Resistance Meters Dealers in Military Road, Mumbai

Earth resistance measurements for multi-grounded systems Leak to load current True RMS

• Insulation resistance (IR): Absorption ratio (DAR) Test, save, recall,
• Internal rechargeable battery: 5-40 deg C / RH= max 70%
• Strong molded cabinet with cover: 28 x 21 x 10 cm approximate

Machine Feature Automatic-microcontroller operated Standard test voltages-0.5kV, 1kV, 2.5kV, 5kV Resistance range to 1TΩ Continuous digital display on LCM Test modes: Insulation resistance, PI (Polarization Index) AR (Dielectric Absorption Ratio) (PI and AR automatically calculated) High circuit: 3mA Visual indication of test voltage and output ON Data storage, data recall and real time + calendar data Backlit LCM with status and battery condition display Power source: Internal re-chargeable battery / AC mains Test Voltage 0.5 / 1 / 2.5 / 5 kV DC+/- 5% of rated value Voltage accuracy 5 Mohm to 1 Tera ohm I R range 5MΩ-999MΩ :+/-5%rdg +/-3 dgt1GΩ-9.9GΩ :+/-5%rdg +/-3 dgt10GΩ-99.9GΩ:+/-10%rdg +/-3 dgt100GΩ-1TΩ :+/-20%rdg   Standard Accessories Flexible testing leads with clamp of 4 metres length of yellow, black and red colour. Charger Earth Cable. Operating manual 1 no.  

• Brand Name: NMC

We are offering transformer winding resistance meter. The nmc 'tdr' is a high precision, new generation, light weight large output current and micro-processor controlled tester. This replaces old dc wheat stone bridge and double arm bridge for measurement of dc resistance. 'tdr' adopts new advanced test current power supply technology,four terminal measurement, digital display of resistance value and test current. 'tdr' ispowered by 220v ac mains single phase supply. The measurements are accurate as the test current is highly stable. High automation is achieved with automatic discharge warning. principle: the constant current generated is fed to the resistance under test through the current terminals and the voltage drop across the resistance under test is measured and displayed in ohms. A true four terminal measurement is used to eliminate the need for lead resistance compensation. features : >> constant current source>> saves 255 test results in memory>> built-in printer description: nmc 'tdr' is a new generation, digital resistance meter using 4 terminal measurement technique. Built in printer for printing results. The entire test is done quickly. 'tdr' generates constant current, powers up the test current, takes the readings, and displays the results on the lcd screen. The 'tdr' is encased in an aluminum alloy cabinet. 3 models available : tdr-10 , tdr-20 , tdr-40.

Description :-Megohmmeters are mainly used for testing the breakdown strength of electrical insulation. They generate high voltage and low current signals for conducting the test. These meters have derived their name from the fact that the insulating resistance of a properly designed product is expressed in megohms (MO).Salient Features:These synthesizers are widely used in many fields. Some of the areas where they find their application are: Provided with remote controls that can be controlled by computers or other instruments. There is a built-in calibration that enables operator to calibrate test instruments without removing them from the test location. Comes with warning indicator lights, which indicate pass or fail conditions and mostly work in association with audible buzzers or alarms. Megohmmeter devices are often interfaced with programmable logic controllers in automated test environments.M Supplied with a rapid cutoff circuitry for protecting electrical devices from excessively high levels of voltage or current. Have user-selectable output frequencies. These meters are also available with printer ports and scanner ports. These devices vary in terms of display and interface technologies

Lance assembly designed and customizable Fluid bed Bottom spray (Wurster coating) nozzle helps to improve the wurster coating application and also makes it possible to attain high-quality results in coating pellets and particles.Designed for All type of Bottom Spray Coating, Allegiant spray distribution and fine droplets results in optimum quality of coating. Light weight design and easy to control the spray parameters. Minimum internal parts hence less maintenance.

Dry Arc Resistance Tester is designed to conduct high voltage, low current arc Resistance test on solid electrical insulation material .   Features Dedicated PLC system for control of sequence and user friendly. Key Board with soft keys for entering the testing parameter. Test chamber with DOOR INTERLOCK System to protect user from direct contact of HIGH VOLTAGE. LCD Display to set test parameters / read test results. Exhaust fans in – built in the test chamber to remove fumes Adjustable test jig to hold different test samples of various dimensions Enclosure – Elegant design with Aluminum extruded profile.   Specification   Input Supply Voltage 230 V +/- 10 % Test Voltage 0 – 12.5 kV adjustable (max 15 kV) Dedicated PLC system for control of sequence and user friendly Weight: Approximately 140 kg Approximate Dimensions: 900 mm width, 600 mm depth, 700 mm height

This cleanroom workbench consists of ESD safe worktable with ESD table attachment integrated with handheld instrument like multimeters, insulation testers and safety ohm meter, soldering and desoldering station and power supply. Also consisting of ESD bin holders, power sockets, safety and switch units and fume extractor, 10x magnifying glass- bench mounting type.

earth ground testers, Calibration Instruments, clamp meters

clamp meters, Digital Multimeter, Insulation Testers, Power Analyzer

analog tester, DIGITAL VAF METER DT-36, ENERGY MANAGEMENT SYSTEM (EMS)

Digital Low Resistance Ohmmeter, ground fault locator, relay test kit

Automatic Transformer Winding Resistance Meter, tan delta system

Fluke 1623-2 and 1625-2 GEO Earth Ground Testers, Fluke 374 Clamp Meter

Million Mega - Ohm Meter, frequency generator, On-Site Calibration Service