Reaction Vessels Dealers in Kandivali, Mumbai

Energypack has fabricated pressure vessel as per ASME under Third party inspection like EIL/SGS/ LOIYDS/RITES/BUREAU VERITAS etc.

• Material: Stainless Steel
• Shape: Cylinder Shape, Round

• Capacity: 5 Kilolitre
• Phase: 3PHASE
• Material: PP+FRP REACTOR
• Usage/Application: Chemical Industry

The Manufacturing Vessel is a jacketed cylindrical vessel with torrispherical dish ends and propeller type agitator. The vessel can be provided with a top stirrer or a bottom stirrer arrangement as per customer requirement.

The FBR process is the latest advance in attached growth aerobic biological treatment technology. FBR employs RING PAC MEDIA, neutrally buoyant bio film carrier elements, to achieve outstanding BOD/COD removal productivity from a compact bioreactor. In Fluidized Bed Reactors, the liquid to be treated is pumped through a bed of small media at a sufficient velocity to cause fluidization. In the fluidized state the media provide a large specific surface for attached biological growth and allow biomass concentrations in the range 10-40 kg/m3 to develop. For aerobic treatment processes the reactor is aerated. This is done by recalculating the liquid from the reactor to an oxygenator where air, or possibly oxygen, is bubbled. To overcome problems related to high re-circulation rates, needed when there is high oxygen demand in the reactor, the reactor might be aerated directly. The basis for the use of fluidized bed systems is the immobilization of bacteria on solid surfaces. Many species of bacteria (and also other microorganisms) have the ability for adhering to supporting matrices. In this process, a volume of Ring Pac media is immersed in water and is fluidized (kept in constant motion) through the movement of gas and liquid in the treatment reactor. As the media supports a biomass concentration several times that achievable in activated sludge systems, treatment is significantly more productive. Advantages The FBR requires very less hydraulic retention time (HRT) compared to an extended aeration or activated      sludge process to perform the same BOD reduction duty.  High resident biomass concentration, intense mass transfer conditions and aggressive biomass-sloughing      action enable the process to rapidly respond to variations in process load  Less footprint area required for installation.  Less operation and maintenance cost during plant operations.

Flush Bottom Outlet value (Zero Dead Leg), Bottom mounted Magnetic mixer with speed variation from 50 to 350 RPM, Sterile Flange Connections for Top dish nozzles to enhance CIP, SIP operations, Temperature sensing through sanitary knuckle port on vessel shell, Conductivity sensing through sanitary knuckle port on vessel shell, Vessels are designed in accordance with ASME BPE Guidelines

We offer frp mb vessel. With the assistance of experienced and dedicated professionals, we offer our clients functionally advanced range of customized frp mp vessel. They have smooth finishing standards and are dimensionally accurate in nature. They are highly durable and are corrosion resistant in nature. We offer them in different technical grades and are valuable at most affordable rates. features: corrosion resistant light in weight high impact strength easy to handle & install maintenance free superior outlook

• Material: Stainless Steel
• Shape: Round
• Certification: CE Certified
• Color: Grey
• Capacity: 100-1000ltr
• Surface Finishing: Powder Coated
• Warranty: 1year
• Working Temp: 0-50Deg C

We are leading manufacturer and supplier of huge range of High Pressure Vessel.

• Type: Spherical Vessel
• Material: Aluminium, Metal, Mild Steel, Stainless Steel
• Shape: Spherical
• Application: Gases, Transmit Liquids, Vapors
• Color: Brown, Golden-Grey, Grey, Light Green, Metallic, Shiny Silver, Silver, White
• Condition: New, Used
• Capacity: 100-1000ltr, 1000-2000ltr, 2000-3000ltr, 3000-4000ltr, 4000-5000ltr
• Pressure: 0-15bar, 15-30bar, 30-45bar, 45-60bar
• Surface Finishing: Chemical Coated, Powder Coated
• Feature: Anti Corrosive, Durable, Eco-Friendly, High Quality, Rust Proof, Shiny Look, Stable Performance
• Warranty: 1year, 2years
• Working Temp: 0-50Deg C, 50-100 Deg C

• Feature: Insulated, Level/Pressure Indicator
• Material: FRP, Stainless Steel
• Capacity: Cutomize Capacity

• Color: Blue
• Capacity: 0 -100 Kg
• Shape: Rectangular
• Types of Plastic Material: HDPE

We are offering plastic crates.

We are offering floor ground receptacles. floor ground receptacle of heavy duty construction. Receptacle furnished for all size ground rods, either plain or threaded.

Thermosyphon Systems Performance Limits Capacity : 7.5 LiterHyd. Test Pressure : 30 KgWorking Pressure : 20 KgMax. working temp.: 180°C Heat Transfer area of cooling coil : 0.3m²Cooling water flow rate  Recommended: 12 Ltrs /min Max. Level Value : 5.5 LtrsMin. Level Value : 3.5 Ltrs Metal Parts Thermosyphon Shell : Carbon Steel / SS 316/SS304Cooling Coil: SS 304 / SS 316> Accessories Pressure Gauge (0- 40 kg/c m²)For Pressure Measuring of the vesselLevel Gauge For Liquid Level Indicate of the vesselHand Pump For recharge of the vessel With additional quantity of barrier fluid when Thermosyphon is under pressure and Liquid level is low. Connection Size: Buffer fluid Inlet - A ½" NPTBuffer fluid Outlet – B ½ NPTCooling water Inlet – C ½" NPTCooling water Outlet – D ½" NPTHand Pump Connection – E – ¼: NPT (Refilling Connection)Filling Connection – F –1 ¼" NPTPressure Gas Connection – G ½" NPTPressure Gauge Connection – H 3/8" NPTDrain – I ½" NPTSafety Valve Connection – J ½" NPT Thermosyphon vessels can be used to provide a source of clean, Pressurized barrier fluid to Double mechanical seals in back to back and nonpressurised buffer fluid for tandem seal Arrangement. The Barrier fluid enters the Thermosyphon Vessel, where it is cooled by water circulating through cooling coil to bring down the temperature of barrier fluid and back to the seal chamber. Super Thermosyphon arrangement is very effective.

