Rotary Evaporators Dealers in Mumbai

Manufacturer and exporter of Industrial Evaporators, falling film evaporator, Forced Circulation Evaporator, Scrapped Surface Evaporator, Agitated Thin Film Evaporator (ATFE), Thin Film Evaporator, Rising Film Evaporators, Combination Evaporator from India.

We are a prominent Manufacturer, Exporter and Supplier of Rotary Film Evaporator in Mumbai, India. Our evaporator is automatic and corrosion resistant. We make available evaporator in different sizes and technical specifications to meet the diverse demands of buyers. We provide Rotary Film Evaporator that is widely used in various industries such as pharmaceutical, R&D. bulk drugs and many more. Our Evaporator is ideal for heat sensitive materials. Capacity : 2 ltr – 100 ltr Raw Material Used : An electrically heated SS heating bath with facility for raising and lowering the height.Rotating flask of corrosion resistant borosilicate glass which is connected to drive by a coupling.

• Power supply:: 380V, 3 F + N , 50/60 Hz
• Vacuum tight:: 5 mbar

Rotary Evaporator Strike It meets all the process needs by using Borosilicate glass and PTFE permitting aggressive substances treatment. The plant allows for evaporation of volatile components (lowboiling)so as to separate them from the residual ones (high-boiling) thanks to the difference of their boiling points. Easy and totally safe startup, check and stop procedures of the process: Strike 2000 is provided with a transparent protection shield for the evaporation flask and the thermostatic bath.

• Brand Name: Aczet

The ARE Series Rotary Evaporator meets highest applicative demands in R&D and quality control. The controller as well as a wide range of other optional products, vacuum pumps, recirculating chillers, glassware and accessories enable the highest degree of efficiency and fully automated operations.   Features 6 different types of flasks are attachable (from 50ml to 3000ml). Digital speed control. Digital R.P.M. Display. Vertical / Slanting type condenser Digital interior temperature measure and display. It catches the temperature changes caused by the interior pressure drops. Distinguished Features  If the amount of water goes down under the certain threshold in the heating bath, the system automatically turns off its power for the safety purpose (PTFE coating) Double jacketed bath body (Safe to touch)

A rotary evaporator (or rotavap[1]rotovap) is a device used in chemical laboratories for the efficient and gentle removal of solvents from samples by evaporation. When referenced in the chemistry research literature, description of the use of this technique and equipment may include the phrase "rotary evaporator", though use is often rather signaled by other language.Rotary evaporators are also used in molecular cooking for the preparation of distillates and extracts.

• Material: Plastic
• Phase: 1 phase
• Warranty: 1 year
• Usage/Application: Rotary
• Shape: Round
• Size: Customized
• Finishing Type: sharp

• Voltage: 400 - 440 V
• Weight: 195, 200, 205 kg
• Frequency: 50 - 60 Hz
• Max. power consumption: 7500 - 9100 W
• Motor: 400 V
• Speed: 5 - 100 rpm
• Accuracy: +/-2 deg C
• Consumption: 200-400 L/H
• Heating capacity: 6600 W 3 W/cm2
• Dimension: 1410 x 2300 x 830 mm

Rotary Film Evaporator is used in various applications such as distillation of solvents, concentration of solutions, crystallization, synthesis and purification, powder and granules drying, etc. Rotary Film Evaporator is a distillation unit incorporating a rotating evaporation flask. Our Rotary Film Evaporator can be evacuated down to one mbar if the vacuum seals are maintained in good condition. It is offered at market leading prices.Features : Digital display for rotation speed Vapor temperature and bath temperature Convenient controls for adjustment of rotation speed and heating bath temperature Rotation speed from 1 rpm to 80 rpm Miniature circuit breaker and separate power switches for the control panel One-heating bath for water and oil Bath temperature display accuracy: +/- 1 AC Digital display for vapor temperature: +/- 1 AC S bath as standard

Applications: The Ideal partner for all routine rotary vacuum evaporation’s at Universities, Colleges, Schools, small to mid size Companies, and as a standby unit. Advantages: Spark-less drive unit AC motor with assured speed regulation. Flask sizes from 100 to 1000 ml. Digital Temperature Controller for Water Bath . PTFE / glass sealing mechanism. Smooth, adjustable, maintenance free and user friendly single lever manual lift. Vertical Glass Set with 1000 ml B29 Evaporating Flask & 1000 ml S35 Receiving Flask, B29 plastic C Clip & S35 Ball Joint Clip. Flask ejector for easy removal of evaporating flask.

