Relay Tester Dealers in Mumbai

• Input: 230volts+/- 10%,singlephase, 50Hz,AC
• Output(s): (a)Current Output (s) available one at a time

Relay testing Kit in one unit, is suitable to test different types of Relays like over current, over voltage,under voltage,earth fault etc. The Test Kit will be in one unit. Meters, Terminals ,Indicators, Regulator Knob,Timer Display etc.will be fitted on the horizontal panel of the cabinet which can be approached by opening the top hinged lid. An input chord of 2 meters length with 3 pin plug will be provided. Loading transformer,Measuring CT & protection circuit will also be housed with in the same unit

Features : Potential -Free start and stop signal Continously adjustable outputs Portable Models Automatic Self Sensing of Contacts, i.e. NO /NC Digital ammeter, voltmeter and time interval meter (UniTimer) UniTimer automatically puts OFF the output, when timer reaches to its maximum value of the selected range to ensure safety of the instruments as well as the item under test. Wide range of measurement, i.e. from 1 millisecond. To 9999 secs In four ranges. APPLICATIONSThe protective devices such as relays, overload coils, circuit breakers must be checked regularly to ensure that, they are always ready to operate correctly. If a fault occurs in the equipment, which they are protecting, routine relay testing will quickly detect the faulty, incorrectly adjusted protection circuits correctly. It is usually necessary to measure its operating time. The micro controller based time interval meter is used for this purpose in all AJIT brand relay testers.   Technical Specifications :Input Supply : 230V, AC, + 10% single phase.Metering : a) 3 ½ digit, ammeter / voltmeter b) micro controlled based time interval meterRange : 0-9.999 - 99.99 - 999.9-9999 sec selectable by a push button.Display : 4 digit LED Type.Protection : Fuse /MCB, Over current protection.

The UDEY SC-10 secondary current injector is a tester with rating of 100 Amp -1.8 kVA with built in timer. This will test instantaneous relays, IDMT relays, directional relays, moulded circuit breakers and meters. Current or voltage at each of the four main sets of a.c. terminals is continuously variable.

• Power Source: Electric
• Weight: 29 Kg
• Dimension: 15 * 12 * 8 Inches

• Channels: 10 Channel
•  :  
• Relay Voltage: 860 VA per channel
• Relay Current: 64 A

• Weight: 33 lb (15 kg)
• Megger: MS-2A
• Ground Fault Performance Testing for NEC: 230.95
• Input Voltage: 120 V OR 240 V,50/60 Hz,1
• Output Ranges: 0 to 240 A at 3 V Max.
• Ranges: 0 to 99.999 s,0 to 999.99 s,0 to 99999 cycles
• Accuracy: + - 0.005% of reading,+ - 1 digit
• Operating Modes: Memory,Normal
• Display Instrumentation Ammeter: 3 1 / 2 digit,extra-bright LED display with 0.3 in. (7.62mm) numerals
• Ranges Switch Selected: 0 to 1.999/19.99/199.9/750 A
• Standards: CE EN 61326-2-1,EN 61010-1,EN 61010-031
• Dimensions: 9.9 H x 14 W x 11 D in.,(25 H x 35 W x 28 D cm)
• Display: 5-digit,extra-bright,LED display with 0.3 in. (7.62mm) numerals

• Voltage: 230
• Weight: 5 kgs
• Frequency: 50/60
• Model Name/Number: SCS SCI1
• Material: MS IP55
• Tolerance: 10

The Relay Testing Equipment is a portable apparatus which is designed for checking the operating characteristic of protective relays on site. Ever present in every day operation of electrical power system is the possibility of the occurance of faults . Since a relay in the system is called into action to deal with a fault only once in a long while, its failure to operate correctly on that occasion means Severe damage to plant or waste of money spent on installation. Periodic Field testing is the best way of ensuring the integrity of the protective relays. But the position is complicated because of the fact that the protective relay is solely concerned with fault conditions and hence it cannot readily be tested under normal operating conditions.

relay test kit, Battery Charger, Electrical Rectifier, electrical stabilizer

Line Conditioners, High Voltage DC Test Set

Switchgear and Relay Test Set, Potentiometers and Effects Of Loading

Relay Test Set, 3 Phase Breaker Timer, electrical testing services

PW 460 Three Phase Relay Testing Kit, SCOT M3K Time Interval Meter

relay test sets, Insulation Testers, electrical test instruments

relay test kit, Earth Monitoring Relays, Plating Rectifiers, timer relays

Secondary Injection Relay Test Kit, Resistance Decade Box