R. K. Engg. Works Private Limited Goregaon, Mumbai, Maharashtra

PP / FRP centrifugal fan light metal performance parameters using polypropylene sheets, heating die welded together. Its widely used in scientific research, the chemical industry, metallurgy, electronics, pharmaceuticals, textiles, instruments, electroplating, mines, schools hotels, guesthouses, laboratories, environmental protection, and other ancillary equipment industry for ventilation exclude acidity, and other harmful gases ventilation in . Do not allow transmission of aromatic compounds, aliphatic and aromatic hydrocarbons halogen derivatives, ketones, and other corrosive gases. With corrosion-resistant chemical, it is not easy aging, the proportion of small, small mechanical vibration, low noise, smooth transfer characteristics. It does not allow transmission of gas containing viscous substances contained in dust and rigid particles ≤ 150 mg/m3, ≤ 50 ℃ gas temperature, relative humidity ≤ 100%. And avoid sun exposure, fans are prohibited in the vicinity of heat. 

PP FRP centrifugal fan light metal performance parameters using polypropylene sheets, heating die welded together. Its widely used in scientific research, the chemical industry, metallurgy, electronics, pharmaceuticals, textiles, instruments, electroplating, mines, schools hotels, guesthouses, laboratories, environmental protection, and other ancillary equipment industry for ventilation exclude acidity, and other harmful gases ventilation in . Do not allow transmission of aromatic compounds, aliphatic and aromatic hydrocarbons halogen derivatives, ketones, and other corrosive gases. With corrosion-resistant chemical, it is not easy aging, the proportion of small, small mechanical vibration, low noise, smooth transfer characteristics. It does not allow transmission of gas containing viscous substances contained in dust and rigid particles ≤ 150 mgm3, ≤ 50 ℃ gas temperature, relative humidity ≤ 100%. And avoid sun exposure, fans are prohibited in the vicinity of heat.

We manufacture single inlet single width (SISW) low & medium pressure blower fan. High efficiency (up to 82%) allowing to reach high savings in the consumption of electricity, Low noise. For a fan the source of noise is mainly the air turbulence created by the impeller. This series fan has been created to obtain the lowest noise thank to the aerodynamic profile of the inlet cone and of the static and dynamic balancing of the impeller. Suitable for the exhaust of clean or slightly dusty air for the various application of the ventilation, air-conditioning and processes industry.   • Volume: from 1000 m3/h up to 1,00,000 m3/h• Pressure: from 20 mm wgp up to 400 mm wgp. • Temperature: up to 350º C• Driven arrangement - Direct / V-belt / Coupling drive.• Construction : M.S / S. S./ Aluminum  

We provide our clients with a range of precision engineered inline fans that cater to the needs of both domestic and commercial sector. Our range of inline fans are manufactured using premium grade of metals and are highly flexible and durable. These fans are incorporated with quiet and efficient airfoil impeller that is capable of developing significant pressure. The in-line configuration of these fans simplifies installation. We also offer these fans as per the customized designs provided by the clients.R.K. Engg. inline fan, centrifugal duct fans are the ideal air movers for residential, commercial and industrial applications. The quiet and efficient airfoil impeller is capable of developing significant pressure, and the in-line configuration simplifies installation. The unique motor design, combined with high quality materials and workmanship, results in a truly versatile fan.

Application : Industrial, Commercial

Power : Up to 100 hp

Voltage : 220 V

This series are suitable for sever and difficult application and for the various industrial applications where a complete reliability of the product is necessary. Application sectors are pneumatic transportation, chemical industries, silos, metallurgic industries & combustion application. Provided with direct or belt driven electrical motor with a fixed rotation speed. It main quality is the robustness. All the mechanical part and element of the this series have been studied and assembled in order to avoid any vibration Suitable for the supply / exhaust of air where is required small air volume with high pressure.    • Volume: from 300 m3/h up to 50000 m3/h • Pressure: from 150 mm wgp up to 1500 mm wgp • Temperature: up to 90º C and up to 400º C with shaft cooler and hollow shaft • Drive arrangement : Direct / V-belt / Coupling drive • Construction : M.S. / S. S./ Aluminum

The unit is built for rigorous industrial use, captures pollution "at source" - filters and returns the valuable heated air to the workshop. R.K. MOBILE fume extraction units are easily wheeled to any factory location where fume extraction is needed. Units are available with mechanical filtration elements.   The mobile units arm/hood assembly, either one or two can be fitted, are completely flexible, self-supporting and easily positioned. 2m, 3m and 4m lengths are available. Units can be built for any electrical voltage.Nominal airflow range is from 300 m3/hr up to 6000 m3/hr and Motor rating from 0.35kw to 5.5kw .

