Refrigeration Spare Parts Dealers in Chembur, Mumbai

The basic element of all thermostat controls, all the desirable features of the ideal thermostat – high sensitivity, wide adjustment range, small sized, rugged construction, vibration resistant, and low cost are included in this thermostat control. This unit may be inserted in a 15.875mm (58") reamed hole.If reamed hole is used; a short spline should be added this prevents thermostat from turning when the temperature adjusting sleeve.

Air Refrigeration Compressor spares - Mumbai , India. All kinds of Air Refrigeration compressor spares. Air Compressor Spares Refrigeration compressor spares We are Manufacturers of compressor spares and equipments. We have been manufacturing Air and Refrigeration compressor spares. The company is located in Mumbai , India Our experience in Air and Refrigeration compressor spares has helped us to gain the trust of clients in not only Mumbai but all over India. We provide the best solutions for your Air Refrigeration compressor spares compressor spares manufacturer, compressor spares supplier, gas compressor spares, gas compressor parts, compressor parts manufacturer, compressor parts supplier, compressor spares parts, gas compressor spares parts, air compressor spares, air compressor parts, screw compressor spares, refrigerated compressor spares, reconditioned air compressor, screw air end servicing, heat exchanger, air dryers, air receiver, compressor accessories.

A] Air Compressor - Spare Parts 1] INGERSOLL-RAND :- [ IR- T-30 SS NL LPG Series ] 2] INGERSOLL-RAND :- [IR- ESV ESH IHE PHE LLE HSE XLE- Series ] 3] ELGI Compressors : - [ ELGI- SC TC THPC HV SS TS HP Series ] B] Other Air Compressors- Spare Parts 1] FOUJI :- [ FOUJI- MB SMB FI FID MBD ] 2] AIR-MARSHAL :- [AIR- MARSHAL- GC-305V , GC-294 , GC-7150 , GC-2595 ] 3] BOSS :- [ BOSS- MB SS SD ST TD TT HT HP ] 4] INDO-AIR :- [INDO-AIR- IA IAV ] 5] JK PNEUM :- [JK PNEUM- 25S , 50S , 75L , 100L , 75H , 150H ] 6] PARKEEN :- [ PARKEEN- SA SB SF SS SV TCA TCB TCI TCK ] 7] PNEUMECH :- [ PNEUMECH- PM PMF ] 8] ZEN AIR :- [ ZEN- 75H 150HH 75L 125L 25S 50S ] C] Screw Compressor - Spare Parts 1] Ingersoll-Rand ELGI Atlas - Copco CP Kirloskar Khosla Kaser Sullair Boge D] Refrigeration Chilling Compressor - Spare Parts 1] Accel Sabroe Carrier Voltas Grasso Kirloskar Stal Thermoking Trane Vilter All the Models Refrigeration Chilling Compressor Spare Parts E] Marine Compressor - Spare Parts 1] Sperre Tanabe Hatlapa Hamworthy All the Models Marine Compressor Spare Parts We do Export our product to Asian countries, Middle East, America, Canada, Europe etc. Countries. We aim to explore new avenues and conquer new frontiers. SUBHADRA ENGG. CORPORATION.

• Brand Name: Swaraj
• Material: Brass
• Length: 175 MM
• Application: Switchgear & Panel Boards
• Color: Grey
• Temperature Range: 25-75C

We are reputed sellers engaged in providing best quality products to our buyers at reasonable prices.

• Phase: Single/Three Phase
• Power Source: AC
• Power: 230 VAC at 50 Hz(Supply)
• Temperature: 20 to 80 Degree Celsius
• RH: 10-95%, Non-condensing
• Display: GLCD

Features : Advanced Micro controller based GLCD Alphanumeric Display Support 2 door / 3 Door Entry / Exit Built in Emergency & Can connect to Fire Alarm Station User Programmable Blower On Time (MM:SS format)  Password / Change Password to enter the Menu User Entry From Exit Door (Programmable by user) Built in Real Time Clock User Programmable Blower Timer From exit Door Entry Read feedback from Electromagnetic lock Built in power Contactor & MCB Easy to installation & user friendly wiring Soft touch Membrane keypad Door locked / realised Led Indication on entry Exit panel

Features: Sleek designs UV- and corrosion-resistant Inner grooved copper tubes and slit aluminum fins for superior heat transfer Energy-efficient compressors Safety and control devices built in Weather-proof canopy

Complete technology for PVC profiles and other components designed for household and industrial refrigerators and freezers, including barium ferrite strips and ancillary machines, with more than 200 shapes available.

