Ribbon Blender Dealers in Marol, Mumbai

The Mass Mixer is ideally suitable for mixing of wet mass, dry powders with wet mass, etc. for the preparation of pharmaceutical mass for the preparations of tablets.   Salient Features: The trough design is such as to evenly distribute the material throughout. The unique blade design and placement facilitate in the mass moving completely from top to bottom and laterally from one end to the other without operator interference. The open top design is suitable for addition of material while in operation and also for visual inspection. The complete trough can be tilted for unloading of the material. RaviKiran are Manufacturers of Paddle Mixer, ideally suitable for mixing of wet mass, dry powder, dry powder with wet mass, etc, for the preparation of pharmaceutical mass for preparing tablets and similar other applications. The mass mixer gives through mixing due to its unique blade design and the angle of the blade. Granulation Line:- Mass Mixer and Ribbon Mixere ideally suitable for mixing of wet mass, dry powders with wet mass, etc. for the preparation of pharmaceutical mass for the preparations of tablets. Description: The mixer is provided with a U shaped trough with a centrally mounted shaft passing laterally through the trough. The shaft is provided with a set of blades welded at different angles each blades has a dedicated mixing function. The angle of the blades is such that through, efficient and complete mixing of the material takes place. The material due to the unique blade design is subjected to lateral as well as vertical motion and the complete material is rolled inside out and for bottom to top, due to which complete mixing takes place and a homogenous mass is obtained. The control shaft is provided with gland packing at both ends for complete sealing. The central shaft is coupled to a suitable gear box and a suitably powered motor. The complete assembly is mounted an bearing blacks bolted to the frame of the machine. The machine is provided with a manual tilting mechanism of the side with gear mechanism for unloading the material into the collecting tray (motorized tilting for higher capacity models available as an option). The trough can be tilted in the front up to 90 Degrees by rotating the handle provided at the side. The mixer is provided with a sliding and open able top cover with safety guard so that the operator does not accidentally put the hand inside the trough when the machine is in operation. The top cover is provided with a limit switch to stop the machine as soon as the top cover is opened. Salient Features: The trough design in such as to evenly distribute the material throughout. The unique blade designs and placements facilitate in the mass moving completely from top to bottom and laterally from one end to the other without operator interference. The open top design is such that addition of material while in operation and visual inspection is possible. Limit switch provided for the top cover to stop the machine when the cover is lifted.

Ribbon Blender is suited for solids blending where the material is less than free flowing. They are available in the customary U-Shaped trough with a variety of agitator arrangements. We offer sanitary design as well as heavy-duty versions utilizing heavier walls and oversized shafts and bearings for especially dense materials.

Features 1. Blades are designed to suit specified product characteristics. 2. Triple mixing action for fast and efficient blending. 3. Gland packing is provided with Teflon bush and PTFE Braded gland. The Gland can be replaced without dismantling drive assembly.

The Ribbon Blender does homogenous mixing of powder and granules of different densities. The Blender consists of a Semi-cylindrical shell inside which rotates a shaft welded with spiral inner and outer ribbons. The outer ribbon blades pushes the material at the centre of the container and simultaneously the inner ribbon blades pushes the material at the either ends of the container. Ribbon Blenders comprises of curved horizontal ribbon  blades that provides easy operation which are mostly used by Chemicals, Plastic, Pharmaceutical, Paints and Food industries. The ribbon blades of different designs are used to suit the need of different materials.  Ribbon Blenders are fabricated in capacities ranging from 50 liters to 5000 liters  with material of construction SS 316/SS316L Mixing is achieved in 15 to 20 minutes.

The Ribbon Blender does homogenous mixing of powder and granules of different densities. The Blender consists of a Semi-cylindrical shell inside which rotates a shaft welded with spiral inner and outer ribbons.   The outer ribbon blades pushes the material at the centre of the container and simultaneously the inner ribbon blades pushes the material at the either ends of the container.   Ribbon Blenders comprises of curved horizontal ribbon blades that provides easy operation which are mostly used by Chemicals, Plastic, Pharmaceutical, Paints and Food industries. The ribbon blades of different designs are used to suit the need of different materials.   Ribbon Blenders are fabricated in capacities. ranging from 50 liters to 5000 liters with material of construction SS 316 / SS 316L. Mixing is achieved in 15 to 20 minutes.  

STANDARD FEATURES • Available in working capacity of 5 liters - 10,000 liters • Available in all grades of stainless steel, carbon steel and special alloy steels. • Ribbon agitator for center discharge. • Designed for atmospheric operation. • Top cover with nozzles for material charging. • Centrally located Flush bottom discharge valve.• Jacket available for heating & cooling purpose. • Stuffing boxes with easily disassembled housings. PTFE gland packing provided.• Stainless steel surfaces are polished to desired standards. All exterior non-stainless surfaces are painted with enamel paint. • Squirrel Cage, Three Phase Induction Motors suitable for 415 Volts, 50 Hz.• Worm reduction gearbox, helical reduction gearbox.• Single Speed Drive. • Blender is mounted on supports providing adequate discharge clearance.

• Ideal for Uniform and Homogeneous Mixing of Dry or Semi - Wet Powder & Granules Where High Shearing Force is not Required. • Basically an Open Tub with Welded or Botled end Caps on Each End. • Shaft Seals Incorporated Into End Caps. • Bearings Supported by Framework. • PTFE Gland Mechanism Provided at Shaft Ends to Prevent Outside Lubricants From Entering into the Mixing Chamber and to Prevent Inner Leakage. • The Drive System is Through a Suitable Worm Ear and Motor • Bottom Discharge Slide Regulaed Hrough Butterfly Valve of Suitable Diameter.

• WORKING CAPACITY KGS.: 25, 75, 200, 500
• SIZE IN FEET'S L X B X H: 1.6' X 1.0' X 1.5', 2.5' X 1.5' X 2.0', 4.0' X 1.5' X 2.0'
• HP: 1, 1.5, 3

For Continuous Speedy & uniform mixing of dry and semi dry powders  Spiral type Ribbon blades for three way mixing.  Jacket - Cooling  / Heating arrangement available.

• Application: Pharma Industry.Food Industry.Construction Industry.Chemical Industry.Cosmetic Industry.
• Feature: All cGMP models.High In performance.Effective Blending.WIP inbuilt for cleaning.Spherical,

Ideal for Uniform & Homogeneous mixing of dry / semi wet blending & mixing of various materials having different densities provided with various designs of the blades to suit the process requirement. The automatically / manually operated. Used in Pharmaceuticals, Chemical, cosmetics, Foods industry.Capacity ranges – From 10 Liters to 25000 Liters.M.O:- Can be manufactured in all weld able materials, CS, SS, & Special Steel.

We offer ribbon blender that is use in varied applications for the purpose of mixing dry granules as well as powders in a homogeneous manner. The ribbon blender that we manufacture is on a huge demand in the market as there is no alternative available to its sturdy construction and effective usage.

• Power: 3KW
• Model No:: LRB-1
• Capacity:: 100 L
• Mixing Volume:: 60L-60L
• Speed:: 76RPM

We are offering best Ribbon Blenders supplying company.

industrial ribbon blenders, Heavy duty gearbox, ploughshare mixers

Vibration Meter, Industrial Feed Hopper, Rotary Table Feeders