Rolling Machine Dealers in Nariman Point, Mumbai

Features: - All fabricated design - Supplied with quick lifting centre pin arrangement with hand operated lever - Capacity maximum of leaf eye rolling 100 x 12 mm Installation: - The machine should be installed on a concrete foundation close to the heating furnace. Hot end chambers / pre-bending of leaf spring should be done. - After Hot end chamfering of lead on press, hot flat end should be reheated. Two Eye Rolling diameter pins should kept ready. One pin is used for eye rolling while the other pin cools in the water tank kept below the eye rolling machine. Corresponding to the pin size, the required bush is to be mounted on the Eye Rolling Machine. Please make all size pins and corresponding bushes as per your requirement.  Brief Operation: Put eye rolling pin in its position. Place the pre-bent portion of the hot leaf into the machine, tighten the clamping screw and manually push the pivot end of the machine using a long pipe. After completing 3/4th bend / eye, release the clamping screw and pull the pivot end of the machine to the starting point. Again clamp the screw and push the pivot end again to complete the eye. Release the screw and pull the pin upwards. Remove the eye using a hammer and die correct the eye size and Inside Diameter. Put this eye rolling pin in the water tank for cooling and use the other pin for the next rolling operation.

• Color: BLUE
• Material: MS BODY
• Size: 62", 72", 82", & ALL SIZE AVAILABLE

fabric roll couting machine  with reverse forward option.

• Country of Origin: India
• Power: Manual Or 1.0HP
• Type: Swaging Machine
• Swaging machine: Swaging machine with swage rollers

Swaging machine motorised model with standard Swage rolls with suitable stand and motor. This is a heavy duty Casted body Swaging machine ideal for AC ducting and other such work. The machine is having six inch depth of throat and is supplied with a set of six pieces of different shapes swage rolls suitable for this machine. It is supplied with suitable heavy cast iron stand and with motor suitable to run either on 440 volts three phase or 220 volts single phase AC electic supply. Kindly ask for more details.

• Country of Origin: India
• Type: Fabric Rolling Machine
• Brand Name: MARUTI MACHINE
• Material: Mild Steel
• Operating Type: Semi Automatic
• Shape: Rectangular
• Corrosion Resistance: No
• Certification: ISO 9001:2008 Certified
• Machine Structure: Horizontal
• Color: Blue
• Reverse Rotation: No
• Voltage: 110V
• Is It Variable Speed: No
• Condition: New
• Driven Type: Electric
• Phase: Single Phase
• Machine Weight: 100-1000kg
• Packaging Type: corrugated box
• Capacity: 10-50kg/h
• Finishing: Polished
• Power: 1-3kw
• Usage: textile fabric rolling machine
• Specialities: Cost Effective
• Size (mm): 100mm
• Dimension (LxWxH): 650x460x385mm

• Roll Dies (Max. Outside Dia): 80, 140, 160
• Roll Dies (Max. Inside Dia): 28, 40, 54
• Roll Dies (Max. Width): 38, 50, 80

The 3 rollers HH-3R rolling machine operates hydraulically. The simultaneously and concentricity of three forces at 120° assures stability of the work piece during the rolling and as consequences the maximum geometrical precision of the work piece. The elimination of the support blade consents a better finishing of the piece and execution of particularly delicate profiles. The machine is suitable for rolling pipes, lapping work, threading with high class precision and for mass production of Scaffolding pipe jack and solid jacks screws etc.

Size and Specification as requested by you. (S. P. M. - Tailor made as per your specification)

• Capacity: 2.5mtr x 20mm
• Material: Metal
• Phase: 3ph
• Power: 20 HP
• Machine Type: Cold Rolling
• Rolled Shape: Tube
• Production Capacity: 15-20 ton/day
• Max Rolling Speed: 2.5 mtrs per min.
• Surface Finishing: HAMMER TONE
• Raw Material: STEEL
• Bottom Roll: 210 MM
• Motor Power: 20 HP
• Roller Size: 2550 MM
• Total Power: 20 HP
• Automation Grade: Semi-Automatic
• I Deal In: New Only
• Brand: PMT
• Features: Used for rolling the plates, High performance, Easy to install and operate

• Brand Name: Himalaya
• Material: MS SS
• Capacity: 2500 mm * 25 mm
• Rolled Shape: Tube
• Automation Grade: Semi-Automatic
• I deal in: New only

