Rajguru Electronics Lamington Road, Mumbai, Maharashtra

Wavecom Gsm / Gprs modem Q2303A with serial interface. Features of WAVECOM Module -   Designed for global market, WAVECOM is a Tri-band GSM/GPRS engine Works on frequencies EGSM 900 MHz, DCS 1800 MHz and PCS 1800 MHz. WAVECOM features GPRS multi-slot class 10/ class 8 (optional) and supports the GPRS coding schemes CS-1, CS-2, CS-3 and CS-4.With a tiny configuration of 40mm x 33mm x 2.85mm , Feautures of GSM Kit This GSM modem is a highly flexible plug and play quad band GSM modem Supports features like Voice, Data/Fax, SMS,GPRS and integrated TCP/IP stack. Control via AT commands(GSM 07.07,07.05 and enhanced AT commands) Use AC – DC Power Adaptor with following ratings · DC Voltage : 12V /1A Current Consumption in normal operation 250mA, can rise up to 1Amp while transmission. Package Contains: Wavecom Gsm Modem Antenna 12v Adaptor Serial Cable

Audio Output : 3.5 mm stereo jack

Power : regulated 5V (DC-Plug: 1.35mm inner x 3.5mm outer diameter)

USB To Serial Convertor This is a simple to use USB to Serial Converter. It outputs RS232 level signals on the TX and the RX line. Unlike the cheap converters available in the market, which rarely work, if at all, this converter is highly reliable and can be used on all major operating systems, computers and laptops. This converter is USB powered and needs no external power. It can provide the USB port's 5V power supply to an external circuit.You can also get TTL level RX and TX signals from the header pins on the board. The board has standard 3 mm mounting holes for easy mounting.When connected to USB port this converter sets up a virtual serial port which can be used and interfaced just like any normal serial port. You can use this board with all our development boards to do serial communication through USB. You can also program our development boards, which support serial bootloading, through USB using this converter. This USB to Serial converter uses the popular CP2102 IC from Silicon Labs for the USB conversion. This board can be used on all major operating systems.USB To Serial Convertor This is a simple to use USB to Serial Converter. It outputs RS232 level signals on the TX and the RX line. Unlike the cheap converters available in the market, which rarely work, if at all, this converter is highly reliable and can be used on all major operating systems, computers and laptops. This converter is USB powered and needs no external power. It can provide the USB port's 5V power supply to an external circuit.You can also get TTL level RX and TX signals from the header pins on the board. The board has standard 3 mm mounting holes for easy mounting.When connected to USB port this converter sets up a virtual serial port which can be used and interfaced just like any normal serial port. You can use this board with all our development boards to do serial communication through USB. You can also program our development boards, which support serial bootloading, through USB using this converter. This USB to Serial converter uses the popular CP2102 IC from Silicon Labs for the USB conversion. This board can be used on all major operating systems.

Specifications USB MiniB Cable We are engaged in providing a USB MiniB Cable having a USB type A to mini B 5-pin. It is a very common A to mini-B type connector which is commonly found with USB Hubs, Cameras, MP3 players, etc. these are provided in both White and Black colors which may vary as per the rotation of the stock.   Features:   5-Pin (One ID Pin), 0.8mm Pitch, Super Mini Connector Three Versions (Mini-A, Mini-B, Mini-C) To Meet Future Industry Requirements Fully Compliant With Current USB Specifications Smaller And Lighter Than Existing USB Connectors For Portable And Hand-Held Devices Higher Speed Requirements Of USB 2.0alpina.org.