• Evaporating Flask: 250ml - 3000ml
• Receiving Flask: 1000ml
• Condenser: Vertical Double Coil Type Area 0.2 Sq. M.
• Heating Bath: 4 KW, PTFE Coated Bath, with sealing cover
• Rotary Speed: 20
• Rate of Evaporation (H2O): >1.5l/h
• Temperature control: Automatically, digital display, RT-90 ºC
• Low noise: Improved Version
• Power supply: 220V/50Hz
• Vapour temperature display: Optionally provided

• Usage/Application: Laboratory
• Display Type: Digital
• Speed Control: 20 - 280 RPM
• Bath Power Wattage: 1000W 4.5 A

Rotary Vacuum Evaporator, Rotavap Series Diagonal Condenser, Model PBU-6 This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath thermostatically controlled temp., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape.     ModelDescription R/150/01 Condenser double coiled with S-35 cup. R/150/03 Gasket Seal for Vapour path Tube (VITON) R/150/05 Vapour Path Tube B-24, B-29 R/150/06 Feed Tube for condenser R/150/07 Evaporating flask R.B. 1 liter B-24 socket R/150/08 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/150/09 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/150/22 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/150/24 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/150/26 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/150/11 Tension Spring to hold condenser. R/150/13 Wire Clip to holder vapour tube and boiling flask R/150/15 Ball joint clip S-35 R/150/32 Water bath double walled inner SS with Thermostatic temperature control. R/160 Rotary Vacuum Evaporator, Rotavap Series Diagonal Condenser, Model PBU-6D. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath having Digital temperature indicator cum controller., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/160/01 Condenser double coiled with S-35 cup. R/160/03 Gasket Seal for Vapour Tube (VITON) R/160/05 Vapour Path Tube B-24, B-29 R/160/6 Feed Tube for condenser R/160/07 Evaporating flask R.B. 1 liter B-24 socket R/160/08 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/160/09 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/160/22 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/160/24 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/160/26 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/160/11 Tension Spring to hold condenser. R/160/13 Wire Clip to holder vapour tube and boiling flask R/160/15 Ball joint clip S-35 R/170 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBV-7. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath thermostatically controlled temp., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/170/02 Vertical condenser double coil with two outlets for water circulation. With S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/170/03 Cone Adapter for condenser to Vacuum pump R/170/06 Vapour Path Tube B-24, B-29 R/170/07 Gasket Seal for Vapour Tube (VITON) R/170/11 Feed Tube for condenser trap R/170/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/170/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/170/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/170/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/170/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/170/23 Tension Spring to hold condenser. R/170/25 Wire Clip to holder vapour tube and boiling flask R/170/27 Ball joint clip S-35 R/17032 Water bath double walled inner SS with Thermostatic temperature control. R/171 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBV-7D. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath having Digital temperature indicator cum controller., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/171/02 Vertical condenser double coil with two outlets for water circulation. With S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/171/03 Cone Adapter for condenser to Vacuum pump R/171/06 Vapour Path Tube B-24, B-29 R/171/07 Gasket Seal for Vapour Tube (VITON) R/171/11 Feed Tube for condenser trap R/171/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/171/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/171/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/171/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/171/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/171/23 Tension Spring to hold condenser. R/171/25 Wire Clip to holder vapour tube and boiling flask R/171/27 Ball joint clip S-35 R/175 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBCT-8. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath thermostatically controlled temp., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/175/02 Cold trap condenser double walled with S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/175/06 Vapour Path Tube B-24, B-29 R/175/07 Gasket Seal for Vapour Tube (VITON) R/175/11 Feed Tube for condenser trap R/175/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/175/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/175/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/175/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/175/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/175/23 Tension Spring to hold condenser. R/175/25 Wire Clip to holder vapour tube and boiling flask R/175/27 Ball joint clip S-35 R/175/32 Water bath double walled inner SS with Thermostatic temperature control. R/178 Rotary Vacuum evaporator, Rotavap Series Vertical Condenser, Model PBV-7D. This model of evaporator is supplied complete with geared drive unit offering smooth speed control by analog knob, Jack arrangement fitted on base unit for positioning glass assembly, Double walled water bath having Digital temperature indicator cum controller., glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800 ml., receiver flask capacity one liter fitted with a ball joint, feeding tube and vapour path tube a complete working unit. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800ml. per shape. R/178/02 Cold trap condenser double walled with S-35 Ball at bottom for connecting to receiving flask. Quick fit type joint at top of condenser. Cock for feed tube on one side while the other side will be connected to motor with ring. R/178/06 Vapour Path Tube B-24, B-29 R/178/07 Gasket Seal for Vapour Tube (VITON) R/178/11 Feed Tube for condenser trap R/178/13 Receiving flask with S-35 cup (socket) joint capacity 1000 ml. R/178/15 Evaporating Flask Kjeldhal cap. 800 ml. B-24 R/178/17 Evaporating Flask Kjeldhal cap. 500 ml. B-24 R/178/19 Evaporating Flask Kjeldhal cap. 300 ml. B-24 R/178/21 Evaporating Flask Kjeldhal cap. 100 ml. B-24 R/178/23 Tension Spring to hold condenser. R/178/25 Wire Clip to holder vapour tube and boiling flask R/178/27 Ball joint clip S-35 R/180 Rotary Vacuum Evaporator, Model SUPERVAC (Diagonal Condenser).ALL CONTOLS AT THE PRESS OF A BUTTON. 4 line Alpha Numeric Digital display LCD screen.SIMULATANEOUS display on LCD Screen of R.P.M., Actual Temperature and Set Temperature.MOTORISED LIFT arrangement for glass assembly, Control up to 200mm. Lifting up/ down indication displayed on screen.Geared Dive Unit offers a smooth speed rotation, R.P.M. Control from 20 to 200 R.P.M. On/ off indication for Geared drive unit displayed on screen.Double walled water bath Temperature Control from ambient plus 5°C to 99°C. On/ off indication for Water bath displayed on screen.Glass condenser double coiled with three opening for vacuum and cooling, pear (kjeldhal) shaped evaporating flask capacity 800ml., receiver flask capacity one liter fitted with a ball join, feeding tube and vapour path tube a complete working until. The same unit can be supplied with round bottom one liter capacity evaporating flask instead of 800 ml. pear shape  

