Rotary Pumps Dealers in Fort, Mumbai

• Motor Horse Power: 0.05hp to 25hp
• Power Source: Diesel
• Discharge Pressure: Upto 200 PSI
• Flow Rate: Upto 5000 LPM
• Uses: Used for handling viscous liquid
• Feature: Can Be Coupled to Electric Motor or Diesel Engine

UniBoost Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe  contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox. Rotary pumps can handle solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure, too, so output is constant and continuous. Rotary pumps also offer superior CIP/SIP performance. Once in line, they can be cleaned without being removed. Depending on the application, it is a good idea to check with the manufacturer to make sure if a particular lobe pump meets both 3-A requirements.   Features :   > Hygenic Construction > Easy – clean Pump’s head in place > Rotor shaft sealed by hygienic mechanical seals or by packed glands selected for the duty conditions. > Reversible flow without modification. > Pass medium solids. > Positive suction, nonpulsating discharge.

  UniBoost Lobe pumps are similar to external gear pumps in operation in that fluid flows around the interior of the casing. Unlike external gear pumps, however, the lobes do not make contact. Lobe  contact is prevented by external timing gears located in the gearbox. Pump shaft support bearings are located in the gearbox. Rotary pumps can handle solids (e.g., cherries and olives), slurries, pastes, and a variety of liquids. If wetted, they offer self-priming performance. A gentle pumping action minimizes product degradation. They also offer continuous and intermittent reversible flows and can operate dry for brief periods of time. Flow is relatively independent of changes in process pressure, too, so output is constant and continuous. Rotary pumps also offer superior CIP/SIP performance. Once in line, they can be cleaned without being removed. Depending on the application, it is a good idea to check with the manufacturer to make sure if a particular lobe pump meets both 3-A requirements.

With low specific density, self-lubricating properties and without any effect in hot or cold liquids, carbon vanes find application in dry and wet running rotary pumps, compressors and vane-type vaccum pumps. These are ideally suited for rotary pumps handling water, petrol, fuel oils and other liquids.

external rotary gear pumps, Chemical Process Pumps, Diesel Engine Pump Sets

C. Bole & Co. offers wide range of Positive displacement Rotary Gear Pumps for handling oil and other semi viscous liquids. Pumps will find applications for furnace oils. Fuel Oils, molasses, paints and pigments, castor oils, gasoline, inks, Gums, sizing liquids, molten liquids, glue, polymers, cooking oils, glucose, sizing starch, colour feeding, tar, bitumen, thermic fluid, cryogenic liquid transfer, soap stocks / solutions, Acid Slurries, caustic lye, turpentine, varnish and other industrial applications. Pumps can be also used in applications like pressure feeding of fuel in Burners, Circulation of lube oils in gearboxes, turbines, fluid couplings, compressors, diesel engines etc. Pumps can be supplied in Stainless Steel 316, Gun Metal, Bronze construction with Heating/ Cooling Jackets. Pump can be supplied with special mechanical seal which prevents leakage near shaft end. Pump body made of 2 piece type i.e. only one joint in the body which reduces maintenance cost. It has easily replaceable bushes with positive lubrication arrangements. It has proved more efficient due to suction and delivery in the line with Rotors. For handling all kinds of oil and non corrosive viscous liquids, pumps are supplied in CIMS construction. For viscous corrosive liquids and chemicals, pumps can be supplied in Stainless Steel, Gun Metal or Bronze construction. With helical gears for smooth as well as efficient running and built-in relief valve for dependable and trouble free pumping of viscous liquids.

Rotary vane pumps are traditional vacuum pumps, which can be used in a wide area including research and production. The WH series rotary vane pumps are ChemVak's standard vacuum pumps, which can be used individually or as a backing pump in combination with molecular pumps or diffusion pumps in order to create an extremely high vacuum. They are widely used in vacuum distillation, vacuum filtration, vacuum testing, vacuum freeze drying, vacuum plating, leak detection, vacuum packaging, vacuum sorption, and the like. Product Features? Compact structure and very good sealing. Even after shut-off there is no returning throughput? Oil spout prevention? Low noise? Small casing? Easy to transport? High flow rate, which quickly leads to a stable ultimate vacuum? High evaporation resistance? Comparatively high chemical resistance? High longevity and very low maintenance rate? Low oil mist? Oil-observation window for convenient oil inspection? Gas ballast valve, which enables the user to let out a certain amount of gas? Fuse for overcurrent protection? Fulfills IP54 standards

rotary piston pumps, vacuum boosters, liquid ring pumps

Rotary High Vacuum Pumps, Oil Sealed Belt driven,Air cooled, mounted on base plate with belt guard. Fitted with superior quality electric motor 220 volts A.C. single phase

rotary piston pumps, vacuum boosters, liquid ring pumps

Rotary Gear Pump, Emergency Fluorescent Tube Light

Rapidflo Rotary Fuel Transfer Pump, Vijay Hand Operated Grease Pump

Rotary Gear Pumps and Motor Pump Assemblies, dual line lubricating systems