Resistance Meters Dealers in Marol, Mumbai

• 220V±10%, AC 50 Hz (120V±10% against order): 0to1999.9 µ
• 0.1 µ: 100A DC (MRL-11) 100-200A (MRL-22)
• 0.5 class: LCD
• Stores 100 test results: Built in printer
• <40º C. < 85% R.H.: Bag Mains cord. Flexible testing cable set with alligator clamps, 8 meter long. Operating Manual. Calibration certificate.
• MRL-11 37(L)x26.5(W)x22.5(H) cm: 37(L) x 28(W) x 12.5(H) cm
• MRL-11: 6 kg: 5 kg
• MRL-22: 37(L)x26.5(W)x22.5(H) cm: 37(L) x 28(W) x 12.5(H) cm
• MRL-22: 6 kg.: 5 kg

• Measuring range : 0 to 1999.9 μ Ohms: Resolution: 0.1 μ Ohms
• Test current: 100A DC: Measurement accuracy: 0.5 Class
• Display: LCD: Memory:Stores 100 test results.
• Built in printer.: Micro-controller operated
• Front panel with legend: Fuse protection for line short circuit

We are offering amps contact resistance tester, description: nmc hl-100 is a new generation, fully automatic, 4 terminal line loop contact resistance tester. The entire test is done automatically and quickly. Hl- 100 takes over; powers up the test current, takes the readings and displays the results on the lcd screen. Prints test results through its built-in printer. Test results can be saved in memory and can be recalled later. True portability is achieved by the lightweight (only 10 kg), single unit design housing the hl- 100. The hl- 100 is encased in an aluminum alloy cabinet. the advantages of hl-100 • automatic measure of contact resistance in 3 seconds • true 4 terminal measurement: high accuracy. No lead compensation required • test results saved automatically • recall and print last 100 test results • prints results on built-in printer applications: • measure rotating machine contact resistance • measure breaker element resistance • measure resistance of bus bar joints • locate poor connections.

Protective ground tester indispensable for safety standard certification Low resistance 0 to 1.8 Ω measurements Max. 31A testing current

Lance assembly designed and customizable Fluid bed Bottom spray (Wurster coating) nozzle helps to improve the wurster coating application and also makes it possible to attain high-quality results in coating pellets and particles.Designed for All type of Bottom Spray Coating, Allegiant spray distribution and fine droplets results in optimum quality of coating. Light weight design and easy to control the spray parameters. Minimum internal parts hence less maintenance.

• Earth Ground Resistance: 20/200/2000 ohm
• Usage: Industrial
• Weight: 750 g
• Dimension: 165 x 50 x 95 mm
• Storage Temp Range: 0-50DegC

We are the leading exporter and supplier of this products.

analog tester, DIGITAL VAF METER DT-36, ENERGY MANAGEMENT SYSTEM (EMS)

Description :-Megohmmeters are mainly used for testing the breakdown strength of electrical insulation. They generate high voltage and low current signals for conducting the test. These meters have derived their name from the fact that the insulating resistance of a properly designed product is expressed in megohms (MO).Salient Features:These synthesizers are widely used in many fields. Some of the areas where they find their application are: Provided with remote controls that can be controlled by computers or other instruments. There is a built-in calibration that enables operator to calibrate test instruments without removing them from the test location. Comes with warning indicator lights, which indicate pass or fail conditions and mostly work in association with audible buzzers or alarms. Megohmmeter devices are often interfaced with programmable logic controllers in automated test environments.M Supplied with a rapid cutoff circuitry for protecting electrical devices from excessively high levels of voltage or current. Have user-selectable output frequencies. These meters are also available with printer ports and scanner ports. These devices vary in terms of display and interface technologies

This cleanroom workbench consists of ESD safe worktable with ESD table attachment integrated with handheld instrument like multimeters, insulation testers and safety ohm meter, soldering and desoldering station and power supply. Also consisting of ESD bin holders, power sockets, safety and switch units and fume extractor, 10x magnifying glass- bench mounting type.

earth ground testers, Calibration Instruments, clamp meters

Fluke 1623-2 and 1625-2 GEO Earth Ground Testers, Fluke 374 Clamp Meter

clamp meters, Digital Multimeter, Insulation Testers, Power Analyzer

Automatic Transformer Winding Resistance Meter, tan delta system

Digital Low Resistance Ohmmeter, ground fault locator, relay test kit

Million Mega - Ohm Meter, frequency generator, On-Site Calibration Service