PTFE Valve Dealers in Mumbai

Diaphragms are sealing agents, used as moveable membranes to prevent two or more components from leakage and friction. The flexible nature of this seal allows pressure effects to cross the barrier but not the material being contained. We can manufacture rubber diaphragms which are bonded with Brass, mild-steel or stainless-steel studs. We also manufacture diaphragms that are Metal Inserted, Gasketed, Teflon laminated or that are reinforced with fabric, nylon, canvas, wire mesh, etc. Applications: Electrical & Pneumatic Control valves, Pressure regulators, Saunders Valves, Solenoids valves, High Pressure Pumps, Actuators, Gas regulators, Angle Valves, Brine Filter Valves, Dust Collectors, Spray Pumps, etc

• Type: PTFE seated butterfly valve
• Pressure: PN10
• Size : 40-600 mm/ 1�"-24"
• Body : CI (Nylon/ epoxy coated)/ DI/ WCB/ CF8M
• Disc: CF8M (PFA/ PTFE Lined)
• Seat : PTFE/ PFA with elastomer back up
• Stem: 17-4-PH SS ASTM A564 Type630/ CF8M (Integral with disc)
• Stem: ASTM A182 SS304/ SS316
• Operation: Lever/ gearbox/ pneumatic/ electric actuator
• Temperature : (-)25�C  to (+)200�C

We are occupied in offering an extensive range of PTFE Lined Diaphragm Valve. We are offering Diaphragm Valves to our clients. We are well-known as one of the prestigious organization in providing a wide range of valves.

• Material: Carbon Steeel, Cast Iron, Stainless Steel
• Certification: ISO 9001:2008 Certified
• Condition: New
• Pressure: Medium Pressure
• Application: Oil Fitting, Water Fitting, vacuum, water, oil, steam, chemical
• Size: 1.1/2inch, 2inch, 1.1/2" to 12"
• Feature: Investment Casting

We have hired experienced quality auditors who stringently check the raw materials against varied quality parameters before procurement. Thus, we ensure quality products at buyer's end. Catering to the ever-evolving packaging requirements of the clients, we make certain that our professionals use only the finest packaging material to circumvent loss during transit.

Features :  One piece integral Ball Stem combination  No backlash in stem and ball even after prolonged service  Extraordinary strength due to metallic body and Ball core design  Exceptionally low torque as compared to plug valve  Self adjusting packing for maintenance free spindle sealing  Bubble tight shut off same as standard ball valve

• Material: PTFE
• Color: White, Red
• Connection type: F/M
• Handle Type: Lever

We are main supplier of this product.

• Material: High grade raw materials
• Feature: Resistant to any corrosion attack,Low maintenance,Sturdy construction,User friendly
• Brand Name: AWRS
• Condition: Good
• Product Name: Ptfe Lined Butterfly
• Place Of Origin: Mumbai

We provide PTFE Lined Butterfly Valve, which is regarded as a highly reliable product in the market. The superior quality of our PTFE Lined Butterfly Valve has earned us bulk orders. Our PTFE FEP Lined Valves are specially designed to encounter the corrosion attack, which other conventional Valves face. The use of high grade raw materials ensures the quality as well as the durability of our PTFE Lined Butterfly Valves. The wide network coupled with efficient supply has lent us a foremost name amidst the principal PTFE Butterfly Valve Exporters from India. Features Resistant to any corrosion attackLow maintenanceSturdy constructionUser friendly

• Nominal Diameter: 2″- 12″(DN50

Our teflon lined butterfly valve offers a light weight, lower cost, heavy duty, and maintenance free solution to high pressure applications. Common applications that use butterfly valves include: utilities, pulp and paper, oil and gas production, fuel handling systems, marine, petrochemical processing, air conditioning, and refrigeration. Our teflon lined butterfly valve also comes in many sizes and styles, including lug-style body, wafer-style body, and pressure classes 150, PN 6, PN 10 & PN 16. This teflon lined butterfly valve can also provide dead end service where applicable.

• Size: 50 mm - 300 mm
• Body Type: Split Body
• Pressure Rating: PN10
• MOC: Carbon Steel & Stainless Steel

We are amidst the known Manufacturers, Exporters and Suppliers of superior quality Two Piece PTFE PFA Lined Concentric Butterfly Valves. We source good quality raw materials to manufacture our Two Piece PTFE PFA Lined Concentric Butterfly Valves. Our Two Piece PTFE PFA Lined Concentric Butterfly Valves are tested on various parameters by our quality checking team members. Our Two Piece PTFE PFA Lined Concentric Butterfly Valve is known for its reliability and high performance. Features It has an anti-blowout shaft provisionIt has integral body locating holes to ease the installation and to ensure perfect centering of the valve between flangesPrimary shaft sealing by preloaded contact between disc and liner hubThe elastomer back-up pads behind the liner ensure a tight fit around the disc, giving a bubble tight shut-off at minimum operating torqueOne of the most important features of the NeoTecha Butterfly valve is the stem seal. The pressure to keep the two sealing surfacestogether is provided by an upper and lower set of Cup & Cone Packing resulting in a superior stem sealThe liner provides a wide flange-sealing surfaceThe liner and disc are the only two valve parts in contact with the mediumSecondary shaft seal by oversizing the shaft diameter in relation to the shaft hole in the linerThe liner and disc are molded and machined to close tolerances to provide : Low torqueLess stress and deformation during opening and closingAn integrated part of the primary and secondary sealing in the shaft areaElimination of tearing and bunchingOptional TFM lining is available for extremely demanding applicationsActuator flange and stem dimensions acc. ISO 5211 Minimum Order Quantity : 2 Units Material Shell : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless SteelTrim : WCB, CF8, CF8M, CF3, CF3M, CF8C, CN7M, CD4MCu, Hastelloy, Inconel, Duplex Stainless Steel Range Size Range : 2" - 72" Class : PN 6/PN 10/PN 16/Class 150 Types : End Connection - Flanged / Lug / WaferOperation : Lever, Gear Operator, Electrical Actuator, Pneumatic, Hydraulic