USB Cable A to B We are one of the leading providers of  USB Cable A to B having a Standard of USB 2.0 cables. The USB cable provided by our organization is the most commonly used A to B Male/Male type peripheral cable which can be provided in both White or Black color and may vary as our stock rotates.   Some of the combinations mentioned below:   USB Series A plug to Micro USB USB Series A plug to Mini USB A type Male USB Series A plug to Mini USB B type male USB series A plug to series B plug USB series A plug on both side USB series A plug to 5P housing USB receptacle on bracket

Frequency : 40kHz ±1.0kHz

Ultrasonic Distance Sensor Our offered Ultrasonic Distance Sensor comes with an ASCII serial O/P and provided optimum ranging & detection of long to short distance ranges. Owing to their stable, precise, non-contact and accurate distance measurements from about 2 cm to 4 meters, these sensors have gain wide prominence in the market. Compactly designed, easy usable, high ranging and easily interfaced upon micro controllers RX pin, our product is highly suitable for mapping and distance measurement. At the distance of every 50 ms sensor transmits an ultrasonic burst and send out ASCII value of distance that is equal to the time required for the burst echo to be return to the sensor. Ultrasonic distance sensors are perfect for any number of applications that need the measurement between stationary and moving objects. Besides robotics applications, this product is also useful in security systems or as an infrared replacement. Owing to their optimum stability these ultrasonic distance sensor modules can be used for micro mouse application instead of IR sensors.   Features of Ultrasonic Distance Sensor are as follows :    Professional EMI / RFI Complaint PCB Layout Design for Noise Reduction  Range: 2 cm to 4 m Accurate and Stable range data  Data loss in Error zone eliminated  Modulation at 40 KHz  Mounting holes provided on the circuit board  Automatically Triggered at every 50 ms  5V DC Supply voltage  Current -

UART To Wi Fi Module We are one of the leading suppliers and traders of  UART To Wi Fi Module.Our range of product-line is a complete ultra low power embedded TCP/IP solution. These are manufactured using high-grade raw materials and are procured from trusted vendors and are provided after in-depth research regarding the market trends and clients demands.   Following are the main functions of the product-line offered by our organization:   Support for UART data serial, four baud rate options: 19200 / 38400 / 57600 / 115200bps. Wireless data rates support the 802.11b Standard, the maximum rate is 11Mbps. Integrate the functions of 802.11 MAC protocol Softwares. Support for the STA appliances in the Infrastructure Network. Support for the Open/WEP mode authentication. Support for the wep64/wep128/ccmp/wpi data encryption transmission in the shared key mode Support for the automatic networking mode and manual networking mode. In the automatic networking modethe module can automatically scan the target network, and automatically connect when disconnection. In the manual networking modeoperation of connect and disconnect is touched off by orderthis supports a flexible control space. Support the network data transmission in RAW/UDP/TCP format. Support seven groups of the basic parameters set,and can connect to seven target networks the most. Support to Con fig. the parameters through user serial. Support to upgrade the fire-ware on line by the Internet.

Uart to Ethernet to wifi module This module is a low cost embedded UART-ETH- WIFI Module (Serial port -Ethernet- wireless network) developed by Rajguru electronics.This product is an embedded module based on the Universal serial interface network standard, built in TCP/IP protocol Stack. enabling the user serial port, Ethernet, Wireless Network (WiFi), interface between the conversions.Through the module, the traditional serial devices do not need change any configuration; data can be transmitted through the internet network. Provide a quick solution for the user's devices to transfer data via ethernet.

Specifications UART To Ethernet Module We are one of the leading service providers and traders of  UART To Ethernet Module. Our products are widely known and appreciated among our clients as these are procured from the trusted vendors and ensures high-grade quality of products. Our products are made after stringent quality tests and are availed without any compromises with the quality.   Following are Details of the products:   It is an integrated serial to Ethernet module. It has power supply, rj-45 and db9/m,etc. It is easier to use. SupportsTCP server,TCP client and UDP 10baset/100basetx auto negotiation Support auto mdi/mdix Support UDP multi-casting Support dhcp (dynamic host configuration protocol). Acquire dynamic ip and other network parameters from dhcp server UART data format can be configured. UART baud rata is from 1200bps to 230400bps UART interface supports 5v (or 3. 3v) TTL (CMOS), rs-232c and rs-485 Rs-485 re/DE control output. Support rs-485 interface Operation state output. M cu may check the signal to inspect module operation Network parameters preserved in non-volatile memory. No need configuration after power on every time Support configuration through UART and network DC 5. 0v (3. 3v) power supply. Power consumption ≤ 180ma Module has UART TTL rs-232 (rs-485) converter. Rs-232c (rs-485) via db9 output.

