REX SEALING & PACKING INDUSTRIES PRIVATE LIMITED Byculla, Mumbai, Maharashtra

We are offering our clients with ri -117- white dry asbestos packing for general purpose steam and insulation packing for hot gases, ovens autoclaves etc. Our product confirms is spec .4687/ 1968 /1980. Also caulking, thermal insulation, furnace joints, exhaust pipe lagging and for ductings. The packing has considerable endurance power at varying temperatures and pressures. product features: high power durable

Brand Name : REX

We are offering Ultra Pure Graphite fiber Packing - RI - 650. A 100% Pure graphite packing designed for extreme applications of High Temperatures and aggressive media. Manufactured using a premium grade of 100% high graphite Fibers treated with high temperature lubricant. This design Ensures excellent heat conductivity, low friction, high Temperature resistance resulting in Lower shaft wear. Service Conditions: Acids, Alkalis, oil, solvents, steam, Thermicfluid pumps, hot tar pumps, refinery services, etc. RI-650 pH: 0-14 Temp°C: -250 to +650 Pr. Bar: 350 Velocity: 0-12 ms Density: 1.4 to 1.6 gcm² Size mm: 3 to 50

Brand Name : REX

We are offering lubricated packing, graphited cotton gland packing. the packing is braided with cotton yarn and then it is hot impregnated with special impregnate and graphited. This is a popular & economical packing in common use. It is characterized by good flexibility. It is resistant to water, dilute acids & alkalies, organic compounds, oils and greases.

We are offering ri - 144 - tiwa packing p.t.f.e. Impregnated asbestos packing. owing to our wide experience in this industry we are providing our clients ri-144-tiwa packing p.t.f.e impregnated asbestos packing. In the process of its manufacture, every single yarn is impregnated with high grade lubricant and superior quality graphite in square or round section. moreover our products are especially recommended for viscous and abrasive liquids. we also customize our product according to the clients’ specifications. salient features: superior quality high quality.

Brand Name : REX

We are offering tanged graphite sheet.high quality graphite sheets and gaskets have excellent resistance to chemical, air, water, oil, fuel, etc. They have a built – in anti stick property hence using the product solves the problem of adhesion to the flanges. Due to 98% graphite content and 1% corrosion inhibitor, this material can be used at high temperatures and for all acids and alkalis. This is not recommended for use with nitric acid.

Brand Name : REX

We are offering Synthetic PTFE fiber packing - RI - 11 This packing is manufactured using synthetic PTFE yarns, they are suited for Low pressure in Food and pharmaceutical Industry Service Conditions: Clean water handing pumps & valves, Food, Chemicals and pharma industries. RI- 11 pH=0-14 Temp °C=-200 to +250 Pr. Bar=200 Velocity=0-20m/s Density=1.4 to 1.6 g/cm² Size mm=3-50.

Brand Name : REX

We offer steam jointing sheet, gasket sheet - compressed non asbestos fiber. Suitable for use with gases, water, low pressure steam & dilute acids & alkailies. max. Short term service temp.: 400ã�â°c max. Continuous service temp.:250ã�â°c max. Operation temp, for steam : 180ã�â°c max operating pressure in bar - 35.

We are offering steam jointing sheet, gasket sheet - compressed asbestos fiber (caf). steam jointing sheet - compressed asbestos suitable for use with gases, water, low pressure steam & dilute acids & alkailies. temperature : 400°c pressure : 35 kg sq.cm compressibility : 8-11 % density : 1.9 gcc tensile : 12 mpa.

Brand Name : REX

We offer special oil jointing sheet - compressed non asbestos. general purpose for oils,solvents, water, steam, gases, dilute acids & alkalies, glycols & aqueous solutions max. Short term service temp.: 450°c max. Continuous service temp.:250°c max. Operation temp, for steam : 250°c max operating pressure in bar - 150

Brand Name : REX

We offer special oil jointing sheet, gasket sheet -compressed asbestos fiber (caf). general purpose for oils,solvents, water, steam, gases, dilute acids & alkalies, glycols & aqueous solutions. temperature : 580â°c pressure : 150 kg sq.cm compressibility : 7-11 % density : 1.7 gcc tensile : 15 mpa.

Brand Name : REX

We are offering lubricated and graphited asbestos.our clients with high quality lubricated and graphited general purpose asbestos glad packing for medium temperature and pressure conditions which confirms to is spec. 4687 / 1968 / 1980. Our product self lubricating compression gland packing made out of combination of ptfe and graphite and treated with high temperature inert lubricant, to enhance lubricity & heat dissipation. prominent features: reliable cost effective

We are offering lubricated and graphite. We are one stop destination for all kinds of ri - 135 - special lubricated & graphited asbestos packing. Our product is s special quality lubricated and graphited asbestos gland packing for high temperature and pressure conditions which confirms to is spec. 4687 / 1968 / 1980. This packing, constructed from high tensile strength ptfe yarn, incorporates high quality graphite particles for better heat transfer. the constituents impart improved thermal conductivity heat dissipation, lubricity, and low thermal expansion and low coefficient or friction. product features: high tensile strength high quality graphite

We are offering silicone tape. high grade silicone rubber bonded to fiberglass tape rex silicone tape is designed to protect hoses, wires and cables from the hazards of high heat and occasional flame. It protects continuously to 260 °c / 500 °f and will withstand a molten splash at 1200 °c / 2200 °f. Made of knitted fiberglass yarns in a flexible substrate, it is then coated with a high grade silicone rubber. resistant to hydraulic fluids, lubricating oils and fuels, rex silicone tape insulates against energy loss in piping and hosing, protects employees from burns and allows “bundling” of wires, hoses and cables.

