RF Passive Components Dealers in Military Road, Mumbai

3 operating modes 100mA source and load 24V line mode 0.02% accuracy Safety terminals Battery level indicator Supplied with protective cover

• Machine Feature: Digital display ,One tester for AC and DC ,Saves set up time

We are leading manufacturer of rotary sliding type rheostats. in singel tube , double tube and 4 tubes ganged rheostats .

We offer shunts. Shunts are precision parts commonly used for measuring current in KWH in Electronic meters. Precision shunts are also used in electric vehicles and other applications like invertors, etc.

• Brand Name: OMEGA resistors
• Max. Resistance: 0.05Ohms
• Max. Current Rating: 3.5Amp
• Country of Origin: Made in India
• Features: Easy to mount, High current rating, RoHS Compliant.
• Resistance: 0.05 Ohms

• Brand Name: TAGLab

We are offering potentiometers and effects of loading tlc019. Ten turn potentiometers of different values with turn - count knob resistive loads for loading the potentiometers loaded output voltage vs rational angle of potentiometer shaft & loading error vs rational angle graphs calculation of loading error.

For applications that require faster deceleration rates, or where motor speeds are exceeding the synchronous speed set by the output frequency of the drive (an overhauling load condition) viz. Lifts & Elevators, Cranes, Conveyors, etc., a braking resistor is required. The purpose of a dynamic braking resistor is to slow down or to quickly stop a motor by draining excess voltage and keeping it within safe tolerances.

• Type: Linear Potentiometer
• Certification: CE Certified
• Application: Automotive Use
• Color: Grey
• Voltage: 0-100VDC
• Condition: New
• Frequency: 50Hz, 60Hz
• Driven Type: Battery
• Feature: Auto Controller
• Temperature: -25 +85deg C

Movable oven with a maximum temperature of 200° C Exclusive docking system between oven and antechamber prevents any ambient air exposure Fully automated transfer between oven, cooling antechamber, glove box, and discharge chambers Cooled antechamber reduces energy use and speeds productivity One glove box used sequentially with multiple ovens saves capital cost Best for small batches of various samples

The company is counted among the major Importers and Suppliers of Wire Wound Surface Mount Inductor in Mumbai (India). The Wire Wound Surface Mount Inductor is available in the market at cost effective prices. The Wire Wound Surface Mount Inductor can be customized as per the requirement and specifications of the clients. The company offers a quality range of the Wire Wound Surface Mount Inductors. Features Of Wire Wound Surface Mount Inductor : CMCA type common mode chokesChip inductorsSMD power inductorsChip inductors molded type

SOC Edge wound Resistors are designed and built to meet the most demanding mechanical and electrical requirements in the industry. They are constructed of flat stainless steel electrical alloy, wound on its edge to form a helical resistive element. The element is then mounted on solid porcelain cores. Welded terminals at both ends of the resistor provide the means of connection and terminations. Features SOC uses special porcelain cores designed for through bolt or flat bar frame mounting. This makes SOC Edge wound Resistors directly interchangeable with most major brand manufacturers of Edge wound Resistors. Elements are also available with CE Marking. Application Our Edge wound Resistor is the best you can buy for areas where vibration is a problem. Ideal for Hundreds of applications, this resistor is especially well suited for:

• SERIES: PL2S

I potenziometri lineari della serie PL2S trasformano i movimenti meccanici lineari in corrispondenti segnali elettrici; precisi, robusti ed affidabili, soddisfano ogni esigenza di misura e controllo di posizione sulle macchine operatrici di qualsiasi tipo e settore produttivo. Gli snodi sferici alle estermità consentono il fissaggio in aria del potenziometro, permettendo di compensare eventuali lievi disassamenti nell’applicazione.

