Retaining Ring Dealers in Mumbai

• Size: Multisizes
• Type: Back Up Ring
• Material: Rubber
• Shape: Round
• Color: Available In Different Colors
• Feature: Fine Finishing
• Finishing: Non Polished

Steam joint rings are used in rotary pressure joints. These seal rings effect flow of hot liquid or steam from a stationary supply pipe to a rotating machine part. Such machineries like rubber mixing roller mills, calendaring machines and cylinders are used in paper and textile industries as well as in plastics, chemicals and other industries for similar application.  

Retaining Ring The most common form of radially fitted circlips for shafts with grooves. Provide a large shoulder on a relatively small shaft diameter.

We at Accurate Springs have mastered the art of manufacturing Retaining Rings. Retaining Rings is often an alternative means of sealing components in assemblies from contamination. Since they are produced from metal {not rubber, or other non metallic material} retaining rings can often withstand higher temperature and more corrosive environments and other more extreme conditions than common O-Rings or conventional rubber seals. This is the primary reason why design engineers prefer retaining rings in many applications. Retaining rings offer higher clamping force when installed in the bore or on the shaft and are suited for higher operating speeds having 3600 [no axle gap} contact. One typical application is where high amount of dirt and dust are present and the ring sets provide the necessary seal against contamination from outside elements. Retaining rings are also used to protect contacting radial seals, rubber seals, o-rings and other oil seals.

We offer different type of Back up rings which are used for holding arm of cable during termination. Back-up rings are used to hold the arm our of the cable during execution of the joint/ termination. Ideal offers different types of back-up rings i. E straight through, spilt type etc. In various sizes. Ideal also offer the same as per customer requirements and specifications.

Hard rubber molded contoured Back-Ups are routinely produced in a 90 durometer Nitrile and Viton. This provides sufficient elasticity to permit stretching over the major diameter of a piston and then snapping back into the gland groove cut into the piston. 90 durometer has sufficient hardness to resist extrusion of the softer elastomeric O-Ring performing the actual sealing function against the high pressure liquid or gas. Back-up Rings are used in conjunction with O-rings and seals for both static and dynamic sealing applications. They prevent extrusion of the O-ring or seal when it is subjected to high pressure, and/or larger extrusion gaps. The back-up ring should be used on the opposite pressure side of the seal. For seals that are exposed to pressure from both sides, two back-up rings should be used, one on each side of the O-ring or seal.

Applications: For sealing steam, hot water or heating oil feeds to rotating cylinders or drums Features: Textile Rubber Sugar Food processing Paper industry

Backup rings prevent extrusion "O" rings In high pressures usually above 1500 PSI & compensate for loose fitting components. One backup ring should be used on each side of the o ring in double acting assemblies if possible two backups should be used even in single acting assemblies. If only one backup ring is used, the "o rings should be placed between the pressure source & the backup ring. Contact us for more information on backup rings.

Steam joint rings are used in rotary pressure joints. These seal rings effect flow of hot liquid or steam from a stationary supply pipe to a rotating machine part. Such machineries like rubber mixing roller mills, calendaring machines and cylinders are used in paper and textile industries as well as in plastics, chemicals and other industries for similar application

• Type: Retaining Ring
• Material: Aluminium, Brass, Copper, Iron, Metal, Stainless Steel
• Color: Black, Golden, Green, Grey, Grey-Golden, Metallic, Shiny Silver
• Surface Finishing: Polished, Power Coated
• Feature: Accuracy Durable, Auto Reverse, Dimensional, Hardend & Temper, High Quality, High Tensile

• Thickness: 1.0 mm to 100 mm
• Size: ID 6.0 mm,OD 800 mm
• Ph Range: 0 to 14
• Density: 1.3 gm/cc,1.8 gm/cc
• Pressure: 300 bar
• Speed: 30 m/s

Back up ring In high pressures usually above 1500 PSI & compensate for loose fitting components.One backup ring should be used on each side of the o ring in double acting assemblies if possible two backups should be used even in single acting assemblies. If only one backup ring is used, the "o rings should be placed between the pressure source & the backup ring.

Back-up Rings are used in conjunction with O-rings in both static and dynamic sealing applications, PTFE Back-up Rings are used to prevent the O-ring from entering the clearance gap, when high pressures are exerted on the O-ring, its soft rubber material can be forced into the clearance gap causing the O-ring to extrude, PTFE Back-up rings keep the O-ring material from flowing into the gap which will prevent premature failure. PTFE Back-up Rings are made in single turn "scarf cut", Spiral "multi-turn", and solid "uncut" Back-up Rings and PTFE products including Piston Rings, Washer, O-Ring, V-Seals, Balls, Valve Seats, Wipers, Wear Rings, Bearing , Rod Guide and custom parts in wide variety of polymer products in PTFE, PTFE Filled Compounds and many combinations of high-performance materials ideally suited for use in original equipment and industrial maintenance

spacer rings, Sheet Metal Component, Rubber Seals, rubber oring seals

Locking Retaining Rings are ideal for applications that have high rotational requirements. This feature allows the ring to function properly at speeds that exceed the recommended rotational capacity. The self-locking option can be incorporated for both external and internal rings.

backup ring, Single Axis Robots, Spherical Roller Bearings

Retaining Ring, timing belt tensioner, Petrol Engine

Retaining Ring, Industrial Condensers, Oil Coolers

back up ring, Ptfe O Rings, V Rings, Washers, Gaskets, Bellows

Retaining Ring, Pre Load Wave Washers, shaft ring, Shafts V Ring

Steam joint rings, Carbon Ring for Submersible Water Pump, Coating Pan

Retaining Ring, Clamps for Automotive Work, Spring Ring, Spring Bushes

Grip Retaining Ring, Wave Springs, solid dowel pin, E Type Circlips

Backups Rings, O-Ring Boxes, fabric oil seals

industrial retaining rings, Bolts, Electronic Components, Industrial Nuts

Backup Rings, Rubber Product, hoses pipes, Oil Seal, Ptfe O Rings