RF Passive Components Dealers in Andheri, Mumbai

Our company is one of the credible Manufacturers, Exporters & Suppliers of Hybrid Resistors (Custom Built) from Maharashtra, India. We are capable of customizing the Hybrid Resistors according to the specifications provided by the customer. We can be relied upon for swiftly delivering the Hybrid Resistors (Custom Built) to domestic and international markets.   Features : Resistance tolerance from 1% to 10% Low induction High stability Divider available

SOC Edge wound Resistors are designed and built to meet the most demanding mechanical and electrical requirements in the industry. They are constructed of flat stainless steel electrical alloy, wound on its edge to form a helical resistive element. The element is then mounted on solid porcelain cores. Welded terminals at both ends of the resistor provide the means of connection and terminations.

The company is one of the leading Importers and Suppliers of Multilayer Surface Mount Inductor in Mumbai (India). Offering the Multilayer Surface Mount Inductor as per the specific requirements of the clients, the company makes a conscious effort to deliver the best every time. The Multilayer Surface Mount Inductor, offered by the company, is widely demanded throughout the country. Features Of Multilayer Surface Mount Inductor : Ferrite chip inductorFerrite chip beadTransient voltage suppressorMonolithic chip varistorsHigh frequency ceramic chip inductor

Capacitor Box L&T Standard Duty Capacitors are metalized polypropylene capacitors from 1kVAr to 25kVAr in cylindrical configuration and 5-50kVAr in box type configuration. These capacitors come with a stacked winding and are impregnated with a biodegradable soft resin. These capacitors are self healing type. The Capacitors come with an over pressure disconnector and finger proof terminals. They can be used to provide effective power factor correction in industrial and semi industrial applications.

• Brand Name: TAGLab

We are offering potentiometers and effects of loading tlc019. Ten turn potentiometers of different values with turn - count knob resistive loads for loading the potentiometers loaded output voltage vs rational angle of potentiometer shaft & loading error vs rational angle graphs calculation of loading error.

• SERIES: PL2S

I potenziometri lineari della serie PL2S trasformano i movimenti meccanici lineari in corrispondenti segnali elettrici; precisi, robusti ed affidabili, soddisfano ogni esigenza di misura e controllo di posizione sulle macchine operatrici di qualsiasi tipo e settore produttivo. Gli snodi sferici alle estermità consentono il fissaggio in aria del potenziometro, permettendo di compensare eventuali lievi disassamenti nell’applicazione.

• Material: Ceramic (Tube)
• Frequency: 50 Hz
• Voltage: 220 V
• Rated Power: 1000 W
• Features: Durable, Good quality, Low maintenance
• Maximum Operating Temperature: 50 Degree Celsius
• Brand: GV RESISTORS
• Dimensions: 407 mmx 76 mm
• Length: 16 inch
• No of Tube: 1

We offer shunts. Shunts are precision parts commonly used for measuring current in KWH in Electronic meters. Precision shunts are also used in electric vehicles and other applications like invertors, etc.

• Machine Feature: Digital display ,One tester for AC and DC ,Saves set up time

• Type: Linear Potentiometer
• Certification: CE Certified
• Application: Automotive Use
• Color: Grey
• Voltage: 0-100VDC
• Condition: New
• Frequency: 50Hz, 60Hz
• Driven Type: Battery
• Feature: Auto Controller
• Temperature: -25 +85deg C

We are offering miniature capacitors. Type case capacitance range (in pf) voltage (in wvdc) mdm6 1 to 120 100 to 500 mdm7 130 to 1200 100 to 500

We also manufacture and market a comprehensive range of high quality electronic energy meters and numerical protective relays for utilities, industries, commercial establishments and individual users.

• Reference IS: IS 13340 / 2012.
• Output Range: 1 Kvar to 25 Kvar single units & above 25 Kvar in Banking.
• Working Voltage: 415 to 1000 Volts AC.
• No. of Phases: Single / Three.
• Temp. Category: 55 Deg. C Max.
• Capacitance Tolerance: 0 %  to   + 10 %
• Permitted Over Voltage: 1.1 Times of rated voltage
• Permitted Over Current: 1.1 Times of rated current.
• Frequency : 50 Hz.
• Losses: < 0.50 w / kvar
• Cooling: Natural air + Oil Cooling.
• Installation : Indoor, Floor Mounting
• In-rush Current: 100 times of rated current.

electronic laminated chokes, industrial laminated chokes

The filter circuit of Common Mode Inductance: La and Lb are common mode inductance coils. The two coils are wound around the same core, with the same number of turns and phases (the winding is reversed). When the normal current flows through the common-mode inductance, the current in the same phase winding inductance coil generates reversed magnetic fields, and then the reversed magnetic fields cancel each other out. At the moment, the normal signal current is mainly affected by the coil resistance (and a small amount of damping caused by leakage); When the common-mode current flows through the coil, as a result of the same direction of common-mode current, there will produce same direction magnetic field in the coil and increase the coil impedance, which will make coil performance for high impedance and produce stronger damping effect, by this to damp common-mode current and achieve the goal of filtering. In fact, the filter circuit is connected to the interference source at one end, the other end is connected to the interference device, then La and C1, Lb and C2 constitute two sets of low-pass filters; Then the common mode EMI signal will be controlled at a very low level. The circuit not only can control the incoming of EMI signal, but also can attenuate the EMI signal generated by the line itself, which can effectively reduce the EMI interference strength. Now a small domestic common mode inductors, with the use of high-frequency noise suppression measures, common mode choke coil structure, its signal will not damp. Such small common mode inductor is also with the advantages of small size, easy of use, good balance, high quality and so on. It is widely used in double balanced tuning devices, multi-frequency transformers, impedance transformers, balanced and unbalanced transformers etc.　 Features High initial permeability and high AL value High effective insertion loss and excellent noise suppression Wide frequency range, large adjustable range for permeability （µ0）from 20000～160000 Low core loss，small choke size for volume and weight with epoxy coating Application Switched-mode Power supplies Common Mode noise suppression Precision equipment protection Power grid EMI harmonic filtering Other EMC application areas EMI common mode fliter Single-phase or three-phase power lines

Carbon Resistor, Ceramic Resistor, Chassis Mounted Resistor, Current Sense Resistor, Film Resistor, Metal Foil Resistor, Metal Oxide Resistor, Wirewound Resistor, Variable Resistor (Rheostat,Potentiometer) and Load Banks.  

• Country of Origin: India
• Type: Power Inductor
• Application: Industrial Use
• Color: Brown
• Voltage: 110V
• Condition: New
• Power: 1-5kw
• Driven Type: Electric

Used in low frequency power supplies as filter chokes, filter circuits, common mode chokes, noise suppression, and high frequency power supplies. Our products include: Fixed Inductors Shielded Inductors Torodial Inductors Air Core Powdered Iron Core Ferrite Core Common Mode Power Line Chokes Filters

Aluminum Electrolytic Capacitors, multilayer ceramic capacitors