Ridhi Siddhi Steel Corp Khetwadi, Mumbai, Maharashtra

The wear parts used in these mixers are of low wear category. RIDHI SIDHI has developed these economical wear parts which are affordable and at the same time gives long life.The liners and mixing paddles are low alloyed but heat treated to give maximum wear resistance. The mixing arms also are casted to give the best performance.

The components are manufactured as per the OEM grades and the physical and chemical properties are OEM specifications thus keeping them strong as the originals. These components are subjected to multiple Heat treatment stags to get the best tensile strength, hardness and microstructural properties. Additional internal bracing is added if required to prevent it from deformation. The bore of the track shoe is maintained inline for accurate pin fit. Material: High strength Alloy steel subjected to multiple stages of Heat treatment to achieve the desired properties.”

EXCAVATORS AND LOADERS - TOOTH POINTS AND ADAPTORS RIDHI SIDHI manufactures Replacement Wear Parts like Tooth Points & Adapters for Excavators and Loaders of various makes of construction equipment’s.   These components are manufactures as per the OEM standards giving optimum performance and service life. OEM standard means the chemical composition, Heat treatment process is all followed as pee the OEM manufacturer. The consistency is also maintained by adhering to the process.   Our products include : Tooth points & Adapters.   We make replacement parts for excavators and Loaders manufactured by : HYUNDAI, KOMATSU, LIEBHERR, TATA, KOBELCO, DOOSAN and many others

wear parts for asphalt mixers having excellent wear resistance. These wear parts are manufactured of Hi-Chrome Iron and undergo two stages of Heat treatment for exceptional hardness of 650+BHN giving excellent wear life. The mixing arms are manufactured form alloy steel and also Heat treated to achieve better wear resistance.

Our superior methods and equipped foundry enable us to produce Ni-Hard, Hi-Chrome Iron castings with Brinell hardness of 650+ for shovels and wear plates. Other parts like mixing arms are manufactured from alloy steel castings. The exceptional hardness of these castings achieved by long Heat treatment cycles extends its wear life.

We recently expanded our production facilities by increasing the melting capacity and by adding a full fledge Heat treatment shop (in-house) where our products undergo special Heat treatment cycles for various grades. Having an in-house Heat treatment shop gives an advantage of close monitoring of the Heat Treatment cycles ensuring that the castings are subjected to the total desired cycles giving the best results. In - House Pattern Development - The starting point of everything we make, All patterns (Metallic & Wooden) are made on VMC Machines, 250 kw Medium Frequency Induction furnaces.

Our superior methods and equipped foundry enable us to produce Ni-Hard, Hi-Chrome Iron castings with Brinell hardness of 650+ for shovels, mixing blades and wear plates. The exceptional hardness of these castings extends the wear life of these parts.Liners. Wear Plates, Mixing arms, Mixing Blades. Mixing paddles, scrapers, tiles, side & floor lining and all types of concrete and cement mixer liners.

Tooth Points & Adapters for Excavators and Loaders of various makes of construction equipment’s.These components are manufactures as per the OEM standards giving optimum performance and service life. OEM standard means the chemical composition, Heat treatment process is all followed as pee the OEM manufacturer. The consistency is also maintained by adhering to the process.

Aggregate Processing :RIDHI SIDHI makes the highest quality Ni-Hard, Hi-Chrome & Mn Steel replacement parts for Stone crushers.Our Aggregate Industry products include: Anvils Impellers, Liners etc. We can manufacture replacement parts for VSI crushers and as per your requirement too.

RIDHI SIDHI is your source for Twin –shaft concrete mixer replacement wear parts.Our superior methods and equipped foundry enable us to produce Ni-Hard, Hi-Chrome Iron castings with Brinell hardness of 650+ for shovels and wear plates. Other parts like mixing arms are manufactured from alloy steel castings. The exceptional hardness of these castings achieved by long Heat treatment cycles extends its wear life.Our products for twin shaft mixer include:Liners. Wear Plates, Mixing arms, Mixing Blades. Mixing paddles, scrapers, tiles, side & floor lining and all types of concrete and cement mixer liners.We make replacement parts for mixers made & used by :STETTER, B.H.S, LIEBHERR, SIMEM, ORU, O-COUGHI, SICOMA, EUROTECH, ELBA, MEACONS, POLYTECH, MAXOMIX, AQUARIUS, WIGGERT and many others.  

RIDHI SIDHI is your source for Pan type concrete mixer replacement wear parts.Our superior methods and equipped foundry enable us to produce Ni-Hard, Hi-Chrome Iron castings with Brinell hardness of 650+ along with parts in alloyed Mn-Steel and other alloys castings. The exceptional hardness of these castings extends the wear life of these parts.Our products for Planetary type mixer include :Liners. Wear Plates, Mixing arms, Mixing Blades. Mixing paddles, scrapers, tiles, side & floor lining and all types of concrete and cement mixer liners.We make replacement parts for mixers made & used by :STETTER, LIEBHERR, SIMEM, ORU, SICOMA, MEACONS, POLYTECH, MAXOMIX, AQUARIUS, WIGGERT and many others.

RIDHI SIDHI is your source for Pan type concrete mixer replacement wear parts.Our superior methods and equipped foundry enable us to produce Ni-Hard, Hi-Chrome Iron castings with Brinell hardness of 650+ for shovels, mixing blades and wear plates. The exceptional hardness of these castings extends the wear life of these parts.Our products for Pan type mixer include:Liners. Wear Plates, Mixing arms, Mixing Blades. Mixing paddles, scrapers, tiles, side & floor lining and all types of concrete and cement mixer liners.We make replacement parts for mixers made & used by :STETTER, LIEBHERR, SIMEM, ORU, SICOMA, MEACONS, POLYTECH, MAXOMIX, AQUARIUS, WIGGERT and many others.

Our Aggregate Industry products include: Anvils Impellers, Liners etc, We can manufacture replacement parts for VSI crushers and as per your requirement too.

RIDHI SIDHI manufactures Augers For Pavers used by paving industries.Our augers are manufactured in High Chromium Cast Iron and are subjected to multiple heat treatment process to achieve a hardness of about 650 BHN giving exceptional wear resistance.We make AUGERS FOR VARIOUS EQUIPMENTS AND DEVELOPING MANY MORE.  

RIDHI SIDHI manufactures replacement wear parts for asphalt mixers having excellent wear resistance. These wear parts are manufactured of Hi-Chrome Iron and undergo two stages of Heat treatment for exceptional hardness of 650+BHN giving excellent wear life.The mixing arms are manufactured form alloy steel and also Heat treated to achieve better wear resistance.Our products include:Mixing Paddles and Arms, Paddle Tips, Gate Wear Plates, Liners and other parts.We make replacement parts for equipments by :SPECO, LINTEC, LINHOFF, GUJARAT APOLLO, MARINI, PARKER