The filter circuit of Common Mode Inductance: La and Lb are common mode inductance coils. The two coils are wound around the same core, with the same number of turns and phases (the winding is reversed). When the normal current flows through the common-mode inductance, the current in the same phase winding inductance coil generates reversed magnetic fields, and then the reversed magnetic fields cancel each other out. At the moment, the normal signal current is mainly affected by the coil resistance (and a small amount of damping caused by leakage); When the common-mode current flows through the coil, as a result of the same direction of common-mode current, there will produce same direction magnetic field in the coil and increase the coil impedance, which will make coil performance for high impedance and produce stronger damping effect, by this to damp common-mode current and achieve the goal of filtering. In fact, the filter circuit is connected to the interference source at one end, the other end is connected to the interference device, then La and C1, Lb and C2 constitute two sets of low-pass filters; Then the common mode EMI signal will be controlled at a very low level. The circuit not only can control the incoming of EMI signal, but also can attenuate the EMI signal generated by the line itself, which can effectively reduce the EMI interference strength. Now a small domestic common mode inductors, with the use of high-frequency noise suppression measures, common mode choke coil structure, its signal will not damp. Such small common mode inductor is also with the advantages of small size, easy of use, good balance, high quality and so on. It is widely used in double balanced tuning devices, multi-frequency transformers, impedance transformers, balanced and unbalanced transformers etc.　 Features High initial permeability and high AL value High effective insertion loss and excellent noise suppression Wide frequency range, large adjustable range for permeability （µ0）from 20000～160000 Low core loss，small choke size for volume and weight with epoxy coating Application Switched-mode Power supplies Common Mode noise suppression Precision equipment protection Power grid EMI harmonic filtering Other EMC application areas EMI common mode fliter Single-phase or three-phase power lines

Tantalum Capacitor, Ceramic Capacitor, Film Capacitor, Mica Capacitor, Aluminum Electrolytic Capacitor, HV & HT Capacitor.

• Capacitance Range: 40 mfd To 500 mfd.
•  :  
•  : Rated Voltage
• 230 Volts RMS.: Surge Voltage
• 75 To 350 RMS.: Operating Temp.
• -30 To +70 deg Celsius: Duty Cycle
• 20 starts / hour max of 3 sec. duration: Shelf Life

The capacitor start motor is the most widely used among various types of single phase motors. Connecting a capacitor in series with the starting winding achieves the starting torque with a lower starting current leading to a torque that is higher than other types of single phase motors like the shaded pole type. Thus, for machines which have a heavy starting duty, these capacitors are ideal. A capacitor – start motor comes with a centrifugal switch which automatically disconnects the auxiliary winding when motor attains a pre – determined speed. Hence, it works only with the help of the main winding. A capacitor connected to a motor develops a higher voltage across it than that applied to the motor. Hence, designing the Motor start capacitor is more important. “YASHA” motor-start capacitors are robustly built as compared to general purpose capacitors available in market as well as they are designed for HEAVY DUTY usage. They are built for motors where Voltage across terminals goes beyond 275 Volts and surge voltage can go up to 350 Volts. Of course at their rated voltage of 230 V and 275 V surge, they gives an even longer life span.

Capacitor Box L&T Standard Duty Capacitors are metalized polypropylene capacitors from 1kVAr to 25kVAr in cylindrical configuration and 5-50kVAr in box type configuration. These capacitors come with a stacked winding and are impregnated with a biodegradable soft resin. These capacitors are self healing type. The Capacitors come with an over pressure disconnector and finger proof terminals. They can be used to provide effective power factor correction in industrial and semi industrial applications.

Wire Wound Rheostats, Wire Wound Resistors, high wattage resistors

We also manufacture and market a comprehensive range of high quality electronic energy meters and numerical protective relays for utilities, industries, commercial establishments and individual users.

copper chokes, mystique lamps, Cfl, Halogen, electronics transformer

Passive Component, electromechanical devices, Electronic Component

We are offering metal clad capacitors. Type sci 101 swm 602 capacitance 5pf to 1000 pf 5pf to 200pf tolerance ±0.25pf,0.5pf,1%, 2%,5%,10%,20% ±0.25pf,0.5pf,1%, 2%, 5%, 10%, 20% working 500vdc 5 pf to 490pf voltage 300vdc 500pf to 750pf 5pf to 120pf 100vdc 500pf to 1000pf 120pf to 200pf dimensions (max.) as per fig.1 as per fig.2 with standing voltage 200% of rated voltage for 1 to 5 seconds with surge current not fxceeding 50 ma tangent delta 1 to 30 pf ------

Capacitive Voltage Divider, Arc Chamber Tube, Epoxy Cast Housing

We are well known for exporting of wide variety of high voltage ceramic capacitors

A prominent supplier of huge range of High Frequency Inductors.

multilayer ceramic capacitors, Aluminum Electrolytic Capacitors

electronic laminated chokes, industrial laminated chokes

electric chokes, Constant Voltage Transformer, electrical rectifiers

Power inductor