Safety & Pressure Relief Valves Dealers in Midc, Mumbai

Application: Provide an economical means of protecting an hydraulic circuit against over pressurization. Operation: These factory preset valves are designed for maximum flow rate of 5 gpm. Furnished with 1/8" NPTF male port. All valves weigh 0.2 lb. See chart in 'Specifications' for ordering information. NOTE: Care should be exercised to protect workers from hot, pressurized hydraulic oil. Install these valves only in an enclosed or shielded area.

We offer clients plugs and bushings which are made from superior quality raw materials. our range of fittings are known for high-strength, less maintenance, excellent finish and longer life.

We are pressure relief valves and safety relief valve manufacturers with engineering expertise as per global standards. Industrial safety valves are extremely important equipment for clients dealing with pressurized systems. Our infrastructure and the resources are ideal to manufacture custom-made safety valves as per client specifications. With time, we have established ourselves as trusted safety relief valve and pressure relief valves manufacturers by catering to reputed clients throughout India and Bangladesh, and across the globe. Our safety relief valves and pressure relief valves are manufactured as per approved drawings under third party supervision. Brass valves, Carbon Steel valves and Stainless Steel (S.S.) are the variants available for the body of the valves. Neoprene or Teflon seats are used with an AISI – 304/410 Seat Holder. We manufacture two types of valves- Pop Action Type valves and Angle Discharge type valves. These valves are ideal for tank mountings or pipeline fitting. Our Pop Action safety relief valves internal mounting are used widely in storage and transport tanks. These valves can protect any enclosed pressurized LPG system. They can be also be used to relieve hydrostatic pressure in liquid lines with minimum loss. The standard model Angle Discharge Type valves come with a Carbon Steel body. These valves are generally used in Standard LPG / Propane tanks. The other applications of Angle Type Discharge valves include tanks for NH3, VCM, MMA, DMA and other liquefiable gases. Every plant requires a different kind of safety relief valve. The safety valves or pressure relief valves will need customization based on performance requirement or application areas. To meet the specification of the client’s plant, we custom-design the valves. Our clients can choose from a variety of sizes, materials and end connections to suit their needs. Our standard valves come with a particular set pressure. The pressure can be set to other values as required by clients. As trusted pressure relief valves and safety relief valve manufacturers, we provide our clients with all the necessary quality certifications that are required for the SRVs, from authorized certifying agencies. Sizes covered by our manufacturing range are ¼” (6 mm) to 6” (150 mm).

• Brand Name: New Engineering
• Usage: Industrial
• Valve Size: Variable
• Material: Aluminium, Brass/Bronze, Stainless Steel
• Pressure: High Pressure
• Media: Water, Powder/Solids, Air

• Size: 1/4

Fusible Plug is a heat sensitive, thermally operated, non-reclosing pressure relief devices to function by the yielding or melting of the special fusible alloy. Fusible plugs are manufactured using a special alloy & process that assures a leak free and safe operation. The sensing temperature of the fusible material is clearly marked on each fusible plug.

Auto Re-circulation on a Refueller to control the pumping pressure of Air Crafts. Solenoid Override or Pneumatic Override to safeguard the system. This can be operated remotely to re-circulate full flow. When installed in Main line, it prevents upstream pressure dropping below preset value. When installed on a By-Pass line, it controls main line pressure by relieving excess pressure in By-Pass/sump. Ideal for pump by pass to protect the downstream equipments Relief pilot (PR-610) is normally closed due to spring tension. With increase in upstream pressure above set value, Pilot (PR-610) opens which makes Main Valve to open fully. Spring Range: Standard: 20-200 psig. Optional: 5-30 psig. Size : 25NB - 400NB

Brassomatic Pressure Relief Valves have been designed for installation on pressure vessels containing gas and to provide positive instantaneous action with high volume discharge. All valves reach full volume within 10% of the setting. They are available with standard setting ranging from 100 psi to 650 psi. These valves are also available with special settings. The body is manufactured out of special brass with highly sensitive spring set at the desired pressure and sealed.   Size Available: ¼” to 1”

We are offering pressure regulating valve. Miniature series | service : air water sizes: 3 mm & 6 mm (g 18" & g14") flow: up to 22 scfm @ 7 kg cm2g regulator compact design high performance

• Material: Mild Steel
• Surface Finish: Zinc Plated
• High Frequency: 50 Hz
• Type: Pneumatic
• Packaging Type: Box
• Tensile Strength: 400 Mpa