HM-T FSK Transmitter Module HM-T series FSK receiver module is specially designed for replacing those applications that used ASK technology module already. It used together with HM-R series FSK transmission module. Due to the benefits from FSK technology, the module is robust to interference, and longer working distance can be achieved. Features: Highly integrated, small size High sensitivity, low power consumption Fsk technology, suitable for replacing ask modules Less interfrence, longer working distance Can be used to replace ask module W/O the need of software change No tuning required during production

Tilt Sensor Module Features: 1. On-board LM393 voltage comparetor chip and photoactivity sensing probe. 2. Support 5V/3.3V voltage input. 3. On-board signal output instructions, output the effictive signal is low lever, at the same time indicator light off; output signal can directly connect with the microcontroller IO. 4. The sensitivity of the signal detection can be adjusted. 5. Reserve a line voltage to compare circuit (P3 has been leaded out). 6. PCB size: 30(mm) x15(mm).

We are the main supplier of this product.

Type : Thermal Printers

Shape : Rectangular

Application : Printing

Condition : New

Power Source : Electric

Feature : Compact Design, Durable, Easy To Carry, Easy To Use, Fast Printing, Light Weight, Low Power Consumption, Stable Performance

Warranty : 1year, 2years

Type : Sim Card Holder

Material : Plastic, PVC

Shape : Rectengular, Square

Application : Sim Card Holder

Packaging Type : Paper Box, Plastic Box, Plastic Pouch, Velvet Box, Wooden Box

Type : Servo Motors

Voltage : 110V, 220V

Condition : New, Used

Power Type : AC, DC

Driven Type : Electric

Feature : Auto Controller, Dipped In Epoxy Resin, Durable, High Performance, Stable Performance

Phase : Double Phase, Single Phase

Warranty : 1Year, 2Years

Serial Cable M/F Item code: RS232 We are engaged in supplying and trading a Serial Cable M/F which can be connected to any development board. These can be used to interface any of the computers with a standardized Serial port RS232 for any of the clients boards. The color and shape of the cable may vary as the stock rotates.   Features:   Male to Female Wired straight through 1.5 Meters in length

Type : Sensors

Material : Plastic

Application : Automobile Use, Industrial Use

Color : White, Grey

Condition : New, Used

Warranty : 1year, 2years

Ring Sensor The Ring Sensor enables intuitive scrolling and menu navigation functionality for consumer electronic devices in an easy to integrate, high resolution, ultra low-power package. It is ideal for media players, mobile phones, control panels, medical instruments, and home entertainment devices to control streaming media, audio, balance, menus, play lists and gaming functions that involve rotation and steering. The sensor can be integrated directly into the device's host processor without the need for a dedicated microprocessor. "Wake on touch" functionality allows for low power consumption for battery-powered devices. Various actuator materials, including metallic, can be used to create unique design aesthetics