• Brand Name: Muez Hest India Private Limited

We are engaged in providing fine quality evaporator to our valuable clients. Specification: •more heat exchange •no contamination in product •more efficiency •low maintenance •more productivity •low cost we offer these heat exchanger at most affordable prices to our precious customers.

reaction kettles, Pharmaceutical, Paint, Pressure Vessels, auto claves

• Capacity Range: 50 Ltrs to 1,00,000 Ltrs
• Pressure Range: 10 to 150 kg/cm/g
• Temp. Range: 100 0C to 350 0C

Our Multipurpose Reaction & Distillation Systems like process reaction vessel, industrial reaction vessel, industrial reaction vessels, process reaction plants for manufacture of Bulk Drugs and APIs are designed keeping into consideration the various Process Parameters, also including clean-ability & product impurity profile. Based on these data, we analyze the Heat Transfer requirements, Degree of Agitation, Pressure - Temperature Ratings, Space Availability, Surface Finish requirements, Product Properties, HAZOP Studies, Corrosion Allowance etc., to offer an optimum system suiting your application.   Offering •  Offered complete GMP systems with Basic & Process Engineering, Layout & Detail Engineering.•  Also meeting 'C-GMP' Standards and stringent requirements of International regulatory bodies like USFDA, UKMCA, TGA etc.•  Designed in accordance with the various international codes for Pressure parts•  Internal surface finish’ up to 600 Grits with Mechanical / Electro-polishing having Crevice-free Internals to avoid    contamination and facilitate thorough cleaning during product changeovers•  Condenser vapour side is removable to facilitate manual cleaning•  Pre - insulation for hot and cold service with removable SS304 cladding•  Specially designed sealing mechanisms for bearing housing to prevent grease leakage even in a solvent atmosphere•  Offered German Helical gearbox having high efficiency and Quadralip Oil Seal to prevent frequent seal failure    resulting in oil leakages, also available with oil leakage collection chamber•  Offered with various types of agitators such as Anchor, Turbine, MIG, Hydrofoil, Propeller, Helical and Contra mixer etc.•  The Vessel, Receiver, Column & Condensers with bolted openings can be dismantled to facilitate manual cleaning     periodically or between product changeovers•  The Nozzle & the Reflux line connections can be provided with Sanitary Triclamp, DIN, SMS, IDF or flange ends     as specified by the user     Pressure VesselsOur multipurpose pressure vessels tor manufacturing bulk drugs, APIs and chemicals are designed keeping in mind various process parameters such as the heat transfer requirements, degree of agitation, pressure and temperature ratings, surface finish requirements, product properties, HAZOP studies, corrosion allowance arid so on.We offer pressure vessels that conform to AS ME, TEMA, DIN, BIS, IS, SMPV, EJMA, API, and C-GMP standards1 for the stringent quality requirements of USFDA, UKMCA and TGA.These equipment are .constructed in a variety of material as per specifications. Specially designed sealing mechanism for bearing housing prevents oil leakage even in solvent atmosphere.In addition, we offer various types of Agitators including Anchor, Turbine, MIG, Hydrofoil, Propeller, Helical and Contra Mixer.PressureOur Multipurpose Pressure Vessels for Manufacture of Bulk Drugs, APIs, Chemical, etc are designed keeping into consideration the various process parameters including cleanability & product impurity profile. Based on the data we analyse the Heat Transfer requirements, Degree of Agitation, Pressure - Temperature Ratings, Space availability/ Surface Finish Requirements, Product Properties, HAZOP Studies. Corrosion allowance etc. to offer an optimum Pressure Vessel suiting your application,Offered Complete GMP / Non GMP Pressure Vessels with Basic and Process Engineering, Layout and Detailed Engineering.Also Meeting Stringent requirements of International Regulatory bodies like USFDA, UKMCA, TGA, etc. Designed in accordance with various International Codes for Pressure Parts.Specially designed Sealing Mechanism for Bearing Housing to prevent oil leakage even in Solvent atmosphere.Helical Gearbox with Quadralip Oil Seal with optional OilLeakage Coilection Chamber.Offered with various types of Agitators viz. Anchor, Turbine , MIG, Hydrofoil, Propeller, Helical & Contra Mixer, etc.Conforming to ASME, TEMA, DIN, BIS, IS, SMPV, EJMA, API, etc.Equipments are offered in various Material of Construction including Stainless Steel, Duplex Steel, Special Alloy Stainless Steel, Hastelloy, Inconel, Monel, Nickel, Titanium, Cupro-Nickel, Aluminium, Bronze, Carbon Steel, etc.Reactors ProcessWe have developed a range of highly efficient impellers for gas liquid reaction. This coupled with ability to design & manufacture Reaction Vessels to the International Code & Standard have helped us to engineer the right solution for Gas - Liquid Solid Reaction Vessels for aggressive services. This Equipment is ideal for any batch type Gas – Liquid reactions such as Hydrogenation, Oxidation, Ethoxylation, Phosgenation, Chlorination, Ammonolysis, Ccrbonation, Bromination, Sulphonation, Fluonnation etc.Special Features of our Agitator : High Heat Transfer Rate Optimum Utilisation of Gas High Flooding LimitsReliable Containment of gas and the product of the reaction Higher Productivity due to higher mass transfer rates Homogenous suspension of the catalyst and higher catalyst life