Ronak metal Khetwadi, Mumbai, Maharashtra

We offer a wide range of welded pipes and stainless steel welded pipe, which has higher contents of molybdenum and nitrogen that improve and make it corrosion resistance and durable. The pipes developed using nitrogen alloyed chloride resistant grades are welded with the addition of nitrogen in the shielding gas resulting in welded pipes. Further, some of these pipes are also welded with filler metal, which is heat treated as per the requirements. Our range of pipe is highly corrosion resistance than other conventional steel pipes and finds extensive applications in various industries.

Weld neck flanges are a flanges with a heavy welding neck which is hot formed from a circular section of steel plate having a small co-axial hole in the center. Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : Recommended for orifice flanges. These work as substitute for slip-on-flanges in the cases where the diameter of the tube is very small and working pressure is very high.

We offer Unequal Tees and Unequal Cross-that are corrosion resistant and can be ideally used in very high and low temperature conditions. Our products are known for high-strength, less maintenance, excellent finish and longer life. Our comprehensive range of unequal tee and cross are offered in different specifications in order to fulfill varied industrial requirements.

We have a wide range of TMT Re Bars (SAIL And RINL Plants) which are available in various types. These products are used in various industries all over the world

We are one of the leading trader and supplier of ASTM A193 Gr. B16 Threaded Rods.

We have firmly positioned ourselves as one of the dominant threaded flange suppliers, based in india. Our threaded pipe flange is widely used to low pressure-piping systems. PVC threaded flange offered by us can be assembled easily without welding. Thread / pipebrore flanges offered by us are available at very affordable prices.

Size: 1/2"-18" Range:150 LBS , 300 LBS,400 LBS , 600 LBS , 900 LBS , 1500 LBS, 2500 LBS / TABLE 2.5 , TABLE 6, TABLE 10, TABLE 16,TABLE 25 , TABLE 40, TABLE 64, TABLE 160, TABLE 320, TABLE 400 Form:Slip on, socket weld, blind, lapped, screwed, weld neck, reducing ,spectacle, slip on boss, plate, plate blank, screwed boss, BLRTJ, SWRTJ, WNRTJ, SPECTACLE BLRTJ, Grade : A790 S31803, 32205, 32750, 32760

We have in store for our clients, a quality assured range of stubend long & short fittings that are in compliance with the industry accepted standards and norms. These fittings are hot dip galvanized, epoxy coated and electro polished for durability purpose. We also provide these fittings along with mill test certificate as per EN 10204 / 3.1B to suit the quality conscious approach of our clients.

Backed by a state-of-the-art infrastructure, we are able to offer a wide range of Long & Short stub ends. These find applications in sugar mills & distilleries, pumps & petrochemicals, cement and construction industries. Long & Short Bends are also known as Lap Joints and Vanstone Flared Laps and are used in place of welded flanges where there is a need of rotating back up flanges. These are made from metals, which are compatible with the piping system. The sub ends are also available with a standard weld bevel and in two standard lengths, namely MSS and ANSI

We offer Unequal Tees and Unequal Cross-that are corrosion resistant and can be ideally used in very high and low temperature conditions. Our products are known for high-strength, less maintenance, excellent finish and longer life. Our comprehensive range of unequal tee and cross are offered in different specifications in order to fulfill varied industrial requirements.

We offer our clients with a comprehensive range of Stainless Steel Shims hat are designed with qualitative stainless steel and other raw material sourced from certified vendors. These are widely known for their durability and quality.

Build to perfection; we present the clients with our sturdy range of Stainless Steel Rods that are manufactured in diverse diameters and length parameters. These rods find their utility in various industrial and commercial applications, like on construction and reinforcement sites, fasteners, nuts bushes, pump shafts etc. We are also capable of supplying them in various grades of stainless steel rods with desired length and finishes.

We also offer stainless steel pipes, which are used in various industries for several piping purposes. These stainless steel pipes and tubes are used in similar service conditions in heat transfer process equipment like boilers, super heaters, heat exchangers, condensers etc. Depending upon the industrial usage these can be customized as per the specific requirements of our clients. Technical specification : Pipe & tubes specification: astm a 213, a 312, a 358 dimension: ANSI/ASME b 36. 10 / b 36. 19 * grade: tp 202, 304, 304 l, 304 h, 310, 316, 316 l, 316 h, 317, 317 l,321, 347. Type: seamless, ERW, EFW * size: : seamless 1/4" to 16". ERW/EFW 1/4" to 48 ". Make : sumitomo, sammi, ratnamani, remi, suraj, prakash, china etc.

