Rakiro Biotech Systems Pvt. Ltd. MIDC, Mumbai, Maharashtra

Our range of portable Pen Type meters are economical range of easy to use and reliable hand held pen type meters. An important feature of the testers is the compact single chamber design. The meter gives accurate readings with its Built-in temperature sensor and can be easily calibrated. The meter is provided with an Auto Off function o enhance the battery life of the LR44 batteries. Also a hold function helps the user to Read and Record results with ease and convenience.  These meters are cost effective and come encased in a protective carrying pouch for safety and portability. Features : > Fast, Reliable and Accurate measurement.> Compact Single Chamber Design> Built-inTemperature Sensor> Auto Shut Off Function to Enhance Battery Life> Hold Function for Ease of Read & Record> Easy Calibration.> Available in a Portable Pouch.

Range : 0 – 9990 PPM & 0 – 9990 µs/cm

Resolution : 1/10 PPM

Power : 3V x 2 Lithium Batteries LR44

Weight : 55g  

Measurement of Conductivity / TDS in laboratory is regularly performed in major industries, thus we provide an economical, accurate and reliable Laboratory electrode. These electrodes are specially designed with high performance plastic body for precise measurement of Conductivity / TDS and they are compatible with all the major Conductivity / TDS meters and Indicators. These electrodes can also be installed on measured surface or devices using a unique designed ½” NPT connector available with us. Features Low maintenance, non-refillable, epoxy body High Performance Plastic Body Convenient installation using ½” NPT connector.

The first thought that comes to mind when we think of safety in swimming pools is drowning, slipping and falling, etc. But do we really know that the most probable hazard is contamination by germs, viz. bacteria. Therefore the likelihood of us falling prey to these sicknesses is much more than that of drowning, etc. Bacteria spread through people, who have diarrhoea and as the pool is shared by many swimmers, it can be very easily be contaminated. Even best maintained swimming pools can spread illnesses due to these microscopic predators, the bacteria. Therefore to ensure a disease free swimming experience, regular disinfection of the water is essential. Generally, Chlorine is the disinfectant of choice and a residual has to be maintained to ensure complete disinfection as well as residual protection. Now for Chlorine to be effective, the pH (Hydrogen Ion Concentration) of the water should preferably be between pH 6.5 to 7.5. Water below pH 6 or above pH 8 could be uncomfortable for skin. Now to be doubly sure that the chlorine dose is effective, monitoring of harmful bacteria content is essential. However, detection of these unseen predators is always a tedious and time consuming task, in a laboratory, by the conventional methods of microbiology. Now our AQUASOL Swimming Pool Test Kit helps in testing pH, Chorine & Bacteria by anyone, anywhere in a matter of a few minutes. Our ready to use kits helps to monitor the levels of Chlorine & pH on daily basis as well as has tests for harmful disease causing bacteria.

SRB (Sulfate Reducing Bacteria) Test Kit Sulfate Reducing Bacteria (SRB) are those bacteria that can obtain energy by oxidizing organic compounds or molecular hydrogen while reducing sulfate to hydrogen sulfide. They are also know as Sulfide Generating Bacteria (SGB) and commonly found in anaerobic environments where they aid in the degradation of organic materials like secondary oil recovery effluents, estuarine waters, deep wells, cooling waters, metalworking fluids, water-based hydraulic fluids, and petroleum based products. They can survive up to 600 DegC & cause pitting corrosion on metal structures that are exposed to sulfate-containing water by cathodic depolarization. They also play a role in the anaerobic oxidation of methane below the seabed in the transition zone which leads to heavy production loss. Since sulfate is also found in some formulations of or the other used in water treatment, viz, corrosion inhibitors, coolants, etc. Sulfate acts as a hydrogen acceptor produces hydrogen sulfide and ferrous sulfide. These together form a malodorous black slime. In some case bubbles of H2S rise though the water and cause objectionable odors. The corrosion of iron by sulfate reducing bacteria is rapid and unlike ordinary rusting, is not self – limiting. Our specially developed test kit with a unique 10ml sample size gives a much detailed quantitative analysis of the SRB count in a sample. BACTASLYDE SRB is supplied in boxes of 5 along with the complete instructions set for a complete quantitative analysis of the contamination.

