Rotex Solenoid Valves Dealers in Andheri East, Mumbai

We are offering solenoid valve airmatic 32 - pilot operated - compact series type : ss231 nc (normally closed)| ss232 no (normally open) sizes: 3 mm to 10 mm (g18 to g38) service :- compressed air 52 - pilot operated-compact series type : ss 252 single solenoid spring return with manual override sizes: 3 mm to 15 mm (g18 to g12) service :- compressed air 52 - pilot operated - compact series type : ds 252 double solenoid with manual override sizes: 3 mm to 15 mm (g18 to g12) service :- compressed air 53 - pilot operated - compact series type : dsh 253 dse 253 double solenoid with manual override sizes: 3 mm to 15 mm (g18 to g12) service :- compressed air types: dsh - pressure hold |dse - pressure exh.

4-way/3-position (tandem center) solenoid valve with Posi-CHeck® Application: Double-acting cylinders. Actuation: Solenoid operated, 115 volt, 50/60 Hz. Functions: Push button control of “advance,” “hold” and “return.” The Posi- Check® feature guards against pressure loss when shifting from “advance” to “hold.” With valve in “hold” position, cylinder ports are blocked and oil is directed from pump to reservoir. NOTE: Consult factory before installing a pressure switch on any of these valves. CAUTION: To prevent sudden, uncontrolled descent of a load as it is being lowered, use a Load Lowering Valve (No. 9596) or Counter Balance Valve (No. 9720) in conjunction with the directional valve used in your application. CAUTION: The Posi-Check® feature will not hold the load when shifted directly A to B-B to A or from hold to A or B. NOTE: Maximum tank line pressure for remote mounted valves is 500 psi.

• Packaging Type: Carton
• Voltage: 24 V AC, 24V DC, 110 V AC, 230 V AC
• Brand Name: CompAir Systems
• Material: Brass
• Warranty: 1 Year
• Country of Origin: India
• Media: Air
• Power: Solenoid, Hydraulic, Pneumatic
• Condition: New

We are offering Solenoid Valves.

• Material: PVC
• Media: Powder/Solids
• Brand Name: Janatics
• Volts: 220V AC
• Power: 6VA/5VA
• Type: AC23A
• PR Range: 2-10bar

  Danfoss solenoid valve bodies and electrical coils are normally supplied separately and then combined. They are assembled quickly and simply without tools, providing optimum product flexibility and availibility. If a coil does need to be replaced, it can be done without stopping or draining any system. The solenoid valves are also available as assembled units if required.

• Air, Oil, Water, Steam, Gas: ¼” to 2” BSP
• up to 18 kg/cm2: 100v / 240v / 24v.AC / 24v.DC

Our pneumatic solenoid valves are made from Brass, Carbon steel or Stainless steel.They are available in the following types:Plunger operatedDiaphragm typeGlobe type

Solenoid Valves, Hydraulic Pumps, cold rolling mills, counter balance valves