R R International Malad West, Mumbai, Maharashtra

Country of Origin : India

Sanding Stars are the ideal tools for sanding  very contoured or profiled wood or metal parts. The Sanding Stars are made from a very flexible cloth-backed material making them perfect for finish sanding. One can Sand contoured and flat surfaces, raised panels, mouldings, turnings or carvings with these industrial abrasivesanding stars. "Denibbing" raised grain is possible without destroying the intricate features of a work piece. Four, 4" diameter cloth backed, aluminum oxide stars are securely mounted on a 1/4" shaft for use in your drill or die grinder. Max. operating speed is 3200 RPM

Rubber wheels are made of rubber with softness to suit both Grinding and Polishing applications. Designed with scientific principle, which enables it to expand during rotation. Rubber wheels are made as per the size of the circumference of the wheels. These belts can be easily mounted on the wheel. No sooner the wheel starts rotating it expands and grips the belt securely. As the wheel stops rotating, the grip on the belt is loosened. The belt can be easily replaced. The belt grinds and polishes without deep scratches, helping to achieve final polish result. The belts wear evenly and cut smoothly. The wheels are available in two types, single piece and serration type.     Belts are available in Butt Joint in Aloxide and Silicon carbide Grits: 36, 60, 80,100,120,150,180, 220, 320, 400, 600, 800,1000 Zircon available in Grit size: 36,60,80,120 Wheels are available in the following size:1) 125 x 25 mm 2) 125 x 40 mm 3) 150 x 25 mm 4) 150x 50 mm 5) 200 x 25 mm 6) 200 x 40 mm 7) 200 x 50 mm 8) 200 x 31.75 mm 9) 100 x 50 mm

Non Woven Abrasives are made from a three dimensional open structure of NYLON Fibers impregnated with abrasive grains held together by resin to form a loose webbing. Non Woven Abrasives are available in various forms such as Rolls, Hand Pads, Belts & Wheels. Non Woven Abrasives are designed to provide the operator with a controlled & sustained stock removal and finish. As the Nylon fibers of the products wear away, fresh abrasive grains are continuously exposed, providing a consistent finish. The spring like construction of Non Woven Abrasive greatly reduces the risk of gouging & under cutting of the work piece.   Non Woven Abrasive Wheels are designed for use with air & electric hand tool as well as small bench grinder. Non Woven Abrasive materials interleaved with flaps of coated abrasive provide a resilient backing that eliminates the layover effect encountered with conventional abrasives flap wheel. Interleaved flap wheels generate a deep uniformed scratch pattern, which is significantly more aggressive than non-interleaved variety of wheel. Non Woven Abrasive belts are used for surface conditioning. These belts have a woven fabric embedded in the Nylon structure to provide additional strength & durability for edge work, deburring & efficient blending of metals.   APPLICATIONS: Deburring: Removing exit burrs, weld splatters, die cast flash & parting lines. Blending: Mill & Tools marks & uneven edges. Cleaning: Corrosion, Paints, Coatings & Rust. MATERIALS: Aluminium Oxide, Silicon Carbide (Black)   SIZE: Rolls in size of 6”x25mtrs. Hand pads in size of 6”x9”. Belts are available in width of 2” to 6”. Length as per specification. Wheels are available from a minimum of 25mm diameter to as per specification. GRIT: Coarse, Medium, Fine, Very Fine.

Size : Wheels Are Available From A Minimum Of 25mm Diameter To As Per Specification.

Grit : Coarse, Medium, Fine, Very Fine.

Flap wheel is a versatile, high performing abrasive tool designed for grinding, deburring, cleaning & polishing of small diameter tubing, concave & convex surfaces, channel & recessed areas on a variety of surfaces.

Flap Wheel is a versatile, high performing abrasive tool designed for grinding, deburring, cleaning & polishing of small diameter tubing, concave & convex surfaces, channel & recessed areas on a variety of surfaces. Flap Wheels are made of flaps of Coated Abrasive. These flaps are reinforced at the center with a strong flexible resilient adhesive. The Salient feature of the Flap Wheel is that it is non-loading and non dulling because of the unique nature of flaps wearing away evenly in use. These provide consistent finish in uniform rate of cut.

Application : Finishing of sheet metal components, automobile / two wheeler / bicycle parts, etc.

Size : 75, 100, 150, 200, 250, 300mm in Diameter & 25, 50, 75mm Width.

Easy Loc Discs are available in coated abrasives and in Surface Conditioning (SCF) material. Coated abrasive EasyLoc disc is available in variety of material alox, zircon . SCF provides a unique combination of aggressive performance, long life and improved finish. Aluminum Oxide Abrasive with a tough scrim reinforced backing can replace products such as steel wool, wire brushes and conventional coated abrasives to give a consistent repeatable finish. Available in coarse, medium and very fine     TYPICAL APPLICATIONS INCLUDE:Deburring-Grindline Conditioning- Cleaning / Paint & Coating Removal-

Sanders Discs are dependable, conformable and highly productive grinding tool. Our Resin Sander Discs meets the exacting and varied metal working requirements of Automobile, Engineering and Fabrication industries.Aluminium Oxide grain is coated on a tough, durable and flexible vulcanized fiber by a special Electrostatic Coating Technique which ensures perfect grain orientation for high material removal and optimum space between grains for effective chip clearance. Specially formulated resin incorporated with grinding aids gives free and collar cut.This feature gives our Resin Sander Discs that extra cut ensuring higher performance.

Sleeves or Spiral Bands are spirally wound single ply of coated abrasive used on expanding rubber drums. The unique construction of sleeves provides smooth, chatter-free operation, thereby giving the operator greater control of the tool. Sleeves are ideal for grinding, blending, deburring, smoothing, finishing & polishing a wide variety of flat & contoured metal surfaces including the inside of holes & other hard-to-reach areas. Sleeves are also effective on hardware with contours or intricate shapes.

Sleeves or Spiral Bands are spirally wound single ply of coated abrasive used on expanding rubber drums. The unique construction of sleeves provides smooth, chatter-free operation, thereby giving the operator greater control of the tool. Sleeves are ideal for grinding, blending, deburring, smoothing, finishing & polishing a wide variety of flat & contoured metal surfaces including the inside of holes & other hard-to-reach areas. Sleeves are also effective on hardware with contours or intricate shapes.

abrasive belts or sanding belts are available in aluminium oxide or silicon carbide. the unique bond system used in the electro-coating of these abrasives belts ensures that the belts withstand severe applications. sanding belts are extensively used in various industries for operations ranging from heavy stock removal to fine finishing. applications: stainless steel utensils, surgical instruments, shoe industry, plywood, glass grinding, watch strap, textiles, etc. coating: open & closed structure bond: resin over resin & resin/glue/resin.

Type : Abrasive Belts

Material : Abrasive

Country of Origin : India