Soil testing is the analysis of a soil sample to determine nutrient and contaminated content, composition, and other major nutrient characteristics. A soil test can determine fertility, or the expected growth potential of the soil which indicates nutrient deficiencies, potential toxicities from excessive fertility and inhibitions from the presence of non-essential trace minerals. Soil testing is often performed targeting groups of compounds and minerals which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop. The advantages of testing are that excessive use of fertilizer can be avoided which results in reduction of Waste of plant & potential damage to environment can be controlled. Therefore it makes good sense to test the soil for these nutrients and add the required amount of fertilizer. Soil has to contain some major nutrient for the crops to be healthy. The major nutrients which need to be in adequate quantities for the soil to be productive and subsequently give a healthy crop are: NITROGEN Nitrogen encourages above ground vegetative growth & it serves as the source for the dark green color in the leaves of various crops. PHOSPHOROUS Phosphorus is a component of the complex nucleic acid structure of plants, which regulates protein synthesis. It is therefore, important in cell division and development of new tissue in roots. POTASSIUM Potassium takes care of multiple functions like Photosynthesis, Protein Synthesis, and Starch formation and for the translocation of Sugars. It also imparts resistance to the plant against Microbial attack and if deficient results in poor flowering and fruit formation. pH pH is important because it influences how easily plants can take up nutrients from the soil. Also is useful in prevention of soil borne disease. ORGANIC CARBON Carbon content of soil is a major factor in its overall health. Soil carbon improves the physical properties of soil and water-holding capacity of sandy soil. Also it contributes to the structural stability of clay soils by helping to bind particles into aggregates of which carbon is a major part, holds a great proportion of nutrients that are of importance to plant growth. It prevents nutrient leaching, and is integral to the organic acids that make minerals available to plants.

Boiler water sludge is caused by salts and traces of suspended matter present in operational steam boilers and feed waters. Our boiler sludge conditioner is designed to combat the accumulation and build-up of boiler sludge as it represents a modern concept in the chemical treatment of boiler sludge. It is a synthetic polymer designed to produce light, finely divided particles which are non-adherent and are easily removed with blow down. It can withstand high temperature and pressure conditions (up to 100 kg/cm2) and does not impart taste or odour to steam. These characteristics make it superior to many older natural organic treatments and it is recommended even where steam is likely to come in contact with edible products. It also has the additional feature of minimizing iron oxide deposition by reducing ferric oxides to the more desirable black oxide magnetite, thus it is effective in removing oil traces in the boiler.  

The unwanted accumulation of scale and detrimental impact of metallic corrosion can be significant issues that affect the operation and maintenance of open and closed cooling water systems. To ensure that such open and closed cooling systems are well maintained and operate at optimum efficiency, it is essential that the correct water conditions are maintained at all times. This can be achieved using carefully selected scale and corrosion inhibitors designed specifically for such cooling systems.Our technologically advanced cooling water scale and corrosion inhibitors have been scientifically formulated to protect cooling systems from the effects of both scale build-up and metallic corrosion in a single product. Our scale and corrosion inhibitors deliver improved performance, helping to reduce maintenance costs, improve reliability and optimise operational efficiency.  

Our Industrial Reverse Osmosis Systems are engineered to economically produce high purity water by removal of dissolved minerals, particles, and other impurities. Each system is constructed using the highest quality components and materials for reliable operation and exceptional performance.We ensure the compliance of our products with the defined industry standards and quality guidelines. Our standard machines are available with product water outputs from 200 LPH to 2000 LPH. We also offers a wide variety of customised system for pre/post treatment, distribution pumps, and integrated controls for a complete water treatment system.Our specialty is skid mounted, pre-piped, and pre-wired equipment allowing for quick installation and start-up time. We are always ready to work with you to design a customized system meeting your water treatment requirements at leading market price.   Features: Compact, Sturdy & Ergonomically DesignMulti-Functional Control PanelConvenient Auto Flushing SystemControlled Reject Recovery System.Inlet & Outlet CIP (Clean-In-Place) Arrangements.Including Tank Float Valve for Auto cut-off.