We supply Pressure Relief Valves to our clients which are well in demand and have important application in various fields. It is a kind of safety device that relieves overpressure in a vessel or piping. We have a comprehensive range of these Pressure Relief Valves that are available at reasonable prices and are timely delivered to our clients. Applications : To relieve pressures through pipes, hosing, tubes or entire system

• Hydraulic oil, Water, Steam, Gas, Chemicals.: CS zinc plated and dichromated/Stainless steel/Brass in natural finish

We have wide range of square body ball valves in Carbon steel, Stainless Steel and Brass. Sizes from ¼” to 2” are available ex-stock with us. Large sizes can be custom made as per your needs. Pressure ranges from 1,000 PSI to 10,000 PSI. Our range includes 2-way, 3-way and 4-ways designs. Our Ball valves are available in a variety of end connections and also include flange end connections from 1.5” and above which conform to SAE and CETOP standards. Standard valves come with Buna or Viton seal but we can offer Teflon seals as well.

Valve consists of a body and shut off mechanism inside the body. Body has through axial holes of different diameters over the length. Lower part the hole is 8 mm in dia, the remaining part is of 22 mmin dia. (MOC – SS). The upper part of the body is provided with female thread for securing stem assembly and male thread for fastening the valveon the bottle. From one side and under the body there is a connection with male threads for attaching to the pipe lines. The shut off mechanism consist of valve assembly with a pad made of polyamide resin, stem assembly (MOC - MS), bushing (MOC – Gun Metal), gasket (MOC - Copper), spring (MOC – Case hardened steel) with packing . The stem assembly in its turn has a nut, stem, ball and pivot journal. Hand wheel assembly is fixed by nut on the square end of stem for opening and closing of the valve. The air leakage from the valve is prevented by a seal and made in movable and fixed joint. The movable joint of valve end and bushing are sealed by rubber rings. Valve assemblies have tested for the leak tightness by compressed air at a pressure of 400 kgf/cm² and hydraulic test for strength at a hydraulic pressure of 600 kgf/cm².

Pressure Reducing Valves protect household water installations for industrial or commercial applications within the range of their specification. By installing a pressure reducing valve, pressurisation damage is avoided and water consumption is reduced. The set pressure is also maintained constant even when there is wide inlet pressure fluctuation. Reduction of the operating pressure and maintaining it at a constant level minimizes flow noise in the installation.  Spring loaded pressure reducing valves operate by means of a force equalising system. The force of a diaphragm operates against the force of an adjustment spring. If the outlet pressure & therefore diaphragm force fall because water is drawn, the then greater force of the spring causes the valve to open. The outlet pressure then increases until the force between the diaphragm & the spring are equal again. The inlet pressure has no influence in either opening or closing of the valve. Because of this, inlet pressure fluctuation does not influence the outlet pressure.

Safety valves available for most applications such as steam, air, vapour & liquids. Valves are designed to meet the requirements of applicable a.s.m.e & api codes.

We Present to Customers a Superior Range of Pressure Relief Valves. Pressure Relief Valves are Used as a Safety Device to Avoid Harm or Damages Caused to Equipment, Piping and Its Allied Components Caused By Sudden Increase in Excessive Pressure. These Pressure Relief Valves are Fitted At the Discharge Line. the Pressure Relief Valves are An Adjustable Spring Loaded Valve. the Valve is Factory Adjusted for Set Pressure as Specified Originally or At 15 % Above the Rated Pump Pressure. Depending On Pipe Line Size and Flow Rates and Set Pressure, the Inlet and Outlet Sizes of the Pressure Relief Valves are Designed. features excellent Quality Adjustable Spring Loaded Efficient Working Wide Range applications prevent Equipment Damageas Safety Measures Control and Limit Pressure.

Amarama Engineers designs & manufactures spring loaded Pressure Safety Relief Valves which are installed to release the excess pressure developed in a system like reactor vessels, pipelines due to a chemical reaction, thermal expansion etc. Our full bore inlet design gives quick release of pressure and faster shut off on the return. Through our years of experience we have categorised our range of springs for different pressure and sizes of valves. The flexibility in our design helps us cater to different applications like corrosive vessels, utility, high pressure, temperature, hydrogenation, reactor jacket, bitumen blending & many more applications. For example, for corrosive we provide PTFE lined inlet nozzle and Hastelloy �C� plug, which ensures leakage class 6. We also assist our customers with the sizing and selection of Pressure Safety Relief Valves according to API 521.

Safety Valve, Gate Valve, Ball Valve, Piston Valve, Plug Valve

Safety Relief Valves, Slab Type Gate Valve, Mini Ball Valve

emergency relief valves, flame arresters, pressure vacuum relief valves