RTD Sensors Dealers in Chembur, Mumbai

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made.

TEMP TECH manufacturers Resistance Temperature Detectors (RTD’s) confirming to all international Standards like IEC 751 , GOST, BS-1904, DIN 43760, JIS C1604, 1606 etc…. All types of configurations are available and most of the RTD’s are custom made. Accuracy in measurement of Temperature, faster response, sturdiness, ease in maintenance and replacement are the main criteria of design. All RTD’s are calibrated in our Te

Resistance Temperature Detectors (RTD’s) are temperature sensing devices consisting of a wire coil or deposited film of pure metal, usually platinum. The element’s resistance increases with temperature in a known and repeatable manner. RTD’s exhibit excellent accuracy over a wide temperature range. Non standard size can be manufactured on request.

Head:Cast aluminium / Stainless steel   Assembly :3 - Wire Simplex / 6-wire duplex   Temp.range:- 200° to 449°   Immersion length:300 MM/in multiple of 100 MM   Sheath Dia.:6 MM and MOC : SS 316

Standalone, Lube Fuel Oil Oil Contamination Deterioration Monitor has no moving parts , temperature compensated , one touch calibration, with two level alarm set points , Low Flow detection and Metallic dust (bearing metalmill scale etc) detection . Extremely easy & simple installation. Prevent Major breakdowns . Can be used with Diesel Engines, Turbines, Hydraulic Cranes, Separators Transformers etc. Contact us for a complete engineered solution.

• Type: Simplex and duplex.
• Insulation of cables: 7/32 Teflon, Teflon/Teflon, Insulated.
• Type of cable: 2 core, 3 core, 4 core and 6 core.
• SS rod: 316 stainless steel material with 8mm diameter
• Mounting parts: 1/8 BSP, 1/4 BSP, 1/2 BSP and 3/8 BSP and without threading.
• Head: Aluminum with powder coated.
• Terminal: 2 or 3 wires for simplex , 4 or 6 wires for duplex
• SS rod: 316 stainless steel material with 8mm diameter
• Mounting parts: 1/8 BSP, 1/4 BSP, 1/2 BSP and 3/8 BSP and without threading

We manufacture different types of temperature sensors as per the specifications of the customer by using PT100 sensing element and maintain international quality. The element of PT100 sensors has been imported from Germany and the SS rod is made up of 316 stainless steel material, which enables it to withstand a high pressure vessel. The sensor has been designed in such a manner that it is well suited for temperature measurement in any industrial environment, especially around motors, generators and other high voltage equipment. The range of the PT 100 sensor varies from 0-400 degree.

RTD'S are high precision device used to measure temperatures in corrosive and non-corrosive media. They work on the principle of variation of resistance of a sensing element, usually made of Platinum, with corresponding change in temperature. These RTD's are available in following types : PT100, PT200, PT500, & PT1000 (AS PER DIN 43760 OR BS904 CLASS II) Pt50 (as per JIS) Simplex or Duplex. THERMOCOUPLE : A thermocouple is a sensor for measuring temperature. It consists of two dissimilar metals, joined together at one end which produce a small unique voltage at a given temperature. This voltage is measured and interpreted by a thermocouple thermometer.   These thermocouples are available in three types of hot junctions : The Grounded Junction : Recommended for the measurement of static or flowing corrosive gas or liquid temperature and for high pressure application. The junctions are welded to the protective sheath giving faster response. An Underground Junction : Used for measurement in corrosive application where it is desirable to have the thermocouple electronically isolated form and shielded by a seath. The junction is physically isolated from the sheath from MgO powder. An Exposed Junction : It is used for the measurement of static or flowing non-corrosive gas temperature where fast response time is required. The junction extends beyond the protective seath to give accurate and fast response. The seath insulation is sealed where the junction extends to prevent penetration or moisture or gas which would cause.       Types of Assemblies available: Terminal Block Type/ Whether Proof IP 65 Or Flame Proof head mount Hand Held Type.  Mineral Insulated Metal Sheath.  Transition Joint Type.  Quick Disconnect.  Thermocouple with special outer sheaths like silicon Carbide, PTF, PVDF coated etc. Mountings: Fixed male threaded, addittion, Gland type, Nipple - Union, Nipple assembly or adjustable flanged types, Bayonet type and others. Insulations: Multibore ceramic tubing / Magesium Oxide (MgO filled) / M.I. Ordering informations for Thermocouples and RTDs: Operating Range, RTD/Thermocouple's type & Class - [ K / J / T / E / B / R / S - Simplex or Duplex, ] Specify Wire Gauge in case of Thermocouple,  Type of RTD Element & Class  Head Assembly Weatherproof / Ex. Proof, Seath Material - Length & O.D.,  Extension cable material - It's covering length, Process connection, Wire connection - 2 Wire / 3 Wire / 4 Wire                          

• Range: - 50 to 400°C
• Lengths: upto 500 mm
• Protection Tubes (outer dimension): 7, 9, 11 and 12 mm
• Protection Tubes (Other materials available): SS316 and SS316L
• Features: Easy maintenance, Impact and vibration resistant, Leak proof joint, Aluminum head with threaded cap

RTD Sensor, Fire Detectors, Heating Elements, Thermostats

RTD Wire Type Cable, Mineral Insulated Thermocouples, Oil Heater