Our workforce has the inherent desire to offer something unique and truly outstanding with innovation and creativity with which we bring our customers with Stainless Steel Foils. These foils are acknowledged for their dimensional accuracy and durability. These are 100% corrosion proof and are available to our clients at the leading competitive prices. The steel foil has the unique ability to maintain improved manageability, with optimized results when it comes to delivering results on industrial level.

We offer a wide range of stainless steel butt weld pipe fittings, which are used in varied industrial applications. Manufactured from stainless steel, we also provide our product as per the customers specifications. Our range of butt weld pipe fittings are known for its high quality, zero-defects and superior performance.

We provide our clients an extensive range of square pipes which cater to the needs of various industries. Our square steel pipes are much more efficient in comparison with the round steel pipes due to its square column. We make use of premium quality carbon steel for the fabrication of our range. These tubes find application in various areas such as shelves, racks, trailers, structural projects and various ornamental purposes. Our range is used to provide support to the roof and also serve as roof top ventilation baffles. Square pipe : Special design available according to requirement Anti-corrosion and high-temperature resistant.

We are acknowledged as one of the distinguished safety chucks manufacturers. Safety chucks are steel square bar holding device. It can hold square bar size 1", 1-1/4", 1-1/2", 2" or 3". Mechanical safety chucks are also manufactured in mm sizes 25mm, 32mm, 38mm, 40mm, 45mm, and 50mm, as per specific requirement of weight to be handled. Replaceable inserts are the main advance of sliding type safety chucks and it is having more square bar holding area than tilting type safety chucks. For fixing tension control brake safety chucks comes with extended shaft on one side. Square bar size are decided consider the load and application.

We offer spectacle flanges that are fabricated with optimum quality stainless steel & alloys. These are available in various technical specifications and in forms such as slip on, socket weld, blind, lapped, screwed, weld neck, reducing, spectacle, slip on boss, plate, plate blank, screwed boss etc. Apart from the standard array we can also customize spectacle flanges as per the specifications provided by our clients.

We have a wide range of pipes that are made up of monel, nickel, inconel, hastalloy, copper, brass, bronze, titanium, tantalum, bismuth, aluminum, high speed steel, zinc, lead, etc. These pipes are available in round, square and rectangular shapes. Size: Upto 24" NB. (Seamless & Welded) Wall Thickness: Sch. 5S to Sch. XXS.

We provide a wide range of long bends & short elbows that are used in pipeline, bend, clamp, bends and elbows. We also offer special pieces for distribution arms. Our range of long bends & short elbows is casted with manganese & chrome elbows and is available in elbow radius of 1000 mm. In addition, it also has variable widths at curves for increasing the strength at a critical point.

Socket weld flange is a device that is welded to the end of pipe so that the pipe can be bolted to another pipe with a similar flange. Socket weld flanges enable a pipe to be disconnected and reconnected with ease. Available in a spectrum of shape and sizes, our forged light weight weld flanges are manufactured using superior grade material such as stainless steel socket weld flange, carbon steel socket weld flangeand known for their durability and performance. Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : Recommended for orifice flanges. These work as substitute for slip-on-flanges in the cases where the diameter of the tube is very small and working pressure is very high.

Designed with precision, our range of slipon flanges are suitable for low as well as high pressure applications. These slipon flanges flanges help in reducing turbulence and erosion inside the pipeline. We offer these flange in different sizes and thickness to meet the varied application requirement of the clients.   Specifications : ANSI B 16.5 from 1/2" to 24" and classes150 to 2500 (complete range) Applications : Used in quick assembly to save the cost, these are also used in less strict requirements in terms of length of pipe section.

Seamless steel come in finishes such as hot rolled, cold drawn, turned, roto-rolled etc. After the end finishing, all pipe is then pressure tested on a machine. Following a final visual inspection, pipe is weighed, measured and stenciled. External coating can then be applied if required. It is involved in the applications for aircraft, missiles, anti-friction bearing, ordnance, etc. Ultra high strength and corrosion-resistant properties makes these perfect for oil & gas industry,     chemical industry and car industry. Seamless steel pipes and tube comes in all kinds of sizes including thin, small, precise, slender and other special pipes and are used for steam boilers and pipelines, installations with high and supercritical steam conditions. These seamless steel pipes and tubing are manufactured by commercial, electric furnace bearing, consumable, electrode vacuum melted quality steel. These impart strength and durability to the pipes and thus can be used for corrosion-resisting applications.

The wide range of Reducers offered by us is available in two different forms, one is concentric and another is eccentric types. These are developed using quality steel and other alloys and find usage in sugar mills & distilleries, pumps & petrochemicals cement & construction industries and steel plants. Our range is available in various sizes, schedules and flange configurations as per the requirements of the clients. The Reducers offered by us have inlet and outlet ends and they align to a common center line