Features PTFE diaphragm is manufactured by PTFE suspension resin with high strength and tenacity. Different specifications can be made by methods of molding, skiving and finalizing the design. It can also be adhered to rubber and metal with one side etched. PTFE diaphragm is made by high-strength, good toughness fluorine resin....) Used in metri pumps, diaphragm pumps, and diaphragm valves2) All sizes are available according to customers' requirement3) High chemical properties, acid and alkali resistant 4) Wide working temperature range5) Self lubricating6) Nonstick7) Not aging

The Richter product range of corrosion-resistant shut-off, safety, sampling and check valves, sight glasses as well as control equipment for control and shut-off functions is virtually complete.Diaphragm shut-off and control valves, PFAPTFE-lined.

ptfe lined diaphragm valves found wide application in Chemical as well as pharmaceutical Industries. Fluoropolymers are inert to almost major acids and alkalis and gives longer working life.

• temperatures: -50°C to +240°C
• range: 15NB to 100NB.

Lined Ball Valves are widely used throughout harsh chemical, oil & gas, and pharmaceutical factories and plants. The full port design minimized pressure and enhances flow capacity. INSEAL lined valves are specially designed to be resistant to the most aggressive chemicals. The thickness of the lining is calculated to ensure total protection against corrosive chemicals. The valves is designed to withstand temperatures from -50°C to +240°C and is specially lined with an anti-adhesive, self lubricating material with good resistance to abrasion and shocks. Standard sizes range from 15NB to 100NB. Inseal International is a manufacturer, supplier and exporter of high quality PTFEPFA lined ball valves.

PTFE COATINGS has got good non-stick, self-lubricating, heat resistant and chemical fume resistance. The coefficient of friction is extremely low (the lowest of all the fluoropolymers).} PTFE coatings are FDA compliant for direct food contact uses. Operating temperatures are generally - 100°C To + 260°C. Other Characteristics include good abrasion resistance and Non-wetting. PTFE coating application thicknesses can range from 25 microns to 50 microns.

MOC : IS 210 GR FG 200 / 220 and lined with Teflon / FEP / PFA / P.V.D.F. Size : 25mm to 150mm  

• Material: PTFE
• Color: Blue
• Country of Origin: Made in India
• Brand: Aaa Industries
• Packaging Type: Box

• Operating temperatures: - 100°C To + 260°C.

The coefficient of friction is extremely low (the lowest of all the fluoropolymers). The coefficient of friction is extremely low (the lowest of all the fluoropolymers). Other Characteristics include good abrasion resistance and Non-wetting.

Plug Valve is lined non corrosive polymer and can resist any type of chemicals at various temperatures. It is available from 25 mm NB to 150 mm NB. Valves are virtually unaffected by changes in processing temperature or chemical concentration. In-fully-line valve, the fluorocarbon lining is locked into the valve body.

• Color: White
• Media: Water, Air, Oil
• Condition: New
• Model: Teflon

• DUCTILE & PFA LINED: DUCTILE & PFA LINED

A specially patented Ball Valve having TeflonPFA lining directly moulded on all surfaces having contact with the fluid. The thickness of the lining is calculated to ensure total protection against highly corrosive chemicals for long service life.Unlike conventional Ball Valves the ball assembly consists of one solid piece without any looseness so that there is no deterioration of lining in the area of Ball Stem Selding. The thickness of the lining is absolutely constant throughout to avoid any deformation of the ball.

These valves are available in special designs, which ensure smooth operations in every application. The robust construction of our Rubber Lined Butterfly Valve makes it a favored choice among the customers. 

• Operator: Lever, Wrench, Pneumatic
• Size: 1/2 "-24 "
• Pressure Rating Class: 150# 900#

• Size: 2”to 16”

Wafer type slim body butterfly valve with actuator Slim design is tailor made having provisions for mounting holes on Butterfly-valve Body itself matching mounting dimensions as per requirement. Valve and actuators are designed and manufactured as per GMP norms.

150 Class American 4000 series Teflon coated ball Valve.Ci body- Di taflon coated ball - Price $ 50/pc.( 2")- 10" ( $1500)

• Features: Corrosion resistance,High strength,Low maintenance

We are offering Teflon Lined Valves.

EBRO Armaturen PTFE Line Lug Control Valve, Pneumatic Operated Ball Valves

PTFE Lined Valves, Ptfe Fittings