 1136 mm OD x 616 mm ID x 32 mm Thk – SA 516 Gr. 70 Material 1306 mm OD x 886 mm ID x 28 mm Thk – SA 516 Gr. 70 Material Application: Pressure Vessels Heat Exchanger Scope of Work: Manufacturing on Job work basis (FIM) Cold/Hot forming by progressive pressing OR Single stroke Die- punch Heat Treatments (Intermediate/Final Stage) Edge Beveling

• Rated Power: 1 HP TO 25 HP
• Features: Easy to operate,Less power consumption,Safe to use
• Body Material: FRP
• Voltage (Volt): 230V
• Frequency (Hz): 50-60 Hz

• Impeller Diam.: 190 to 225 mm
• Input Voltage: 110, 220, 440 V AC (50 & 60 Hz.)

These Fans use Backward Curved Impellers made of Steel or Engineering Plastics. The impellers are press fitted on the External Rotor Motor and dynamically Balanced in two planes. Backward Curved Fans can be used with or without scroll Housing, and find its application in sucking operations, and where static required at Fan Inlet is high.

pullman industrial fans, blowers & exhausters, owing to their high efficiency and good workmanship, are widely used by various industries like chemicals, fertilizers, pharmaceutical, plastic, food processing, steel, mining, textile, engineering, research laboratories, hospitals and hotels, wood-working unit, cement plants epic. these are available in different materials of constructions such as ms, ss and aluminum etc. Depending upon the working conditions: and are classified and are recommended on the basis of the applications, following are the types of pullman fans, blowers & exhausters. pullman centrifugal high pressure blowers applications : these are extensively used and are most suitable for pneumatic conveying systems, flotation systems, liquid agitation,air slide fans for cement plants and numerous process applications requiring high pressures as well as for delivering air blast to furnaces, boilers etc.range: capacity up to 50,000 cmh. And pressure up to 1,500-mm. W.g.construction: constructional features are similar to those of blowers and exhausters but however, the impeller is of backward curved design which is suitable for developing high pressure. pullman centrifugal medium pressure blowers applications: used for fume extraction, dust collection, pneumatic & material conveying and in various process applications.range: capacity up to 1,00,000 cmh. & pressure up to 500-mm w.g.construction:. Supplied in only (sisw) & are fabricated in heavy gauge steel sheets with adequate framing of ms angles, drilled flanges are incorporated at inlet & outlet.the impeller, depending on the type of use, could be of backward inclined or radial design, statically & dynamically balanced for minimizing vibrations, drive arrangements in which blowers & exhausters are supplied are direct drive, direct drive through coupling or v-belt drive to suit specific requirements. pullman centrifugal low pressure blowers applications: these are suitable for industrial ventilation requiring high volumetric flow rates at low pressures.range : capacity up to 5,00,000 cmh. And pressure up to 150-mm w.g.construction: fans are available either in single inlet single width ( sisw) or double inlet ( didw) type ~ fabricated in mild steel sheets and stiffened by means of ms angles, at inlet & outlet drilled flanges are incorporated for easy connection of the fan to the system. the impeller is of backward inclined design, statically and dynamically balanced and mounted on the shaft by means of cast iron hub. Drive arrangement could be direct or through v-belts depending on a specific requirement.

• Minimum Order Quantity: 500 Pieces
• Production Capacity: 10000 Pieces
• Delivery Time: 15 days

Assisted by the team of our professionals, we are engaged in offering a quality range of Rubber Bellows, which can be molded, expanded and collapsed. Owing to this flexibility, these bellows help in protecting the component from the foreign particles. Manufactured using high grade raw material, which is procured from the certified vendors of the market, these gear-lever bellows are widely used in applications related to commercial vehicles. Available in different shapes, lengths and sizes, our clients can avail these bellows as per their own specific requirements. Due to their capacity to withstand considerable heat and wall thickness, these bellows are better than any other common bellows available in the market.  Other Information

• Pressure ratings for sizes: 1" to 3" is 6kg/cm2 and full vacuum.

Anyone can insert the location ring to bring the bellow in center. this way the life of bellow increases and unnecessary ruptures can be avoided. Our deep knowledge in mechanical seal has helped us to evolve this design.We design bellows in Teflon and SS-316 for mechanical seal and we have learnt the things hard way.

Expansion Bellows are formed with a thickness up to 50mm with a size ranging from 300mm ID to 5200mm ID. Some of the distinct job sizes are enlisted below : •  1940mm OD x 1442mm ID x 32mm Thk – SA 516 Gr. 70 Material •  1136mm OD x 616mm ID x 32mm Thk – SA 516 Gr. 70 Material •  1306mm OD x 886mm ID x 28mm Thk – SA 516 Gr. 70 Material Application •  Pressure Vessels •  Heat Exchanger Scope of Work •  Manufacturing on Job work basis (FIM) •  Cold/Hot forming by progressive pressing OR Single stroke Die- punch •  Heat Treatments (Intermediate/Final Stage) •  Edge Beveling •  NDT (after forming) : DPT, RT, MPI, UT

With the assistance of our capacious warehouse, we are able to meet the bulk as well as urgent requirements of the buyers. Our unit is supervised by the experts ensuring complete safety of the lot. Based is Mumbai(India), we are entrusted with the chore of providing top-notch products in the domestic market.

• Features: Long service life, Accurate dimensions, Sturdy construction
• Continuous rating Input: 500W
• No load speed (rpm): 8,500-16,000
• Air volume: 1.3-2.4m³/min
• Dimensions (L x W x H): 428x163x212mm (16-7/8"x6-3/8"x8-3/8")
• Net Weight: 1.3kg (2.8lbs)

• Feature: Silencer ensures low noise, Practically nil maintenance cost etc.

These blowers consist of a dynamically balanced impeller, which revolves in as stator-cum compression chamber having very fine clearances between them. The impeller is fitted directly on to the motor. Both the suction and pressure openings are located on the outer periphery of the stator to reduce impedence to the air flow thereby developing vacuum and pressure.

Alfa's Centrifugal blowers are designed to provide directional airflow by maximising static pressure , making them optimal for spot cooling and airflow through any ducting system . It is one of the most suitable choice for helping in to distribute air flow in areas where its difficult  to supply fresh air at constant rate.