We are offering silicone coated cloth. technical specifications : temperature=1050 deg. C short term 850 deg. C continuous thickness of fabric=1.6 mm silica fibre=0.7 mm fire proof coating=0.9 mm acid, alkali, solvent, steam, water, dust resistant coating=0.2 mm nitrogen content=nil emission of nitrides on burning nil high range of dielectric strength=1.5 kv to 12 kv standard packing size=1000 mm width x 50 mtr. Length

Brand Name : REX

Characteristics Of Silica Products: Continuous Temperature : 1000C Melting Temperature : 1650C Typical Applications: Induction heating furnace coil insulation Coke oven door seals Cable and wire insulation (electrical and thermal) Infrared radiant diffusers Fuel line insulation Flange covers Pipe hanger insulation Furnace curtains Gasket and wrapping material Available Sizes For Silica Tape Thickness : 0.4mm, 0.8mm Width : 20.00mm t0 1000.0mm Available Sizes For Silica Cloth Thickness : 0.4mm, 0.8mm Width : 1000.0mm

Brand Name : REX

We are offering silica cloth. characteristics of silica products: continuous temperature : 1000c melting temperature : 1650c typical applications: induction heating furnace coil insulation coke oven door seals cable and wire insulation (electrical and thermal) infrared radiant diffusers fuel line insulation flange covers pipe hanger insulation furnace curtains gasket and wrapping material available sizes for silica tapes thickness : 0.4mm, 0.8mm width : 20.00mm t0 1000.0mm available sizes for silica cloth thickness : 0.4mm, 0.8mm width : 1000.0mm

Brand Name : REX

Brand Name : Rex Sealing

We are offering removable insulation jackets, reusable insulation jackets. we manufacture for our clients premium quality removable and reusable insulation jackets and pads. These insulations are used as a packing material and protect the goods from temperature variations. our product is highly durable and is highly appreciated by the clients for its reliability and long service life. They are easy to use and are designed using premium grade raw material procured from known and verified dealers. product features: easy to use premium quality

Brand Name : REX

We are offering refractory ceramic fiber (rcf) paper. rex rcf paper is produced from alumina- silicate fibers with the minimum addition of carefully selected bonds, which burn out cleanly in service. rcf paper has low shrinkage, good handling strength, and low thermal conductivity. It contains a small amount of organic binder for processing which makes it flexible, and reduces off-gassing and odor during use. rex rcf paper has highly uniform structure due to its controlled basis weight and thickness, assuring homogeneous thermal conductivity and a clean, smooth surface ideal for gasket or sealing. its flexibility allows it to be wrapped or rolled to fit most complex configurations. advantages •high flexibility •good resistance to tearing •precise thickness •resistance to thermal shock •very low thermal conductivity color : white temperature range : 1260ºc continuous 1800ºc melting point thickness : 1~10mm sizes available : 500 mm width x 1000 mm length 1000 mm width x 1000 mm length.

Type : Paper

Shelf Life : 2years

Color : White

We are offering pure ptfe packing. this is braided from pure ptfe fibres this packing designed to withstand all types of chemicals under severe conditions. service conditions: f00d-grade applications where contamination must be avoided. Seals concentrated acids, alkalis, corrosive gases and pharmaceutical industries. technical specifications : temperature -225°c to 275°c ph range 0-14 pressure upto 350 bar velocity 0-20 m/s density 1.4 to 1.6 g/cm2.

We are offering Pure Graphite Packing with Inconel Wire Reinforced - RI - 181. This is braided from Pure Graphite fibers and then reinfocred with Inconel Wire. This packing is non-corrosive, self lubricating and gives frictionless sealing providing good life to the packing and Sleeve. Service Conditions: Acids, Alkalis, Oils, recommended for High Pressure Steam applications. Not suitable for Nitric acid. RI- 181 pH=2-14 Temp °C=-200 to +600 Pr. Bar=300 Velocity=0-15 ms Density=0.9 to 1.3 gcm² Size mm=3 to 50.

Brand Name : REX

We are offering Pure Graphite Packing - RI - 18. This is braided from Pure Graphite fibers. This packing is non-corrosive, self lubricating and gives frictionless sealing providing good life to the packing and Sleeve. Service Conditions: Acids, Alkalis, Oils, recommended for High Pressure Steam applications. Not suitable for Nitric acid. RI- 18 pH=2-14 Temp °C=-200 to +600 Pr. Bar=300 Velocity=0-15ms Density=0.9 to 1.3 gcm² Size mm=3 to 50.

Brand Name : REX

We are offering pure graphite.this is braided from pure graphite fibres. This packing is non corrosive, self lubricating and gives frictionless sealing providing good life to the packing and sleeve. Service condition: acids, alkalis, oils, recommended for high pressure steam applications. Not suitable for nitric acid. technical specifications : temperature -2000c to 6000c ph range 02/14/11 pressure upto 300 bar velocity 0-15 m/s density 0.9 to 1.3 g/cm2

Brand Name : REX

We are offering Pure carbon with Graphite Packing- RI- 612. This gland packing is made from combination of Pure Carbon Fibers and Flexible Graphite yarns with Carbon fibers at the Corners and flexible graphite yarns at the core and face of the gland packing. This combination provides excellent flexibility and Compressibility. This packing is designed for High Temperatures, chemicals and for valve applications. RI- 612 pH=0-14 Temp °C=-200 to +600 Pr. Bar=350 Velocity=0-20ms Density=1.4 to 1.6 gcm² Size mm=3-50.

Brand Name : REX