R.K.Engg motorized impeller is a motor cooling fan, superbly crafted, external rotor motor cooling fan, precision balanced air-moving package that features superior performance and compact design. It is ideally suited to applications where space is limited.The unique coupling of the motor and impeller minimizes space requirements and provides for vibration free operation. By combining the efficiency of a impeller with the advanced technology of an external rotor motor, new standards for air performance and sound levels have been achieved.  Suitable for either supply or exhaust applications, motorized impeller is the quietest and most efficient fan package available.  Types :- Cross flow fan, Axial flow fan , Forward / Backward curve    Benefits & Features • 100% speed controllable external rotor motors  • Super quiet BC aluminum / galvanize impellers • Highly efficient backward / forward curved design • Available in 220 / 440 volts  • Compact design, superior performance  • Rugged construction, ball bearing motors  • Capacities: 100 cfm to 3000 cfm  Applications • Electronic cabinet cooling• Clean room modules• Heat exchangers• Air filtration• Military HRAC• Medical appliances• Plastic extrusion• Fume hoods• Pharmaceutical equipment• Semiconductor industries 

In industries today dust is best a nuisance and at worst a real health hazard in certain cases prolonged exposure and lack of control can prove to be fatal. R.K.Engg. are specialists in the field of industrial dust control. No matter how large or small your dust control problem, we can provide the correct solution-quickly, effectively and economically. 

High efficiency (up to 82%) allowing to reach high savings in the consumption of electricity, Low noise. For a fan the source of noise is mainly the air turbulence created by the impeller. This series fan has been created to obtain the lowest noise thank to the aerodynamic profile of the inlet cone and of the static and dynamic balancing of the impeller.Suitable for the supply air for the various applications of the ventilation, air-conditioning and processes industry.   • Volume: from 1000 m3/h up to 1,00,000 m3/h• Pressure: from 20 mm wgp up to 400 mm wgp.• Temperature: up to 350º C• Driven arrangement - Direct / V-belt / Coupling drive.• Construction : M.S / S. S./ Aluminum

We are manufacturer of direct driven axial fans, belt driven axial fans. All the components and materials used in construction and assembly are of the highest quality to ensure many years of reliable operation. Axial fans are suitable for large quantities of air at low pressures while producing very little noise. Compared with centrifugal fans the axial fans have the following advantages   • Lower Price. • Reduced space requirements. • Shorter ducts, thus lowering the cost of the system. • Mounting arrangement Wall / Duct / Panel • Flanges type round / square

R. K. ENGG. centrifugal fans are suitable for the exhaust of clean air, lightly dusty. Low, medium and high pressure simple and double inlet, models with various volume flow for the different necessities. Backward impellers at high efficiency with flat, wing and sirocco profile. Indicated for the various application of the ventilation, air-conditioning and processes industry.   · Wheel sizes from 310 mm up to 2000 mm· Volume flow from 100 m3/h up to 200000 m3/h· Pressure up to 1800 mm wgp.

Brand Name : R. K. Engg. Works

Cabinet fans are particularly designed for air extraction, filtration systems and air conditioning plants where it is necessary low noise emission. They are suitable for civil and industrial applications. The low noise level is due to the acoustic material that cover the ventilator. Above fan Suited to ventilate and convey clean air up to a maximum temperature of 60ºC. The low noise level and the medium pressure head make them ideal for ventilation plants with limited space like offices, shops, industrial and residential installations.    • Volume flow from 100 m3/h up to 6000 m3/h • Pressure from 10 mm wgp up to 80 mm wgp. • Temperature: up to 250º C • Driven arrangement – Direct, V-belt drive • Construction : M.S / S. S./ Aluminum / Galvanize

Bifurcated fans are direct driven axial fans where the motor is encased in a metal box to isolate it from the airflow. This makes bifurcated fans ideal for exhausting or recirculating fumes, gases and hot air up to temperatures of 200°C in standard form or 300°C for our high temperature bifurcated range. The motor must have access to ambient air. The fans have non-overloading characteristics. R.K.Engg. manufacture two types of bifurcated fan, spun bifurcated and fabricated bifurcated. The type of bifurcated fan refers to the process used in it's manufacture, this does not affect the fan design or performance but determines the sizes available and the materials from which the fan can be manufactured.

r.k. Engg. Introduce a new line of air curtains with an elegant modern design that offers an optimum combination of low noise level, sufficient air flow and minimal turbulence.   r.k.engg. Air curtain are specially designed to prevent the loss of cool air and the entry of hot contaminated air. The products can be used to meet a number of requirements :* to prevent warm air infiltration in cold shops and doorless reach in refrigerated cases.* to keep out fumes,dust and insects, maintaining a clean environment. r.k.engg. Air curtains features : * corrosion-proof casting in hot dip galvanized, powder coated sheet steel* compact design to allow for easy positioning* easy installation with cord and plug attached. technical data * available sizes from 3 ft to 6 ft. * volume flow from 10 to 18 m/sec for different models.* effected up to 12 feet height door.