• Type: Reset Thermostat
• Material: UPVC
• Application: Clinical Use, Monitor Temprature
• Certification: CE Certified
• Length: 10-15cm
• Color: Available in Many Colors
• Temperature Range: 10-50C, 100-150C
• Feature: Easy To Use, Hygenic

We are a chief Manufacturer, Exporter and Supplier of Manual Reset Thermostat (SN-8M). The Manual Reset Thermostat (SN-8M) is just like SN-8 with a reset button. The Manual Reset Thermostat (SN-8M) offered by us provides excellent reliability to commercial applications such as vending machine, photo copiers, boiler, etc. SN-8M is a model which operates within a temperature range of 160 deg C. It is manually reset. 100% factory inspected for continuity, function and contact resistance and temperature High temp plastic base provides : high temperature capability, clean processing, high impact strength Factory pre�set bimetal disc ensures : safe and reliable accurate operation, tamperproof settings Features Manual reset for safety High current capacity Automatic cut-off in case of overheating High thermal sensitivity Variety of mounting brackets and terminals available Long contact life Applications Printed Circuit Boards Vending Machines Water Heaters Vacuum Cleaners Boilers Photo Copy Machines Electrical Stoves Other Small Appliances Rating Maximum Voltage : 230VAC Max Current ( For non-inductive loads) : 16A Max Temp 160 : Deg C Max operating cycles : 1,00,000 We also provide tthis model for inductive loads for bulk orders. Characteristics Dielectric Strength : 1500 VAC, rms, 60 cycles for 1 minute, terminal to case Ambient Temperature Range : 50oC to 160oC Differential : 10 deg, 15 deg, 20 deg Configurations Our most common configurations are depicted below, but many other styles are available The SN-8M can be custom packaged to meet your specific design requirements Terminals 3/16 or 6.35 type terminals are available which can be riveted flat or vertical 1/4 or 4.6 type terminals are available which can be riveted flat or vertical Mounting style M0 - No mounting M6 - Loose Bottom Bracket M4 - stud type mounting M2 - Fixed top flange M7 - fixed top flange The drawings of the mounting bracket is shown. Any terminal style may be matched with any mounting style. Selestion Code SN-8M/NC(8)/110(3)/0/M6/6.35/F Temperature setting can be given as per requirement

• Material: Stainless Steel/Carnob Steel
• Application: Industrial
• Finishing: Smooth Finish
• Capacity: As per customer requirement
• Temperature: As per customer requirement
• Thickness: As per Design

Condensing units, A chiller is a machine that removes heat from a liquid via a vapor-compression or absorption refrigeration cycle. This liquid can then be circulated through a heat exchanger to cool equipment, or another process stream (such as air or process water). In systems involving heat transfer, a condenser is a device or unit used to condense a substance from its gaseous to its liquid state, by cooling it. In so doing, the latent heat is given up by the substance and transferred to the surrounding environment.

  Complete technology for PVC profiles and other components designed for household and industrial refrigerators and freezers, including barium ferrite strips and ancillary machines, with more than 200 shapes available.   Refrigeration Parts  -   PVC Profile Extrusion COLINES® is leader in the design and manufacture of complete lines for the production of magnetic gaskets for household, industrial refrigerators and freezers including lines for the production of soft PVC and magnetic profiles.The hallmarks identifying these machines are: - manufacturing quality of superior level - reliability over time - close liaison with worldwide recognized leading producers - more than 200 moulds and dies designed in the last few years - low energy consumption Welding machines - production of 30/40 pieces/hr - automatic trimming system for PVC gaskets welded at 90° Inserting machines - production of 1000 pieces per hour of 1 linear mt 

• Type: Air Cooled / Water Cooled
• Compressor: Constuction - Open / HermeticallySealed / Semisealed
• Compressor Type: Reciprocating / Scroll / Screw
• Capacity: 1 to 200 TR
• Temperature: (-) 30°C. To (+)15°C.
• Refrigerant Gas: R-22 / R-134a / R-404a / R-407c / R-410a /R-507 / & R-717 (Ammonia)
• Construction: Body – Open design / Canopy design
• Features: Heavy duty designed with suitable materialto deliver best efficiency
• Application / Use: Air Conditioning / Refrigeration /Cold Storages.
•  :  

Features: Sleek designs UV- and corrosion-resistant Inner grooved copper tubes and slit aluminum fins for superior heat transfer Energy-efficient compressors Safety and control devices built in Weather-proof canopy

Condensing Units, Air Conditioners, Air Handling Unit, Cold Storage

refrigeration spares parts, Refrigeration Gas, air conditioner gas

refrigeration parts, Air Conditioning Parts, refrigeration gases

Automatic Reset Thermostat, Electric Control Panel, Manual Reset Thermostat

Thermostats, Fire Detectors, RTD Sensor, Heating Elements

air conditioning condensers, Fin Fan Coolers, Chemical Cleaning

coil condenser, driers, Electrical Goods, Electrical Equipment

air conditioning condensers, Copper Fin Coil, dry cooler

car ac condenser, Auto Spare Parts, Wheel Caps, alternator assemblies

Appliance Thermostats, Motor Protector, Thermal Overload Protector

Thermostat, Steam Desuperheaters, Unit Cooler

Condenser, Heat Exchanger, Evaporator, Pressure Vessel

Water Cooler Condenser, refrigeration, Cooling Coils, Coils

Mechanical Thermostat, Heating Elements, Fin Heaters

refrigerator thermostat, Refrigerator Door Switch, Refrigerator Filter

Condensers, Air conditioner, Cooling Coils, cooling devices