Corrosion within the pipe work used to transport potable water can lead to several problems like discolouration of water/fittings, increase the level of iron & copper in water & cause leakages in pipe. Our formulation is designed for control of calcium and magnesium deposits, sequestration of dissolved iron & magnesium and control corrosion. It helps in control of Iron and manganese in the well water system.  

Condensate systems have problems caused by iron and copper corrosion, neutralizing amines are used to neutralize the acid (H+) generated in the condensate. They control corrosion in the condensate system by maintaining a protective coating of iron oxide over the metal surfaces, while supplying sufficient material of an alkaline nature, to neutralize the carbonic acid that is formed in the condensate system. Our formulation is a blend of volatile product for steam condensate treatment that provides the direct neutralization of carbon dioxide and ensures positive corrosion protection. It is formulated to provide an ideal vapour-liquid distribution ratio, to protect all parts of the steam/condensate system with the minimal product loss.  

Generally, a swimming pool uses chlorine for disinfection, but it has lots of disadvantages as it chemically changes and becomes chloramine. Thisis the reason that chlorine pools often have a distinctive smell, cause skin/eye irritation, create a unpleasant odour. Our new Nano Silver based disinfectant has ability to kill the entire bacteria in swimming pool’s water and to create a self-antiseptic mechanism in the pool despite introductionofnewbacteria.AregulardosageofourformulationnotonlyhelpstodisinfectthepoolbutalsosavewaterandReducethefrequency of water change. It is absolutely safe for human health, environment friendly and does not create any unpleasant odour.  

Our multipurpose boiler water treatment chemicals have been designed to offer multi-component boiler protection in a single chemical product. It is a special product designed to prevent scale and corrosion on the waterside surfaces of medium-and-low pressure boilers using unsoftened feed water. It is a combination of modern water treatment chemicals comprising of chemical softening agents, sludge conditioners and oxygen scavenger which protect the feed lines and the boiler form scale and corrosion. This brings convenience of using a single chemical treatment product, with multifunctional protection capabilities to deliver all-round boiler protection.  

We have specially developed an accurate, high performance and multipurpose handheld meter for on field analyses of parameters pH, TDS, Conductivity, and ORP. These meters measure temperature and are available with a single electrode to measure all the parameters. The meters has a multi parameter option i.e. same meter can analyse ORP by just connecting an ORP electrode. Understanding the need of a multi parameter meter for onsite use, we have designed a compact, spill proof & high performance Multi parameter Handheld Meter. Features: Microprocessor based designed with large LCD displays readings. Rugged design with waterproof housing that makes It to floats on water. Measuring 5 parameters: pH, Conductivity, TDS, Salinity, and temperature by just on combo electrode. Automatic Temperature Compensation (ATC). Simple to calibrate by one keyboard. Auto power shut off after 10 minutes of non use. Easy replaced electrode module.

Measurement accuracy for pH depends on quality and specification of the instruments you use. We have variety of Industrial Electrodes that are used in Process Industries for monitoring and control of pH. These electrodes have compact design with single chamber weatherproof Case for insertion or flow through installation.     Features Advanced Teflon Diaphragm Design Built In Temperature Sensor Sealed Double Junction Reference. High Performance Thermoplastic Body Convenient installation in form of flow-through or immersion

Evaporator systems in sugar industries tend to accumulate salts. The first two Evaporator bodies have generally a deposition of carbonate and phosphate, while the third and fourth have sulphates and silicates. These deposits are results of the sulphitation and lime processes done in clarification of the juice. Our formulation is a blend of low molecular weight polymers which helps in protecting the quadruple evaporators from scaling & deposits in multiple ways. It is very effective for Carbonate, phosphate, sulphate, silicate deposits and it maintains a consistency in the Brixs of sugar juice in respective evaporator bodies.It thus helps retarding the scale formation in the evaporator and improves heat transfer by increasing the solubility of dissolved salts reducing evaporator cleaning frequency.    