MAIN TECHNICAL PARAMETERS 1. Tube diameter after compressing : Φ5.2mm - Φ19.0mm 2. The max. diameter before compressing : Φ21mm 3. The min. length of tube : 110mm 4. Efficiency : 18mmin 5. After compressing, the straightness can reach : -1:300 and the roundness can reach : 0 0.07

• Brand Name: WMW
• Condition: Used
• Place of Origin: Germany
• Model Number: UPW25

• Plate Thickness: 5mm to 50mm
• Plate Width: 1000mm to 3000mm

ALIENT FEATURES : Three Roll Symmetrical Principle for Pre-pinching of Plate ends & Rolling Without Removing the Plate. Modern Design, Robust Steel Construction. High Quality Alloy Steel Rolls. Built in Cone Rolling Feature. Precise Controlls Through Push Button Operation with Interlock Circuit. Electrical / Mechanical Overload Protection. Centralised Lubrication System. Rool Position Setting by Dial / Scale Readout.

This is our heavy duty three roll pyramid type power operated plate bending machine in model TPH having capacity to bend 2500 x 25 mm in mild steel. The machine weighs about 6700 kgs and is equipped with 30 HP motor, siemens make on/off starter and reverse/forward switch complete with lubricaton system. Some of the salient features of our three roll pyramid type plate bending machines are as under: Heavy duty steel fabricated housing amply proportioned to withstand maximum strain. Rollers are of forged EN-8 material and run in collar type gun metal bushes. Base is of heavy duty girders. Centralized lubrication system Drive through a series of hob cut properly hardened steel gears and worm reduction gear box. Screw jack is provided to keep the top roll in horizontal position when trunion is retracted to facilitate removal of formed shells. The machine is supplied complete with : - Elicon / Redicon make Reduction gear box - Electric motor 3 phase /440 volts / 50 cycles AC - Reversible switch (Upto 5 HP) - Reversible starter (Above 5 HP)   These Three Roll Pyramid Type Plate Bending Roller Machines are available in a wide range of capacities from 1250 x 3 mm in mild steel up to 3000 x 42 mm. Kindly ask for details.

• Brand Name: KBC

We are offering 13" Roll to Roll Lamination Machine. kbc brand.

Conventional CNC Machines High Rigidity & Ultra-Precision Sturdy Construction Sensitive Axes Movements for Precision Cambering Facility

• Parameters: 1. Tube diameter after compressing : Φ5.2mm - Φ19.0mm, 2. The max. diameter before compressing : Φ21mm, 3. The min. length of tube : 110mm.

TL - 101 Tube rolling machine is used for compacting elements in order to increase the density of MgO. It has been well-received in France, Japan and other countries.   Functions : 1.The frame of this machine is made out of pig iron casting. The rocker die and tank are integral linear cutting. This machine is also equipped with    fine-tuning dial, automatically removing sundries device and automatically cooling system. 2. According to the tube size and your special requirements, we have two types of motor of pinch roller for your choice. They are non-uniform speed    (different speed) and uniform speed. The former make the tube better ductility, while the latter applies 10 the lube with large diameter. 3. When the tube specifications changed, we only need to replace a set of pinch rollers. The pinch rollers can be classified into two categories: high     speed steel and tungsten carbide alloy.   4. Automatically stop when clogging.   5. This machine is of small size, low noise, convenient adjustments. 6. Applicable tube: Copper, iron, aluminum, stainless steel, etc.   Main Technical Parameters 1. Tube diameter after compressing : Φ5.2mm - Φ19.0mm 2. The max. diameter before compressing : Φ21mm 3. The min. length of tube : 110mm 4. Efficiency : 18m/min 5. After compressing, the straightness can reach : -1:300 and the     roundness  can reach : 0 0.07

• Material: Mild Steel
• Automation: Semi-Automatic
• Job Thickness: 1-2 mm
• Max Sheet Width: 0-200 mm
• Finish: Color Coated

3801 Roll Lamination Machine, Manual Foil Cutter, C-002 Plastic Corner Cutter

cloth rolling machine, Sample Cloth Cutting Machine, Tailor Scissors

galvanizing equipment, curving machine, BARREL corrugation machine

thread rolling machines, Polishing Machines

Cutting Machine, textile sample cutting machine

Roll Threading Machine, control switches, pirn winding machine, loom starter

liner re-rolling machines, FABRICATION, band building machines

forging ring rolling machine, Semi Hot Chamber Die Casting Machine