Applications: Equitron Roteva – Rotary vacuum evaporators are efficient laboratory distillation units for applications like standard solvent distillations, concentration of reaction mass or solutions, separation of solvents from extracts, crystallization and powder drying. Along with carefully designed accessories it becomes a work horse in any laboratory

Evator Rotary Evaporator The Ideal partner for all routine rotary vacuum evaporation's at Universities, Colleges, Schools, small to mid size Companies, and as a standby unit.Evator Advantages:-- Spark-less drive unit AC motor with assured speed regulation. -- Flask sizes from 100 to 1000 ml. -- Digital Temperature Controller for Water Bath. -- PTFE / glass sealing mechanism. -- Smooth, adjustable, maintenance free and user friendly single lever manual lift. -- Vertical Glass Set with 1000 ml B29 Evaporating Flask & 1000 ml S35 Receiving Flask, B29 plastic C Clip & S35 -- Ball Joint Clip--Flask ejector for easy removal of evaporating flask

DETAILS •LRE-100 series consists of a vertical condenser of 0.16 sq.m •Provides temperature range up to 180°C •Digital bath temperature setting provided •Borosilicate (Pyrex: G3.3) glassware material is used •Availability of automatic or manual lift type of bath and motor •PTFE bottom discharge valve. High vaporization rate •Vacuum level of >0.095Mpa •Use of PTFE Teflon seal •Epoxy painting and Explosion proof systems are the optional extra components APPLICATION Rotary evaporators are used for condensation, distillation, menstruum recycle, crystallization and separation of heat-sensitive materials. Moreover, they can perform the additional function of reflux extraction.

• Type: Stuart Rotary Evaporator
• Features: Quality, efficient evaporator at an affordable price, Digital control for reproducible results, Efficient flask and vapour tube ejection system.

World class Rotary Evaporators for R & D and Pharma lab from lab scale 1 litres to Pilot Plant scale 50 litres..

rotary vacuum evaporators, Polarimeter, Potentiometric Titrator

rotary vacuum evaporators, sterilization instruments, anaerobic jars

Rotary Vacuum Evaporator, FORCED CONVECTION OVEN, Crucible Furnace

We are leading manufacturer, supplier and exporter of industrial purpose rotary evaporator. The rotary evaporator is made from quality grade material that ensures longer functional life.

Rotary Evaporator, Autoclave, Soil Testing Instruments

Rotary Vacuum Film Evaporator, filter dryers, Rotocone Vacuum Dryers

Industrial Rotary Evaporator, vacuum controller, Water Jet Vacuum Pump