Water contaminated with bacteria is a major cause of water-borne disease in humans. Enteric diseases like diarrhoea, dysentery, typhoid, paratyphoid, gastroenteritis, cholera, etc. are caused by the tiny menaces viz bacteria. Detecting these dangerous but unseen predators is quite a tough task and normally it is the domain of the white coated microbiologist who works amidst sterile conditions and a lot of hush hush secrecy. No longer! Modern science has now made testing so easy and convenient. Just do it yourself Our unique water potability test kit helps you detect coli form group of bacteria with ease and convenience. These coliform bacteria are found in sewage as they are present in the intestine of man and animal and are generally accompanied by the harmful disease causing bacteria. ChekNsee helps to check water from all kinds of sources viz. taps, purifiers, coolers, storage tanks, rivers, ponds, springs etc. This extremely simple and convenient test can be carried out by anybody, anywhere i.e. homes, offices, factories, shops, banks, hospitals, hotels, schools, etc.

Dissolved oxygen analysis measures the amount of oxygen (O2) dissolved in an aqueous solution. Oxygen enters water from the surrounding air and as a by product of photosynthesis. Testing with portable oxygen meters determines whether or not you have optimal dissolved oxygen levels necessary for good water quality. For accurate results this test should be performed on site. Our handheld type advance microprocessor based, fast and accurate DO/O2 meter is ideal for such applications. Features: Microprocessor based for fast and accurate measurements. Large LCD display DO and Temperature readings simultaneously. Simple to calibrate by one keyboard and ATC. Memory with Data-hold and Max/Min and shows PTS after calibration. Easy to replace the DO probe module.

The detrimental impact of metallic corrosion can be a significant issue that affects the operation and maintenance of open and closed cooling water systems. To ensure that such closed cooling systems are well maintained and operate at optimum efficiency it is essential that the correct water conditions are maintained at all times. This can be achieved using carefully selected corrosion inhibitors designed specifically for cooling systems. Our advanced technology cooling water corrosion inhibitors have been scientifically formulated to protect cooling systems from the effects of metallic corrosion. Our high performance corrosion inhibitors deliver improved system performance, helping to reduce maintenance costs, improve reliability and optimise operational efficiency.  

A Conductivity Meter measures the electrical conductivity in a solution. Commonly used in hydroponics, aquaculture and freshwater systems to monitor the amount of nutrients, salts or impurities in the water. This instrument is ideal for testing liquids like natural water, drinking water, treated water, waste water, brine solution, sea water and soluble salt content in liquids.  

Our cleaning system has been specially developed to effectively remove deposit, sludge / foulants from the system. It is a blend of specific chelating agents designed for removal of Iron, Calcium and Magnesium based deposits from cooling water systems where it is not practical to remove the tower packing. It is found to be most effective in cleaning, where deposition or   oil   contamination   is   suspected of reducing   heat   transfer   or restricting flow available. Deposits are softened and solubilized as our cleaner penetrates the deposits and enhances the action of cooling water dispersants to slough off remaining deposits which are later removed during a blow down or draining.  

To achieve maximum sugar extraction from crushed cane, sugar losses are to be maintained at a minimum in sugar mills. One of the major losses faced by a sugar factory is the sugar lost in bagasse during processing. Our unique ingredient and the synergistic functions of the formulation help in extraction of additional sucrose from bagasse on line. Its chemical composite helps to leach maximum sugar from bagasse by reduction of pol percentage in bagasse, reduction in moisture of bagasse and prevent non sugar coming out of bagasse. This additional sugar recovered from waste bagasse adds to the savings for the sugar mills & increases output efficiency.  

AHU if not cleaned regularly & properly lose their cooling efficiency & consume more electricity which drastically reduces its efficiency. To prevent this problem it is important to clean the AHU regularly. An effective cleaner would keep the AHU free of muck and dust running efficiently, thereby keeping the electricity consumption low. Our inhibited alkaline cleaner is useful in cleaning of Air Handling Units (AHU), Aluminum piston and Radiators. Also it has exceptionally long tank life and does not produce any objectionable odour, so it can be used for heavy duty cleaning at a economical price.