Specifications Raspberry Pi - Model B Description: Who wants pi? The Raspberry Pi has made quite a splash since it was first announced. The credit-card sized computer is capable of many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video. It can run several flavors of Linux and is being used to teach kids all over the world how to program... Oh yeah, and it does all that for under $50. The secret sauce that makes this computer so small and powerful is the Broadcom BCM2835, a System-on-Chip that contains an ARM1176JZFS with floating point, running at 700Mhz, and a Videocore 4 GPU. The GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode and is capable of 1Gpixel/s, 1.5Gtexel/s or 24 GFLOPs of general purpose compute. What's that all mean? It means that if you plug the Raspberry Pi into your HDTV, you could watch BluRay quality video, using H.264 at 40MBits/s. But wait, there's more. The Model B also has a 10/100 Ethernet port so you can surf the web (or serve web pages) from right there on the Pi. The system volume lives on an SD card, so it's easy to prepare, run and debug several different operating systems on the same hardware. Most Linux distributions for the Pi will happily live on a 2GB SD card but larger cards are supported. The Model B's two built-in USB ports provide enough connectivity for a mouse and keyboard, but if you want to add more you can use a USB hub. It is recommended that you use a powered hub so as not to overtax the on-board voltage regulator. Powering the Raspberry Pi is easy, just plug any USB power supply into the micro-USB port. There's no power button so the Pi will begin to boot as soon as power is applied, to turn it off simply remove power. On top of all that, the low-level peripherals on the Pi make it great for hardware hacking. The 0.1" spaced GPIO header on the Pi gives you access to 8 GPIO, UART, I2C, SPI as well as 3.3 and 5V sources. Mating ribbon cables can be found in the related products below. Dimensions: 85.60mm x 56mm x 21mm Features: Broadcom BCM2835 SoC 700 MHz ARM1176JZF-S core CPU Broadcom VideoCore IV GPU 512 MB RAM 2 x USB2.0 Ports Video Out via Composite (PAL and NTSC), HDMI or Raw LCD (DSI) Audio Out via 3.5mm Jack or Audio over HDMI Storage: SD/MMC/SDIO 10/100 Ethernet (RJ45) Low-Level Peripherals: 8 x GPIO UART I2C bus SPI bus with two chip selects +3.3V +5V Ground Power Requirements: 5V @ 700 mA via MicroUSB or GPIO Header Supports Debian GNU/Linux, Fedora, Arch Linux, RISC OS and More!

Raspberry Pi - Model A The Raspberry Pi Model A is here! This is the ideal model for anyone on a budget but still wants a piece of the Pi. The credit-card sized computer is capable of many of the things that your desktop PC does, like spreadsheets, word-processing and games. It also plays high-definition video. It can run several flavors of Linux and is being used to teach kids all over the world how to program... Oh yeah, and it does all that for under $40. Though the Model A lacks half the RAM of the Model B, a USB2.0, and the 10/100 Ethernet USB adapter, the price should definitely make up for it.  The secret sauce that makes this computer so small and powerful is the Broadcom BCM2835, a System-on-Chip that contains an ARM1176JZFS with floating point, running at 700Mhz, and a Videocore 4 GPU. The GPU provides Open GL ES 2.0, hardware-accelerated OpenVG, and 1080p30 H.264 high-profile decode and is capable of 1Gpixel/s, 1.5Gtexel/s or 24 GFLOPs of general purpose compute. What's that all mean? It means that if you plug the Raspberry Pi into your HDTV, you could watch BluRay quality video, using H.264 at 40MBits/s. The system volume lives on an SD card, so it's easy to prepare, run and debug several different operating systems on the same hardware. Most Linux distributions for the Pi will happily live on a 2GB SD card but larger cards are supported. The Model A's built-in USB port provide enough connectivity for a Wi-Fi adapter, mouse, or keyboard, but if you want to add more you can use a USB hub. It is recommended that you use a powered hub so as not to overtax the on-board voltage regulator. Powering the Raspberry Pi is easy, just plug any USB power supply into the micro-USB port. There's no power button so the Pi will begin to boot as soon as power is applied, to turn it off simply remove power. On top of all that, the low-level peripherals on the Pi make it great for hardware hacking. The 0.1" spaced GPIO header on the Pi gives you access to 8 GPIO, UART, I2C, SPI as well as 3.3 and 5V sources. Mating ribbon cables can be found in the related products below. Dimensions: 85.60mm x 56mm x 21mm Features: Broadcom BCM2835 SoC 700 MHz ARM1176JZF-S core CPU Broadcom VideoCore IV GPU 256 MB RAM 1 x USB2.0 Port 1 x micro-USB Port Video Out via Composite (PAL and NTSC), HDMI or Raw LCD (DSI) Audio Out via 3.5mm Jack or Audio over HDMI Storage: SD/MMC/SDIO Low-Level Peripherals: 8 x GPIO UART I2C bus SPI bus with two chip selects +3.3V +5V Ground Power Requirements: 5V @ 300 mA via MicroUSB or GPIO Header Supports Debian GNU/Linux, Fedora, Arch Linux, RISC OS and More!

MicroSound PIR Motion Sensor Speaker Power input 3V-5V DC Regulated Power SupplyWorking Current-   Standby State-